4-676-072-11 (1) Read This First Operating Instructions 1 Setting up your CLIÉ™ handheld 2 Basic operations of your CLIÉ™ handheld 3 Connecting to the Internet 4 Have a try Taking pictures / Recording movies Recording a voice memo Listening to music Managing schedule events / addresses Viewing computer documents Using the Bluetooth® function CLIÉ™ handheld components Personal Entertainment Organizer PEG-UX50 PEG-UX40 © 2003 Sony Corporation
01US01COV.book Page 2 Friday, July 11, 2003 1:15 PM The following manuals are included with your CLIÉ handheld. Refer to the following together with this manual. Before you start using your CLIÉ handheld (This manual) Read This First (Operating Instructions) Explains the following: • Setting up your CLIÉ handheld and computer • Basic operations • What you can do with the applications For safe use, be sure to read the supplied “Safety & Regulations Guide”.
01US01COV.book Page 3 Tuesday, July 15, 2003 6:48 PM Before use Caution CAUTION IN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING WITHOUT LIMITATION LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASER’S TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE.
01US01COV.book Page 4 Friday, July 11, 2003 1:15 PM Table of Contents Setting up your CLIÉ™ handheld Connecting to the Internet Confirming the package contents . . . . . . . . . . . . . . . . 6 Preparing for the wireless LAN function . . . . . . . . . . . . . . . .35 Setting up your CLIÉ™ handheld . . . . . . . . . . . . . . . . 8 Step 1: Verifying the settings for the wireless LAN access point. . . . . . . . . . . . . . . . . . . 36 Step 1: Charging your CLIÉ handheld . . . . . .
01US01COV.book Page 5 Friday, July 11, 2003 1:15 PM Additional information . . . . . . . 85 Making a backup of the data or applications on your CLIÉ handheld . . . . . . . . . . . . . . . 85 Resetting your CLIÉ handheld to the factory setting . . . . . . . . . . . . . . . . . . . . . 86 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . 87 Customer Support and Customer Registration . . . . . . . . . . . . . . . . . . . . . . . 88 Notes on use. . . . . . . . . . . . . . . . . . . . . . . . .
01US01COV.book Page 6 Friday, July 11, 2003 1:15 PM Setting up your CLIÉ™ handheld This chapter explains how to charge your CLIÉ handheld and use it with your computer. Confirming the package contents Please confirm that all the following accessories are included in the package before setting up your CLIÉ handheld.
01US01COV.book Page 7 Friday, July 11, 2003 1:15 PM Strap (1) Refer to the illustration below to attach the strap. Read This First - Operating Instructions (1, this manual) Safety & Regulations Guide (1) Setting up your CLIÉ™ handheld Troubleshooting Q&A (1) Software license agreement (1) Other printed materials Make sure that the package contains all of the above contents. If any item is missing, contact the Sony Customer Information Service Center or a Sony dealer.
01US01COV.book Page 8 Friday, July 11, 2003 1:15 PM Setting up your CLIÉ™ handheld Perform the following before setting up your CLIÉ handheld. Step 1: Charging your CLIÉ handheld Step 2: Performing the initial setup after turning on your CLIÉ handheld for the first time Step 1: Charging your CLIÉ handheld Before using your CLIÉ handheld for the first time, be sure to fully charge the battery. To a wall outlet 1 2 3 Connect the AC power adapter to the charger cradle’s AC power adapter connector.
01US01COV.book Page 9 Friday, July 11, 2003 1:15 PM It takes about four hours to fully charge your CLIÉ handheld for the first time. The POWER LED turns off when charging is complete. Tip Step 2: Performing the initial setup after turning on your CLIÉ handheld for the first time The first time you turn on your CLIÉ handheld, you need to make some initial settings. Follow the on-screen instructions to complete the initial setup and to become familiar with operations of your CLIÉ handheld.
01US01COV.book Page 10 Friday, July 11, 2003 1:15 PM Turned style Put your CLIÉ handheld in the “turned style” to make it compact when you operate it with the stylus or use it in camera mode. b Open the display and rotate it clockwise until it clicks into place b Fold the display over the keyboard Note Do not apply too much force or rotate the display panel in the wrong direction. Closing the display panel Close the display panel by rotating it counterclockwise until it clicks into place.
01US01COV.book Page 11 Friday, July 11, 2003 1:15 PM 1 Slide down the POWER/HOLD switch. Your CLIÉ handheld turns on, and the Setup screen is displayed. Setting up your CLIÉ™ handheld b Slide down the POWER/HOLD switch Tips If you cannot turn on your CLIÉ handheld • Did you charge your CLIÉ handheld as described on page 8? bFor details, refer to the supplied “Troubleshooting Q&A”. • Perform a soft reset if you cannot turn on your CLIÉ handheld even after charging it (page 32). 2 Take out the stylus.
01US01COV.book Page 12 Friday, July 11, 2003 1:15 PM Notes • Never use a writing pen, pencil, or other sharp object instead of the stylus to write on your CLIÉ handheld, as the screen may get scratched. • When you put the stylus back in its holder, push it in until it clicks into place. 3 Press lightly on the screen with the stylus. This action is called “tapping”. The Setup screen for stylus digitizer is displayed.
01US01COV.book Page 13 Friday, July 11, 2003 1:15 PM 5 Tap the box next to [Set Time:]. The Set Time dialog box is displayed. Tip 6 Setting up your CLIÉ™ handheld You can reconfigure the date and time settings in the Preferences screen. bFor details, refer to “Customizing your CLIÉ™ handheld (Preferences): Setting up the Date & Time preferences” in the supplied “Handbook”. Tap v or V to set the current time. Tap each box to set the hour and minute. 7 Tap [OK].
01US01COV.book Page 14 Friday, July 11, 2003 1:15 PM 10 Tap the current month, then tap the current date. The Set Date screen closes. 11 Tap the box next to [Time Zone:]. The Set Time Zone screen is displayed. 12 Tap the region to set the time zone, then tap [OK]. 13 Tap V next to [Daylight Saving:] and select [On] or [Off].
01US01COV.book Page 15 Friday, July 11, 2003 1:15 PM Tap [Next]. 15 Tap [Next] and [Done]. Setting up your CLIÉ™ handheld 14 b The CLIE 3D Launcher is displayed. The initial setup is complete.
01US01COV.book Page 16 Friday, July 11, 2003 1:15 PM Using your CLIÉ™ handheld with your computer You can perform the following if you use your CLIÉ handheld with your computer. • Synchronize the latest schedules and addresses between your CLIÉ handheld and your computer. • Save a backup of your CLIÉ handheld data on your computer. • Transfer images and music files from your computer to your CLIÉ handheld.
01US01COV.book Page 17 Friday, July 11, 2003 1:15 PM Notes • Do not simply copy the Palm™ Desktop for CLIÉ folder from the supplied Installation CD-ROM to your computer. To install the software properly, follow the installation procedure described below. • If you have more than one CLIÉ handheld and the old version of Palm™ Desktop for CLIÉ has already been installed on your computer, follow the installation procedure below to upgrade to the new version.
01US01COV.book Page 18 Friday, July 11, 2003 1:15 PM 6 Click [Next]. The Setup Type window is displayed. 7 8 Select the setup type [Complete] or [Custom] and the destination folder if you select [Custom]. Click [Next]. The Select User window is displayed. 9 Click [Create New User] to create a new user name in the Select User window. You can enter any user name you prefer. Note If you have more than one CLIÉ handheld Enter a user name that is different from the one you use for another CLIÉ handheld.
01US01COV.book Page 19 Friday, July 11, 2003 1:15 PM Step 2: Connecting your CLIÉ handheld and computer via the USB cable Setting up your CLIÉ™ handheld You can synchronize data between your CLIÉ handheld and computer by connecting them with the supplied USB cable after installing Palm™ Desktop for CLIÉ. About the USB cable The supplied USB cable has two connectors. Connect the “A” plug to the USB port of your computer and the mini “B” plug to the USB connector of your CLIÉ handheld.
01US01COV.book Page 20 Friday, July 11, 2003 1:15 PM Step 3: Entering a user name for your CLIÉ handheld 1 Rotate the Jog Dial™ navigator to select (HotSync) on the CLIE 3D Launcher and press the Jog Dial™ navigator. The HotSync screen is displayed. Tip You can also tap 2 Tap (HotSync) to display the HotSync screen. (HotSync) in the HotSync screen. The HotSync® operation starts and the installation for the required software starts automatically. 3 Click [OK] in the Users window of your computer.
01US01COV.book Page 21 Friday, July 11, 2003 1:15 PM Synchronizing data between your CLIÉ handheld and computer (the HotSync® operation) The HotSync® operation is an easy operation that allows you to synchronize data between your CLIÉ handheld and your computer, back up the data of your CLIÉ handheld to your computer, and install add-on applications. b For details, refer to “Exchanging and updating files/data using the HotSync® operation (Other HotSync® operations)” in the supplied “Handbook”.
01US01COV.book Page 22 Sunday, July 13, 2003 3:59 PM 5 Tap (HotSync) in the HotSync screen. The HotSync® operation starts. When the HotSync® operation is complete, the following screen is displayed. 6 Double-click window. (Palm Desktop for CLIÉ) on your computer Palm™ Desktop for CLIÉ starts and the Date Book window is displayed. If you select the same date you entered in Step 2, you will see the schedule for that day.
01US01COV.book Page 23 Friday, July 11, 2003 1:15 PM To display other application windows (Address Book, To Do List, and Memo Pad) Click any icon on the left side of the window. You can also synchronize data between your CLIÉ handheld and computer using the wireless LAN function. b For details, refer to “Exchanging and updating files/data using the HotSync® operation (Other HotSync® operations): Performing the HotSync® operation via a wireless LAN (for PEG-UX50 only)” in the supplied “Handbook”.
01US01COV.book Page 24 Friday, July 11, 2003 1:15 PM Basic operations of your CLIÉ™ handheld This chapter explains how to turn on/off your CLIÉ handheld, start an application, enter text, turn it off using Power Saving Mode and perform a reset. Turning on/off your CLIÉ™ handheld Turning on your CLIÉ handheld Slide down the POWER/HOLD switch. Your CLIÉ handheld turns on, and the last screen you viewed is displayed.
01US01COV.book Page 25 Friday, July 11, 2003 1:15 PM Turning off your CLIÉ handheld Slide down the POWER/HOLD switch again. Tip If you do not use your CLIÉ handheld for long periods of time, you can save the battery power using Power Saving Mode. b For details on Power Saving Mode, refer to “Turning off your CLIÉ™ handheld using Power Saving Mode” on page 30. To work with your CLIÉ handheld, you need to start an application. The following explains how to start an application.
01US01COV.book Page 26 Friday, July 11, 2003 1:15 PM 2 Selecting an application 1 Rotate the Jog Dial™ navigator to select an application to start. An application is selected. b Rotate up or down 2 Press the Jog Dial™ navigator. The selected application starts. b Press Tip To select an application easily If you press the BACK button while the CLIE 3D Launcher is displayed, (Pointer) moves to the scroll bar on the right.
01US01COV.book Page 27 Friday, July 11, 2003 1:15 PM 3 Quitting the application You do not need to save data manually on your CLIÉ handheld as you do on a computer, although some applications require data be saved. b For details, refer to the “CLIÉ Application Manual” installed on your computer. To switch from one application to another, you need to display the CLIE 3D Launcher again. You can use either of the following methods to display the CLIE 3D Launcher.
01US01COV.book Page 28 Friday, July 11, 2003 1:15 PM 2 Tap the application icon. The selected application starts. Pressing the application buttons You can also start the applications by pressing the application buttons.
01US01COV.book Page 29 Friday, July 11, 2003 1:15 PM Entering text There are five ways to enter text into your CLIÉ handheld. You can use whichever is the most comfortable for you. z Hardware keyboard (page 103) z Handwriting system There are two ways of using the handwriting system. b For details, refer to “Entering text on your CLIÉ™ handheld” in the supplied “Handbook”. Graffiti® 2 You can enter text using a stroke recognition program, Graffiti® 2.
01US01COV.book Page 30 Friday, July 11, 2003 1:15 PM Turning off your CLIÉ™ handheld using Power Saving Mode To use your CLIÉ handheld over an extended period of time, you can save the battery power of your CLIÉ handheld by using Power Saving Mode when turning off your CLIÉ handheld. Normally, the battery power is consumed to preserve saved data within your CLIÉ handheld. This occurs even when your CLIÉ handheld is turned off.
01US01COV.book Page 31 Friday, July 11, 2003 1:15 PM 3 Tap [Turn Off]. The Turn off dialog box is displayed. 4 Tap [Yes]. The data of your CLIÉ handheld is saved in Power Saving Mode. The data will be automatically restored next time you turn on your CLIÉ handheld. 1 Basic operations of your CLIÉ™ handheld To erase the saved data Tap at the top right of the Preferences screen and select [Power Saving]. The Power Saving screen is displayed. 2 Tap (Menu). The menu is displayed.
01US01COV.book Page 32 Friday, July 11, 2003 1:15 PM Restarting your CLIÉ™ handheld Normally, you do not need to reset your CLIÉ handheld. However, if your CLIÉ handheld does not turn on or respond, performing a soft reset may solve the problem. To reset your CLIÉ handheld, follow the procedure below. Performing a soft reset All records and add-on applications stored on your CLIÉ handheld are retained even after performing a soft reset. Gently press the RESET button with the stylus.
01US01COV.book Page 33 Friday, July 11, 2003 1:15 PM Performing a hard reset If the soft reset does not solve the problem, you will need to perform a hard reset to restart your CLIÉ handheld. Notes 1 2 Slide down and hold the POWER/HOLD switch. Press the RESET button gently with the stylus, and then release the stylus. Note Keep the POWER/HOLD switch held down.
01US01COV.book Page 34 Friday, July 11, 2003 1:15 PM 4 Press (Page Up) on the hardware keyboard. Press (Page Up) Tip If you want to cancel the hard reset, press any key other than (Page Up). The Backup data dialog box is displayed. 5 Tap [No] after verifying the message on the dialog box. The hard reset is performed. (All records and add-on applications stored on Internal Media will be retained.) Tip When you tap [Yes], the last data you saved will be restored on your CLIÉ handheld.
01US01COV.book Page 35 Friday, July 11, 2003 1:15 PM Connecting to the Internet This chapter explains how to connect to the Internet using the wireless LAN function. Connecting to the Internet Notes • The wireless LAN function is available for PEG-UX50 only. • You can also access the Internet using the Bluetooth® function.
01US01COV.book Page 36 Friday, July 11, 2003 1:15 PM Step 1: Verifying the settings for the wireless LAN access point (Page 36) To connect to the Internet using the wireless LAN function, verify the settings for the wireless LAN access point. Step 2: Preparing the check sheet (Page 37) Prepare the check sheet to record the settings provided by your System Administrator and Internet Service Provider (ISP). For more information you need, ask your System Administrator or Internet Service Provider.
01US01COV.book Page 37 Friday, July 11, 2003 6:45 PM Step 2: Preparing the check sheet You can enter the settings for connecting to the Internet using the wireless LAN function in this check sheet. The settings you enter will be needed in “Step 3: Setting up the wireless LAN function” (Page 38), “Setting up NetFront v3.0 for CLIE” (Page 40), and “Setting up CLIE Mail” (Page 43).
01US01COV.book Page 38 Friday, July 11, 2003 1:15 PM Step 3: Setting up the wireless LAN function You need to set up the wireless LAN function, referring to the settings you recorded on the check sheet. 1 Tap tap (Prefs) in the CLIE 3D Launcher to start Preferences, then at the top right of the screen and [Network]. The Network screen is displayed. 2 Tap [ Service:], then tap [Wireless LAN] and [Details...]. The Wireless LAN Setup screen is displayed. 3 Tap (Menu). The menu is displayed.
01US01COV.book Page 39 Friday, July 11, 2003 7:01 PM A SSID Enter the setting for 1 SSID recorded on the check sheet. Note Alphabet input is case sensitive. B WEP Key Enter the setting for 2 WEP Key recorded on the check sheet. C Adhoc mode You can communicate with other wireless LAN compatible devices (e.g. wireless LAN enabled PC) without connecting to the wireless LAN access point when [Adhoc mode:] is selected. Note You cannot select [Power Save:], when [Adhoc mode:] is selected.
01US01COV.book Page 40 Friday, July 11, 2003 1:15 PM Browsing websites You can access the Internet via the wireless LAN access point using NetFront v3.0 for CLIE. Setting up NetFront v3.0 for CLIE 1 Select (NetFront 3.0) in the CLIE 3D Launcher to start NetFront v3.0 for CLIE. The browser screen is displayed. 2 Tap (Menu) and [NetFront Settings] from [Options]. The first page of the NetFront Settings screen is displayed.
01US01COV.book Page 41 Friday, July 11, 2003 1:15 PM 4 Set up the connection method. B Enable auto-dialing You can access the Internet automatically without displaying the Prompt dialog box when [Enable auto-dialing] is selected. C On termination You can select how NetFront v3.0 for CLIE closes. [Never Disconnect]: keeps your connection to the Internet open for use with other applications. [Disconnect]: disconnects from the Internet when NetFront closes or another application is started.
01US01COV.book Page 42 Friday, July 11, 2003 1:15 PM Browsing websites by connecting to the Internet via the wireless LAN access point 1 Select (NetFront 3.0) in the CLIE 3D Launcher to start NetFront v3.0 for CLIE. The browser screen is displayed. 2 Tap (Off line) . The Prompt dialog box is displayed. Tip When [Enable auto-dialing] is selected in the second page of the NetFront Settings screen, the connection automatically starts. 3 Tap [OK].
01US01COV.book Page 43 Friday, July 11, 2003 1:15 PM Disconnecting the connection Tap (On line) in the browser screen to disconnect the connection. (Off line) is displayed when your CLIÉ handheld is disconnected from the Internet. b For details on the Internet connection, refer to “Internet/E-mail” in the “CLIÉ Application Manual” installed on your computer. Sending/Receiving e-mail messages Setting up CLIE Mail 1 Select (CLIE Mail) in the CLIE 3D Launcher to start CLIE Mail.
01US01COV.book Page 44 Friday, July 11, 2003 1:15 PM 5 Enter 9 E-mail address recorded on the check sheet, then tap [Next]. The New Account screen for [E-mail Server Names] is displayed. 6 Enter 0 Incoming mail server (POP3) and qa Outgoing mail server (SMTP) recorded on the check sheet, then tap [Next]. The New Account screen for [Internet Mail Logon] is displayed. 7 Enter qs Mail account name/User name and qd Mail account password/User password, and tap [Next].
01US01COV.book Page 45 Friday, July 11, 2003 1:15 PM Sending e-mail messages You can send e-mail messages with CLIE Mail. 1 Select (CLIE Mail) in the CLIE 3D Launcher to start CLIE Mail. The CLIE Mail screen is displayed. 2 Tap (New). The Edit screen is displayed. 3 Enter the e-mail address of receiver, a subject, and text. Connecting to the Internet A To Enter the mail address of the receiver. B Subject Enter a subject for the e-mail. C Enter the e-mail text. 4 Tap [Send] and [Send Now].
01US01COV.book Page 46 Friday, July 11, 2003 1:15 PM Receiving e-mail messages You can receive e-mail messages with CLIE Mail. 1 Tap (Receive) in the CLIE Mail screen. After connecting to the Internet, the Communication Status screen is displayed and you can receive e-mail messages. 2 Tap [OK]. The received mail is displayed in [Inbox] in the CLIE Mail screen. 3 Tap (On line). (Off line) is displayed when disconnected. 4 Tap the received mail. The text of the received mail is displayed.
01US01COV.book Page 47 Friday, July 11, 2003 1:15 PM Have a try Enjoying image files You can take pictures and view image files using your CLIÉ handheld as a digital still camera. Have a try • Application to be used: – Taking pictures: CLIE Camera – Viewing image files: CLIE Viewer b For details, refer to “Still images” in the “CLIÉ Application Manual” installed on your computer. Taking pictures 1 Press the CAPTURE/REC button to start CLIE Camera.
2 Point the built-in camera directly at the subject by rotating the camera lens. 3 Position the subject in the viewfinder and press the CAPTURE/REC button. A picture is taken. Tip You can also tap (CAPTURE) on the CLIE Camera screen to take a picture. Viewing image files You can view image files using CLIE Viewer. b For details, refer to “Viewing handwritten memos and image files, and playing back voice memos” on page 55. Tip You can also tap Viewer.
01US01COV.book Page 49 Friday, July 11, 2003 1:15 PM Enjoying image files Getting Ready Taking pictures CLIE Camera................................................................................ page 74 Importing image files from your computer Image Converter........................................................................... page 76 Viewing/Selecting Viewing/Selecting image files by searching from the list Utilizing features Organizing image files in albums CLIE Album........................
01US01COV.book Page 50 Friday, July 11, 2003 1:15 PM Enjoying movies You can record movies using your CLIÉ handheld as you do with digital video camera. Movie files are saved on a “Memory Stick” media or Internal Media. • Applications to be used: – Recording movies: Movie Recorder – Viewing movies: Movie Player or CLIE Viewer b For details, refer to “Movies” in the “CLIÉ Application Manual” installed on your computer.
3 Position the subject in the viewfinder and press the CAPTURE/REC button. Movie recording starts. Tip You can also tap (REC) on the Movie Recorder screen to record. 4 Press the CAPTURE/REC button again to stop recording. You can view movies using CLIE Viewer or Movie Player. b For details, refer to “Viewing handwritten memos and image files, and playing back voice memos” on page 55.
01US01COV.book Page 52 Friday, July 11, 2003 1:15 PM Enjoying movies Getting Ready Recording movies Movie Recorder............................................................................page 77 Importing movie files from your computer Image Converter ...........................................................................page 76 Giga Pocket Plugin.......................................................................
01US01COV.book Page 53 Friday, July 11, 2003 1:15 PM Recording a voice memo (Voice Recorder) You can record sounds using the built-in microphone of your CLIÉ handheld. You can also use the voice memo as an alarm sound or attach it to an e-mail. • Applications to be used: – Recording a voice memo: Voice Recorder – Playing back a voice memo: Voice Recorder or CLIE Viewer b For details, refer to “Voice Recorder” in the “CLIÉ Application Manual” installed on your computer.
01US01COV.book Page 54 Friday, July 11, 2003 1:15 PM 3 Press the CAPTURE/REC button again to stop recording. Tip You can also tap screen to stop recording. or in the Voice Recorder Playing back a voice memo You can play back a voice memo using Voice Recorder or CLIE Viewer. b For details on Voice Recorder, refer to “Voice Recorder” in the “CLIÉ Application Manual” installed on your computer.
01US01COV.book Page 55 Friday, July 11, 2003 1:15 PM Viewing handwritten memos and image files, and playing back voice memos You can use CLIE Viewer to view handwritten memos, image files, and movie files, and to play back the voice memos saved on your CLIÉ handheld, Internal Media, or “Memory Stick” media. These different types of files are arranged by date so you can easily find the file you want to open.
01US01COV.book Page 56 Friday, July 11, 2003 1:15 PM 2 Rotate the Jog Dial™ navigator to select the file you want to display and press the Jog Dial™ navigator. The selected file is displayed or played back. Tips • You can also tap the file to display or play it back. • The files are displayed by date of creation.
01US01COV.book Page 57 Friday, July 11, 2003 1:15 PM Listening to music You can listen to music on your CLIÉ handheld by transferring music files from your computer to the Internal Media of your CLIÉ handheld or to a “Memory Stick” media inserted into your CLIÉ handheld. b For details, refer to “Using your CLIÉ™ handheld with your computer” on page 16. 2 Install SonicStage and Data Export on your computer. b For details, refer to “Music” in the “CLIÉ Application Manual” installed on your computer.
01US01COV.book Page 58 Friday, July 11, 2003 1:15 PM Playing back music data 1 2 Select (Audio Player) in the CLIE 3D Launcher to start Audio Player. Tap (Playback) to play music. Tap (Stop) to stop the music. Playback Stop Tip You can use separately sold headphones. (Your CLIÉ handheld accepts stereo mini-jack headphones.
