User Manual

24
Connections and Settings
Chapter 3 Preparations
Connections for cut editing
The following figure shows a cut editing system
comprising this unit as a player.
When making the connections, also refer to the manuals
provided with the equipment to be connected.
See page 25 for more information about editing control
unit settings.
When using an editing control unit
Using BVE-700/700A
The following figure shows a cut editing system
comprising this unit as a player, an HDW-M2000/M2000P
unit as a recorder, and a BVE-700/700A as an editing
control unit.
HD video monitor
To HDSDI input connector
1: 75Ω coaxial cable (not supplied)
2: 9-pin remote control cable (not supplied)
PMW-1000
(this unit, player)
Reference video signal
HDW-M2000
(recorder)
To HDSDI
input connector
HD video monitor
BVE-700/700A
(editing control unit)
To HDMI input connector
a)
3: HDMI cable (not supplied)
Recommend to use an optional Sony HDMI cable.
a) You can use setup menu item 161 (see page 80) to
set which signal to output from the HDMI OUT
connector: the same signal as the HDSDI
OUTPUT 2 (SUPER) connector output, or the
HDSDI signal and thumbnails view signal by
automatically switching between them.
or