User Manual

100
Specifications
Appendix
BNC type, SMPTE timecode, 0.5 to
18 Vp-p, 3.3 kΩ, unbalanced
Output connectors
Digital video outputs
HDSDI OUTPUT 1, 2 (SUPER)
BNC type (2), complying with SMPTE-
292M
SDSDI OUTPUT 1, 2 (SUPER)
BNC type (2), complying with SMPTE-
259M
HDMI OUT Type A 19-pin
Video: 1080i, 720P, 480i, 480P, 576i,
576P
Audio: Linear PCM, 48kHz/16-bit,
2 channels
Analog video outputs
COMPOSITE OUTPUT 1, 2 (SUPER)
BNC type (2), 1.0 Vp-p, 75 Ω, sync
negative, complying with SMPTE-
170M
Analog audio outputs
ANALOG AUDIO OUTPUT 1, 2
XLR 3-pin, male (2), +4 dBu, 600 Ω
load, low impedance, balanced
AUDIO MONITOR
XLR 3-pin, male (2), +4 dBu, 600 Ω
load, low impedance, balanced
PHONES Stereo phone jack, – to –13 dBu, 8 Ω,
unbalanced
Timecode output
TIME CODE OUT
BNC type, SMPTE timecode, 1.0 Vp-p,
75 Ω, unbalanced
Remote control connectors
REMOTE (9P) D-sub 9-pin, female, complying with
RS-422A
REMOTE 4-pin, female
DC 12 V, 7.5 W
(Network) RJ-45 type
1000BASE-T: complying with
IEEE802.3ab
100BASE-TX: complying with
IEEE802.3u
10BASE-T: complying with IEEE802.3
USB connectors
(front)
Super Speed USB (USB 3.0) Type-A
MAINTENANCE (rear)
High Speed USB (USB 2.0) Type-A (2)
Accessories supplied
Operation guide (1)
CD-ROM manual (1)
Accessories not supplied
AC power cord
For the customers in the U.S.A and Canada
Part number 1-551-812-41 (125 V, 10 A, about 2.4 m)
For the customers in the United Kingdom
Part number 1-777-823-12 (250 V, 10 A, about 2.0 m)
For the customers in European countries other than the
United Kingdom
Part number 1-551-631-61 (250 V, 10 A, about 2.0 m)
RCC-5G 9-pin Remote Control Cable
RM-280 Remote Edit Controller
BP-L80S Battery Pack
BKP-L551 Battery Adaptor
SxS memory cards
SxS PRO: SBP-8 (8 GB), SBP-16
(16 GB), SBP-32 (32 GB)
SxS PRO+: SBP-64B (64 GB),
SBP-128B (128 GB)
SxS-1: SBS-32G1 (32 GB), SBS-64G1
(64 GB), SBS-32G1A (32 GB),
SBS-64G1A (64 GB)
XQD memory cards
QD-H16 (16 GB), QD-H32 (32 GB),
QD-S32 (32 GB), QD-S64 (64 GB)
QDA-EX1 XQD Express Card Adapter
MEAD-MS01 Media Adapter (for “Memory Stick PRO-
HG Duo” HXA series)
MEAD-SD01 SD Card Adapter (for SDHC card)
Design and specifications are subject to change without
notice.