Operating Instructions

38 (GB)
When you name the setting, follow the steps below.
7 Press M / m to move the cursor (yellow) to “Name
Set” and press ENTER again.
The following menu appears on the display panel.
Use r Memor y
Save
Name Se t :M EM 0 1
0 12 3 4 5 6 7 8 9ABCDEFGH
I JKLMNOPQRSTUVWXYZ
abcdefghi jklmnopqr
stuvwxyz()[]<>+– /
=% & ; : . ' , End
set
,,, toselect, to
ENTER
8 Select a character in the character list with M / m /
< / , and press ENTER.
The selected character is input.
9 Repeat step 8 and after you have finished entering
the name, select “End” and press ENTER.
The menu returns to the Save menu.
Calling Up a Stored Setting
1 In the User Memory menu, press M / m to move the
cursor (yellow) to “Load” and press ENTER.
The following menu appears on the display panel.
, to select item
Use r Memor y
Load
Res t o r e
MEM 0 1
MEM 0 2
MEM 0 3
MEM 0 4
MEM 0 5
MEM 0 6
MEM 0 7
2 Move the cursor to the Memory Number (01~ 20)
of the setting that you want to recall using the
M /
m buttons.
The stored adjustment value is recalled.
To restore the value in effect before the recall,
move the cursor to “Restore.”
3 Press the ENTER button.
The display returns to the User Memory screen
used to store and recall adjustment values.
Using the Memory Function