User Manual

33
Superimposed Text Information
Chapter 3 Preparations
a Type of time data
If the time data or user bits data cannot be read correctly,
they will be displayed with an asterisk. For example,
“T*R”, “U*R”, “T*R.” or “U*R.”.
b Timecode reader drop-frame mark (for 59.94i/
59.94P/29.97P mode only)
“.”: Indicates drop-frame mode.
“:”: Indicates non-drop-frame mode.
c Timecode generator drop-frame mark (for 59.94i/
59.94P/29.97P mode only)
“.”: Indicates drop-frame mode (factory default setting).
“:”: Indicates non-drop-frame mode.
d VITC field mark
“ ” (blank): Fields 1 and 3 (for 59.94i/59.94P/29.97P/
23.98P mode) or fields 1, 3, 5 and 7 (for 50i/50P/25P
mode)
“*”: Fields 2 and 4 (for 59.94i/59.94P/29.97P/23.98P
mode) or fields 2, 4, 6 and 8 (for 50i/50P/25P mode)
e Operation mode
The field is divided into two blocks as shown below.
• Block A displays the operation mode.
• Block B displays the servo lock status or playback speed.
Display Meaning
CNT Counter data
TCR TC reader timecode
UBR TC reader user bits data
TCR. VITC reader timecode
UBR. VITC reader user bits data
TCG TC generator timecode
UBG TC generator user bits data
Note
Display Operation mode
Block A Block B
STOP Stop mode
NEXT xxx Cuing up to the first frame of the
next clip.
PREV xxx Cuing up to the first frame of the
current clip.
F.FWD Fast forward search
F.REV Fast reverse search
AB
PLAY Playback mode (servo unlocked)
PLAY LOCK Playback mode (servo locked)
REC Record mode (servo unlocked)
REC LOCK Record mode (servo locked)
JOG STILL A still picture in jog mode
JOG FWD Jog mode in forward direction
JOG REV Jog mode in reverse direction
SHUTTLE STILL A still picture in shuttle mode
SHUTTLE (Speed) Shuttle mode
VAR STILL A still picture in variable mode
VAR (Speed) Variable speed mode
TOP 0001/xxxx Cuing up to the first frame of the
first clip.
END xxxx/xxxx Cuing up to the last frame of the
last clip.
PREROLL Cuing up during thumbnail search
COPY Transcode copy is being
executed.
CLOSE A clip is not selected.
MEDIA OUT No media is loaded.
Display Operation mode
Block A Block B