User Guide

Customizing your CLIÉ™ handheld (Preferences) 79
Setting the Network preferences for a wireless
LAN (for PEG-UX50 only)
Setting a wireless LAN access point manually
1 Tap V at the top right corner of the Preferences screen, and
select [Network].
2 Tap [V Service:], and select [Wireless LAN].
3 Tap [Details...].
The Wireless LAN Setup screen is displayed.
4 Tap (Menu).
The SSID menu is displayed.
5 Tap [New...] from [SSID].
The SSID Setup screen is displayed.
6 Enter the SSID into [SSID:].
7 Tap [-Not Used-] next to [WEP Key:].
The WEP Key screen is displayed.
8 Enter WEP Key, and then tap [OK].
The WEP Key screen is closed.
9 Perform the following procedures if necessary:
1 Adhoc mode:
Your CLIÉ handheld can communicate directly with other wireless
LAN compatible devices without using a wireless LAN access point.
To use a wireless LAN communication in this mode, tap next to
[Adhoc mode:] to change to . Then, tap [
V
1ch], and select the
channel number to use for the wireless LAN communication.
Continued on next page
• • • • • • • • • • • • • • • • • • •