Read This First Operating Instructions

Setting your Sony CLIÉ™ handheld

Notes

• Always use the point of the stylus for tapping or making strokes on the CLIÉ

handheld screen. Never use a real pen, pencil, or other sharp object to write on

the screen.

• When you put the stylus back in its holder, push it in until it clicks into place.

Press lightly on the screen with the stylus.

This action is called “tapping.”

The Setup screen for digitizer calibration is displayed.

Following the on-screen instruction, tap the center of the

displayed mark.

Also tap the center of the following displayed targets in the lower right

corner and the center of the screen.

Note

If the digitizer is not configured correctly, the

scroll bar may not operate properly, “tapping”

may not work as expected, or other problems

may occur. For re-configuring the digitizer, refer

to “Customizing your Sony CLIÉ™ handheld

(Preferences): Adjusting the Digitizer” in the

“Handbook.”

After calibration is completed, a screen for setting the time and date

appears.

Press lightly on the

screen (Tap)

Continued on next page

• • • • • • • • • • • • • • • • • • • • •