4-657-550-11(1) Chapter 1 Playing audio files (Audio Player) Chapter 2 Add-on Application Guide Viewing image files (PictureGear Pocket) Chapter 3 Playing a movie (gMovie player) Chapter 4 Setting the Memory Stick automatic start function (MS Autorun) Personal Entertainment Organizer Chapter 5 Copying the data to the Memory Stick media on your CLIÉ handheld (MS Import/Export) PEG-N760C Chapter 6 Troubleshooting © 2001 Sony Corporation
On the supplied software • Copyright laws prohibit reproducing the software or the software manual in whole or in part, or renting the software without the permission of the copyright holder. • In no event will SONY be liable for any financial damage or loss of profits, including claims made by third parties, arising out of the use of the software supplied with this player.
Table of Contents Chapter 1 Playing audio files (Audio Player) What you can do with the Audio Player ..................................... 8 To enjoy MP3 format audio files on your CLIÉ handheld ............................ 9 To enjoy ATRAC3 format audio files managed by OpenMG Jukebox on your CLIÉ handheld ..................... 10 Installing audio software ............... 11 System requirements ....................... 11 Installing RealJukebox for Sony software ..........................................
Viewing image files stored in your CLIÉ handheld ........................ 67 Transferring image files to your CLIÉ handheld ................................. 67 Viewing image files with your CLIÉ handheld ................................. 69 Viewing image files stored in Memory Stick media ...................... 73 Copying image files ....................... 75 Saving image files stored on your CLIÉ handheld to a Memory Stick media (Export) .................................
About this manual Welcome to the Sony Personal Entertainment Organizer (referred to as the “Sony CLIÉ Handheld” or “CLIÉ handheld” in this manual). Your Sony CLIÉ Handheld comes with three manuals: Read This First The Read This First manual gives an overview of your CLIÉ handheld’s features, hardware and software setup, installation instructions, and other important details. Before reading the other manuals, read the Read This First manual.
Playing audio files (Audio Player) This chapter explains how to play audio files on your CLIÉ handheld.
What you can do with the Audio Player Audio Player is an application used to play audio files on your CLIÉ handheld. It is pre-installed on your CLIÉ handheld, so you do not have to install it. You can play both MP3 and ATRAC 3 format audio files. In addition, you can use various playback displays such as Visual Effect view or List view. Audio Player Ver.2.1 supports MP3 files that meets the following specifications. • Format: MP3 (MPEG-1 Audio Layer-3) • Sampling frequency: 44.
Chapter 1 To enjoy MP3 format audio files on your CLIÉ handheld You need the following applications and media: • AudioPlayer Version 2.1 application (pre-installed on your CLIÉ handheld) for managing MP3 format audio file on your CLIÉ handheld. Playing audio files (Audio Player) • Any software for managing MP3 format audio file on your computer. The RealJukebox 2 Basic for Sony software (hereinafter referred to as RealJukebox for Sony) is supplied for this use in the installation CD-ROM.
What you can do with the Audio Player To enjoy ATRAC3 format audio files managed by OpenMG Jukebox on your CLIÉ handheld You need the following applications and media: • AudioPlayer Version 2.1 application (pre-installed on your CLIÉ handheld) for managing ATRAC3 format audio file on your CLIÉ handheld. • OpenMG Jukebox software (supplied in the installation CD-ROM) for managing ATRAC3 format audio file on your computer. • MagicGate Memory Stick media (not supplied).
Installing audio software You do not have to install Audio Player on your CLIÉ handheld System requirements • Operating System: Windows® 98/Windows® 98 Second Edition/ Windows® 2000 Professional/Windows® Me (manufacturer installed) The following environments are not supported: – Windows® 95, Windows NT® – A system upgraded from Windows® 3.
Installing audio software Installing RealJukebox for Sony software Install the RealJukebox for Sony software to the hard disk of your computer. Note If the “Installing:” message continues to appear without advancing to the next step for some time, click the “InstallShield Wizard” on the taskbar. 1 Exit all applications and follow the steps below on your computer. 2 Insert the installation CD-ROM into the CD-ROM drive of your computer. The setup program starts automatically.
After installing the RealJukebox for Sony software, you need to change the recording preferences of the RealJukebox for Sony to encode MP3 audio files. 1 Playing audio files (Audio Player) Double-click the RealJukebox icon on your Windows desktop, or click Start, point to Programs, Real, RealJukebox, and then click RealJukebox. RealJukebox starts. 2 3 4 5 6 Chapter 1 Setting recording preferences Click Preferences from the Tool menu. Click the Audio Quality tab.
Installing audio software Installing OpenMG Jukebox software Notes on using OpenMG Jukebox with Windows 2000/ Windows Me Notes on using OpenMG Jukebox with Windows 2000 OpenMG Jukebox software users with Windows 2000 models should be aware of the following: • Only Administrators are allowed to install and uninstall the OpenMG Jukebox software. • To use the application, log on with the user name Administrator or Power User.
Note If you already have OpenMG Jukebox installed If you have the following devices, OpenMG Jukebox Ver.1.x may already be installed on your computer. • VAIO Music Clip MC-P10 • Network Walkman NW-E3 • Memory Stick Walkman NW-MS7 Get and install the plug-in files for your devices. To get the plug-in files, refer to the following Web page. http://sony.com/walkmanproductsupport Notes on managing audio files with OpenMG Jukebox Ver. 1.x • Audio files registered using OpenMG Jukebox Version 1.
Installing audio software Installing the OpenMG Jukebox software Install the OpenMG Jukebox software to the hard disk of your computer. Notes • Be sure to install the software before placing your CLIÉ handheld in the transfer mode on the cradle. Do not install the software while a dedicated USB cable is connected to your computer. • If the “Installing:” message continues to appear without advancing to the next step for some time, click the “InstallShield Wizard” on the taskbar.
Importing audio files into your computer Chapter 1 If you manage your audio files with RealJukebox software This manual describes the basic operations. For more information regarding RealJukebox, please refer to the online manual. • A RealJukebox FAQ and user help section can be found at http://service.real.com/rjoptions.html The RealJukebox software is the product of RealNetworks, Inc.
Importing audio files into your computer To pause recording Click (Pause). The recording is paused. To resume recording, click (Record) again. When resumed, recording starts from the beginning of the song that was previously paused. If you want to record only specific tracks 1 Click “No, I do not record the CD at this time” in step 3 of “Recording audio CDs onto the hard disk” (page 17) . 2 Click to clear the check box of songs that you do not want to record.
Note Do not remove your CLIÉ handheld while you use OpenMG Jukebox software. Chapter 1 If you manage your audio files with OpenMG Jukebox software Recording audio CDs onto the hard disk 1 Double-click the OpenMG Jukebox icon on the Windows desktop, or click Start, point to Programs, OpenMG Jukebox, and then click OpenMG Jukebox. OpenMG Jukebox starts. 2 Insert the CD you want to record into the CD-ROM drive of your computer. The CD window and the tracks of the audio CD appear.
Importing audio files into your computer 3 Select the recording bit rate. From the drop-down list, select the bit rate for recording. If you accidentally clear the (check mark) of a song you want to record, click the song number again. 4 Confirm that a (check mark) appears by the songs you want to record. To clear the songs you do not want to record, click the song numbers (track numbers). The (check mark) disappears. 5 Click (Rec to Jukebox). Recording starts.
About Bit Rates What is an Electronic Music Distribution (EMD) service? EMD stands for Electronic Music Distribution, which is a generic name for services that distribute digital audio content via the Internet or other kinds of networks. To use an EMD service supporting OpenMG You must be able to access the Internet from your computer. Sign up with an Internet service provider, properly configure your computer, and configure the settings of your Web browser before using this service.
Importing audio files into your computer To use an EMD service 1 Click the Internet tab to display the Internet window. An introduction to the OpenMG Home Page appears on the window. [Internet] tab 2 Click the button or logo on the window. The connection to the Internet starts and the OpenMG Home Page appears. The OpenMG Home Page provides a guide to EMD service Web sites that support OpenMG and information on how to use EMD services.
Import downloaded audio files to OpenMG Jukebox. If audio files are imported automatically, they are registered as playlists, determined by the EMD service. If they are not imported automatically, select the audio files you want in the Import window and then import to OpenMG Jukebox (see “Importing MP3, WAV and WMT format audio files” below). Hint • You can also import audio files from software such as Liquid Player into OpenMG Jukebox. Refer to the OpenMG Home Page (http://www.openmg.com/) for details.
Importing audio files into your computer Notes on importing MP3 files To import MP3 files to the supplied OpenMG Jukebox software using the Windows® 98 operating system, Microsoft® Windows Media™ Player Version 6.4 or later is necessary. If Windows Media™ Player is not installed on your computer, it can be downloaded from the OpenMG Web site (http://www.openmg.com/us/).
Click the Import tab to display the Import window. Import tab Chapter 1 7 Bit Rate drop-down list Playing audio files (Audio Player) Format drop-down list File Tree view File List view 8 Select the audio format you want to import from the Format drop-down list. 9 To import data while converting it into the ATRAC3 format, select the recording bit rate (see page 21) from the Bit Rate drop-down list.
Importing audio files into your computer 12 Click to select the desired Playlist on the right side of the window, and then click (Import). The audio file you selected in step 11 can be imported into the Playlist. Based on the setting made in step 4, the file is imported in its original format or converted into the ATRAC3 format. Notes • The original MP3/WAV files imported are referenced to by the OpenMG Jukebox when playing back or Checking-Out the data.
Transferring audio files from your computer to your CLIÉ handheld 1 Memory Stick indicator The Memory Stick indicator lights in orange while accessing a Memory Stick media Note If you want to transfer and play ATRAC 3 format audio files that are recorded by OpenMG Jukebox, use MG Memory Stick media. 2 On the home screen, rotate the Jog Dial navigator to select AudioPlayer and then press the Jog Dial navigator. Or, tap the AudioPlayer icon on the home screen.
Transferring audio files from your computer to your CLIÉ handheld Audio Player starts. 3 4 Place your CLIÉ handheld on the cradle. Tap Menu , Options, and then Transfer. The CLIÉ handheld enters the file transfer mode. Proceed to transferring audio files (page 29). When you use Audio Player • Once transferring has started, do not do any of the following until transferring is complete. – Disconnect the USB cable. – Remove the MG Memory Stick. – Remove your CLIÉ handheld from the cradle.
Chapter 1 Transferring MP3 format audio files to your CLIÉ handheld After preparing your CLIÉ handheld as described on page 27-28, you can copy MP3 format audio files to your CLIÉ handheld using the Windows Explorer. Double-click the My Computer icon on your Windows desktop. 2 3 Double-click the Removable Drive icon. Double-click the Palm, Programs, and then MSAudio folder. If these folders do not exist, create them manually in the Memory Stick media using Windows Explorer.
Transferring audio files from your computer to your CLIÉ handheld Transferring audio files managed with OpenMG Jukebox Make sure to finish preparing your CLIÉ handheld as described on pages 27-28. You can only use a MG Memory Stick media (color: white) to transfer audio files. 1 2 Start OpenMG Jukebox. Click the Check-In/Out tab to display the Check-In/CheckOut window. Your computer recognizes the CLIÉ handheld and a list of audio files appears on the right side of the window.
Click (Out). Check-Out starts and the song(s) is added to the end of the song list in your CLIÉ handheld. Note To stop Check-Out Click (Stop). Note Once Check-In has started, do not do any of the following until the Check-In/Out is complete. • Disconnect the USB cable. • Remove the MG Memory Stick media. • Remove your CLIÉ handheld from the cradle. • Tap Exit on the Audio Player. • Press any application buttons on your CLIÉ handheld or the HotSync button on the cradle. • Tap Home .
Playing audio files on your CLIÉ handheld Connecting/attaching the supplied headphones The headphones supplied with your CLIÉ handheld include a turning mechanism for easy wearing. Connecting the headphones to your CLIÉ handheld 1 Connect the headphones to the mini-plug of the supplied remote controller. 2 Connect the connecting cord of the remote controller to the headphones jack of your CLIÉ handheld.
1 Holding the cap (housing) with your thumb and index finger, rotate the hanger with your middle finger until it fully opens. Chapter 1 Putting on the headphones Hanger Playing audio files (Audio Player) Cap (housing) 2 Put the hanger on your ear, keeping it open. 3 Pivot the cap (housing) to best fit your ear. Note Put the hanger with the “R” mark on your right ear, and the hanger with the “L” mark on your left ear.
Playing audio files on your CLIÉ handheld Playing audio files You can play audio files using the Audio Player. You can also use other applications during playback. Charge the battery before starting playback. Notes • The automatic shut-off does not function during playback. • If the battery power level runs low, playback stops automatically. In this case, however, you can still use other applications such as Memo Pad or Address Book. Charge the battery before it becomes completely empty.
Tap . Chapter 1 4 Playback starts from the first song. The track information appears during playback. If you cannot start playback Make sure that the HOLD switch on your CLIÉ handheld is not set to HOLD. To stop playback Tap . On other operations Pause Go to the beginning of the current track Go to previous tracks Go to the beginning of the next track Go to the beginning of succeeding tracks Go backward Go forward Tap Tap Tap Tap Tap Tap Tap . . repeatedly. . repeatedly. continuously.
Playing audio files on your CLIÉ handheld Adjusting the volume You can adjust the volume in the following ways: • Tap or . • Rotate the Jog Dial navigator.* • Press the scroll buttons of the CLIÉ handheld. * Only if you select 1 (Volume Control) in the Jog function select screen (page 40). Protecting your hearing (AVLS) The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your ears. To use AVLS, tap to change it to .
Chapter 1 Playing in various modes Playing tracks repeatedly Tap the repeat button to select the desired repeat playback item. • REP OFF: normal playback • REP 1: repeats current playback track You can use repeat playback during shuffle or reverse playback For example, when you set shuffle playback to On during repeat playback, Audio Player plays all tracks repeatedly in random order. Repeating a specific part of a song (A-B repeat function) You can choose to play a specific part of a song repeatedly.
Playing audio files on your CLIÉ handheld Selecting playback audio files (Pick up) You can choose to only play the audio files that you select. 1 Tap Menu , Tools, and then PickUp. The PickUp screen appears. 2 Tap to select the check boxes of the audio files that you want to play. 3 4 After selecting, tap OK. Start playback. Audio Player plays only the selected audio files. To play all audio files Tap Select All in the Pick up screen.
You can switch the display. Choose from the following three. • Normal view: Displays the title and artist name of the currently playing audio file, the number of audio files, and playback controls. In Visual Effect view, you can change the effect by tapping Playing audio files (Audio Player) • Visual Effect view: Displays the visual effect or spectrum analyzer with playback progress. Playback controls are also displayed. .
Playing audio files on your CLIÉ handheld Switching the Jog Dial navigator function for Audio Player You can select the Jog Dial navigator function for when you use the Audio Player. You can select to either adjust the volume, go to specific tracks, fast-forward or fast-rewind with the Jog Dial navigator. 1 Tap the JogDial icon at the top left of the screen, or hold the Jog Dial navigator down for a few seconds. The Jog function select screen appears.
Tap OK. The Jog Dial navigator icon at the top left of the screen changes to the icon you selected, and the Jog Dial navigator function for the Audio Player is switched to the one of your choice.
Playing audio files on your CLIÉ handheld Playing audio files with the supplied remote controller You can start playback even when your CLIÉ handheld is turned off by using the supplied remote controller. Volume adjustment button ./> button N/x button 1 After making sure that the write protect tab is not set to LOCK, insert the Memory Stick media into the Memory Stick slot. 2 3 Connect the headphones. Press N on the remote controller. Playback starts from the first song.
Press x. Press .. Press . repeatedly. Press >. Press > repeatedly. Press . and hold. Press > and hold. Press + or –. Locking the controls (Hold) To prevent the controls from being accidentally operated when you carry the player, use the HOLD function. Slide the HOLD switch of the remote controller to HOLD. None of the controls on the remote controller will operate.
Playing audio files on your CLIÉ handheld Protecting your CLIÉ handheld from accidental pressure on its controls Slide the HOLD switch of your CLIÉ handheld to HOLD. HOLD switch The screen display turns off even during an operation, and none of the controls on your CLIÉ handheld will operate. Note While the HOLD switch of your CLIÉ handheld is set to HOLD, you can only operate the controls of the remote controller.
To switch the album, do as follows. 1 Tap Menu , Tools, and then About Memory Stick. The album information of the ATRAC3 audio files appears. 2 Tap MP3. The playback album is switched to the MP3 custom album. The next time you start playback, MP3 format audio files stored in the MG Memory Stick media are played. 3 Tap OK. To return to the ATRAC3 custom album Tap ATRAC3 in step 2.
Changing the background design You can change your Audio Player’s background design by installing add-on sample files (Skin files). Installing skin files to your CLIÉ handheld You can install the skin files via your computer’s hard disk. Place your CLIÉ handheld on the cradle, and then install the Palm Desktop for CLIÉ software on your computer from the supplied CDROM. 1 Double-click the Palm Desktop for CLIÉ icon on the Windows desktop. The Palm Desktop for CLIÉ software starts. 2 Click Install.
You can uninstall the add-on skin files from your CLIÉ handheld using MS Gate. For details on MS Gate, see “Exchanging data via Memory Stick media” in the Operating Instructions manual. 1 MS Gate starts. The data in your CLIÉ handheld is listed. 2 Press the Jog Dial navigator to select Internal. You can also tap the arrow V in the upper right corner to select Internal from the drop-down list. 3 4 Tap to select the AudioPlayerSkin file. Tap DELETE. The delete File dialog box is displayed. 5 Tap OK.
Notes on Memory Stick media What is Memory Stick media? Memory Stick media is a new compact, portable and versatile Integrated Circuit recording medium with a data capacity that exceeds that of a floppy disk. The Memory Stick media is specially designed for exchanging and sharing digital data among Memory Stick media compatible products. Because it is removable, a Memory Stick media can also be used for external data storage.
What is “MagicGate”? To avoid damaging data, do not: • remove the Memory Stick media or unplug the AC power adaptor during reading or writing of data. • use the Memory Stick media in a location subject to static electricity or electric noise. TOC reading time depends on the number of songs When you start Audio Player, the application starts reading the TOC information including the song name, artist name, etc., of the Memory Stick media.
Notes on using RealJukebox for Sony Caution When you use an external CD-ROM drive (including docking-stations) While using RealJukebox for Sony software, do not connect/ remove the external CD-ROM drive. If you do, serious malfunction may occur. If you want to connect/remove the CDROM drive, turn off your computer, then connect/remove the drive. • Do not start both OpenMG Jukebox and RealJukebox for Sony concurrently.
Chapter 1 Playing audio files (Audio Player) 51
Notes on using OpenMG Jukebox 52
Chapter 1 Differences between the HotSync operation and the Check-In/Out procedure Playing audio files (Audio Player) The Check-In (transferring digital audio files to your computer)/Out (transferring digital audio files to your CLIÉ handheld) procedure differs from the HotSync operation in several ways.
Notes on using OpenMG Jukebox Transferring songs from your CLIÉ handheld to your computer (Check-In) You can return audio files recorded on your CLIÉ handheld to your computer’s hard drive (Check-In). You can return them only to the same computer from which the tracks were Checked-Out. 1 Start OpenMG Jukebox and place your CLIÉ handheld on the cradle. 2 On the home screen, rotate the JogDial navigator to select AudioPlayer and then press the JogDial navigator.
Click (Stop). Note Once the Check-In has started, do not disconnect the USB cable or Memory Stick until the Check-In is complete. Doing so may damage the data or cause a malfunction. If you want to Check-In all the audio files on your CLIÉ handheld, click (In All). All the songs in the MG Memory Stick in your CLIÉ handheld are CheckedIn.
Notes on using OpenMG Jukebox Notes on playing audio files For the latest information on these applications, see the Website of the portable audio customer support. (http://www.openmg.com) Installing OpenMG Jukebox software from the supplied CDROM Be sure to install the OpenMG Jukebox software before connecting the unit to your computer.
• Do not change to system suspend/system hibernation mode during the following modes: – recording songs from an audio CD – playing songs using OpenMG Jukebox – placing your CLIÉ handheld in the transfer mode on the cradle • If you replace the MG Memory Stick during system suspend/system hibernation mode, songs may be lost after the system resumes.
Notes on using OpenMG Jukebox Restrictions on copyright protection by OpenMG OpenMG Jukebox features OpenMG, a copyright protection technology developed by Sony to protect music copyrights. OpenMG uses a high-level cryptographic technology to protect music contents with computers. Users should be notified of the restrictions mentioned below. 1.This product can only be used with a computer on which the supplied OpenMG Jukebox software has been installed. 2.
Using Help files Chapter 1 The supplied software includes three types of Help files: • RealJukebox Help: Help files on how to use the RealJukebox software. • OpenMG Jukebox Help: Help files on how to use the OpenMG Jukebox software. Displaying Help files You can display the Help files either of the following ways: To display the RealJukebox Help • Click Start, Programs, Real, and then RealJukebox. • Start the RealJukebox software, and then select the Help file from the Help menu.
How to read the online manual Detailed information on the Audio Player application is provided with the online manual in the supplied CD-ROM. To view the online manual, the Adobe Acrobat Reader version 4.0 or higher must be installed on your computer. 1 Insert the supplied CD-ROM into your computer’s CDROM drive. The install screen appears automatically. 2 3 Click Manuals. Double-click AudioPlayer2.pdf. The online manual appears.
Audio Player menu items Chapter 1 The following items appear when you tap the MENU icon. This section explains the menu commands specific to Audio Player. For the Edit menu, see “Using the Edit menu” in the Operating Instructions manual. Tools menu Shows the information for the (MG) Memory Stick media inserted into your CLIÉ handheld and album information. MP3 audio files and ATRAC3 audio files in the (MG) Memory Stick media are separately managed as Album.
Audio Player menu items • Enable background play: If you want to continue to play audio files while you use other applications, tap to select the check box. If you want to start playback from the remote controller, tap to select the check box. Tap to unselect this check box if you want to delete Audio Player. • Reset PB mode by album change: If you want to reset the playback mode to the factory preset setting when you change the album or the Memory Stick media, tap to select the check box.
Chapter 2 Viewing image files (PictureGear Pocket) Chapter 2 This chapter explains how to view image files on your CLIÉ handheld.
What you can do with PictureGear Pocket PictureGear Pocket is a picture album application for your CLIÉ Handheld. Anytime anywhere... Using PictureGear Pocket, you can store still image files from various sources including those taken with a digital camera or those downloaded from the Internet to your CLIÉ handheld. You can look at your favorite image files anytime and anywhere.
Installing You do not have to install PictureGear Pocket on your CLIÉ handheld, as it is factory pre-installed. This section describes how to install the PhotoStand application. If you install PhotoStand, you can use the PhotoStand function (pages 78-79). Installing the PhotoStand application to your CLIÉ handheld Chapter 2 You can install PhotoStand via your computer’s hard disk.
Installing Installing the PictureGear 4.4Lite software to your computer You can convert the image files stored in your computer using PictureGear 4.4Lite. To view image files or movies with your CLIÉ handheld, use PictureGear Pocket or gMovie player. 1 Insert the Installation CD-ROM into the CD-ROM drive. The installation launcher window appears. 2 3 4 Click Install CLIÉ Utilities. Click Install CLIÉ Image Software. Click Install PictureGear Lite. The PictureGear 4.4Lite software installation starts.
Viewing image files stored in your CLIÉ handheld Transferring image files to your CLIÉ handheld 1 Start PictureGear 4.4Lite. See page 66 for details. 2 Select the image file you want to send. You can also select multiple images by holding down the Ctrl or Shift keys while clicking. 3 From the File menu, select Output services and then Install the image during the next HotSync. The User name dialog box appears. 4 Click the arrow V to the right of the text box, and then select a user name.
Viewing image files stored in your CLIÉ handheld To save an image file to a Memory Stick media You can also directly transfer image files to Memory Stick media. Select Output CLIÉ Handheld format file to Memory Stick in step 3 on page 67. To view image files stored in a Memory Stick media, see page 73.
Viewing image files with your CLIÉ handheld 1 On the home screen, rotate the Jog Dial navigator to select PG Pocket and then press the Jog Dial navigator. Or, tap the PG Pocket icon on the home screen. Chapter 2 2 Tap the arrow V on the top center of the screen to select Internal. 69 Viewing image files (PictureGear Pocket) PictureGear Pocket starts.
Viewing image files stored in your CLIÉ handheld 3 Rotate the Jog Dial navigator to display the desired image file, then press the Jog Dial navigator. Or, tap the desired image. The selected image appears. 4 When you want to hide icons displayed at the bottom of your CLIÉ handheld screen, tap (hide icons). When you want to display them again, tap the screen, or press the Jog Dial navigator or the BACK button. 5 When you want to show another image file, rotate the Jog Dial navigator.
Viewing detailed information for the image file Tap (detailed) while the image file is displayed. Detailed information for the image file appears. Chapter 2 1 2 Tap while the image file is displayed. Rotate the Jog Dial navigator to magnify the image file. When you press the Jog Dial navigator, the image file is automatically magnified on the screen. If you rotate the Jog Dial navigator counter-clockwise, the image is magnified. If you rotate the Jog Dial navigator clockwise, the image is reduced.
Viewing image files stored in your CLIÉ handheld Changing the image file list screen You can change the image file list screen to display items by name and date, or by thumbnail image. By name and date (List mode) By thumbnail image (Preview mode) To display the image file list by name and date (List mode) Tap . To display the image file list by thumbnail image (Preview mode) Tap 72 .
Viewing image files stored in Memory Stick media 1 On the home screen, rotate the Jog Dial navigator to select PG Pocket and then press the Jog Dial navigator. Or, tap the PG Pocket icon on the home screen. PictureGear Pocket starts. Insert the Memory Stick media into the Memory Stick slot. 3 Tap the arrow V on the top center of the screen to select MS.
Viewing image files stored in Memory Stick media 4 If you want to view DCF image files taken by digital still cameras etc., tap DCF. If you want to view image files converted by the PictureGear Pocket or PictureGear 4.4Lite software, tap PGP. Note You cannot move, copy or transfer DCF format image files using the MS Gate application. However, you can convert them into PGP format image files using PictureGear Pocket, and save them to your CLIÉ handheld.
Copying image files Saving image files stored on your CLIÉ handheld to a Memory Stick media (Export) 1 2 Display the image file that you want to save (page 69). Tap (Import/Export). 3 Tap OK. To cancel the operation Tap Cancel in step 3 above. Saving multiple image files to a Memory Stick media at once In the photo list screen, tap (Import/Export). The check boxes used for selecting the image files appear. 2 Tap the check boxes to select the image files you want to save. 3 Tap Export.
Copying image files Saving image files stored on a Memory Stick media to your CLIÉ handheld (Import) 1 2 Display the image file that you want to save (page 73). Tap (Import/Export). The Import/Export dialog box appears. • When you want to save a PGP format image file To change the category of the image files, tap the arrow V and select the desired category. If you want to delete the original image file stored in a Memory Stick media, tap to select Delete the original image.
Saving multiple DCF image files to your CLIÉ handheld at once 1 In the photo list screen, tap (Import/Export). The check boxes used for selecting the image files appear. Chapter 2 Tap the check boxes to select the image files you want to save. 3 Tap Import. The Import/Export dialog box appears. 4 Tap OK. The selected image files are converted to the PGP format and saved to the CLIÉ handheld. Depending on the image file, this may take a few seconds.
Displaying image files one after another (PhotoStand) You can display image files one after another when you place your CLIÉ handheld on the cradle (PhotoStand function). You can also use your CLIÉ handheld as a clock by displaying the current time using the PhotoStand application. Making a PhotoStand setting 1 In the photo list screen of PictureGear Pocket, tap (PhotoStand). The check boxes used for selecting the image files appear.
• Loop: If you want to repeat image files automatically from the start, tap to select this check box. • Autorun: If you want to start PictureGear Pocket when you insert the Memory Stick media into your CLIÉ handheld, tap to select this check box. This option appears only if you select the images stored on the Memory Stick media for the PhotoStand. 5 Tap Save. Chapter 2 The image files that you selected in step 2 and the settings you made in step 4 are saved with a PhotoStand title.
Viewing sample image files You can view sample image files installed on your computer. Install the Palm Desktop for CLIÉ software to your hard disk using the supplied CD-ROM and then place your CLIÉ handheld on the cradle. 1 Double-click the Palm Desktop for CLIÉ icon on the Windows desktop. The Palm Desktop for CLIÉ software starts. 2 Click Install. The Install Tool dialog box appears. 3 4 Select a user name from the user list. Click Add. Make sure that the Add-on folder is selected.
How to read the online manual Detailed information on the PictureGear Pocket application is provided in the online manual in the supplied CD-ROM. To view the online manual, the Adobe Acrobat Reader version 4.0 or higher must be installed on your computer. 1 Insert the supplied CD-ROM into your computer’s CDROM drive. The install screen appears automatically. Chapter 2 2 3 Click Manuals. Double-click PictureGear Pocket Manual.pdf. The online manual appears.
PictureGear Pocket menu items The following items appear when you tap the MENU icon. This section explains the menu commands specific to PictureGear Pocket. Photo list screen View menu List Changes the view of the photo list screen. PhotoStand Starts the Photostand application. Image menu Import/Export Shows the import/export screen. Tap the check boxes to select the image file(s) you want to import/ export. For details, see “Copying image files” on page 75. Remove Shows the Remove screen.
Options menu Preference (available only when you view image files stored in the Memory Stick media) Shows the Preference screen. Tap to select the default image format. About PictureGear Pocket Chapter 2 Shows the version information of PictureGear Pocket. Image file screen View menu Viewing image files (PictureGear Pocket) Back Returns to the Photo list screen. Details Shows detailed information for the image file. Zoom Magnifies the image file. For details, see “Magnifying image files” on page 71.
PictureGear Pocket menu items Image menu Import/Export Imports/exports the currently selected image file. For details, see “Copying image files” on page 75. Delete Deletes the currently selected image file. For details, refer to the online manual. Beam Beams the currently selected image file to another CLIÉ handheld. Options menu Preference Shows the Preference screen. About PictureGear Pocket Shows the version information of PictureGear Pocket.
Chapter 3 Playing a movie (gMovie player) This chapter explains how to play a movie on your CLIÉ handheld.
What you can do with the gMovie player software gMovie is an application which allows you to display or play back movie file created with Windows® applications such as PictureGear 4.4Lite, on your CLIÉ handheld. Playing movies on your CLIÉ handheld You can play a movie that has been converted to the proper format and then transferred from your computer, or stored in the Memory Stick media. You can enjoy your favorite movies anytime, anywhere.
Installing You do not have to install gMovie player on your CLIÉ handheld The gMovie player application is factory pre-installed. Install PictureGear 4.4Lite software to your computer Install PictureGear 4.4Lite software to your computer according to the instructions on page 66.
Playing movies with your CLIÉ handheld You can transfer movies shot by a digital still camera or downloaded from the Internet, etc., which are managed by the PictureGear 4.4Lite software on your computer. You will need to optimize movies on your CLIÉ handheld by the PictureGear 4.4Lite software before transferring. For details of operations or how to save the movies in the format which is supported by the PictureGear 4.4Lite, refer to the online Help of the PictureGear 4.4Lite.
To save a movie to the Memory Stick media If your computer has a Memory Stick reader, you can also directly transfer a movie to the Memory Stick media. Select “Output CLIÉ format file to Memory Stick” in step 3 on page 88.
Playing movies with your CLIÉ handheld Playing movies 1 On the home screen, rotate the Jog Dial navigator to select gMovie and then press the Jog Dial navigator. Or, tap the gMovie icon on the home screen. The gMovie player starts and the movie list screen appears. 2 Tap the movie you want to play. Playback starts. To stop playback Tap (Stop). To resume playback, tap (Play). To locate the starting point of the movie Tap 90 (Locate).
To adjust the volume Tap each line in (Volume) towards the right (increase) or to the left (decrease). To return to the movie list screen Tap (Return) at the upper-right corner of the screen. To play the next movie Tap (Next) at the upper-right corner of the screen. To play movies one after another (continuous playback) Using the remote controller Playing a movie (gMovie player) Go to next file Go to previous file Play Stop playback Adjust the volume Press >. Press .. Press B. Press x.
Playing sample movie files You can view sample movie files installed on your computer. Install the Palm Desktop for CLIÉ software to your hard disk using the supplied CD-ROM and then place your CLIÉ handheld on the cradle. 1 Double-click the Palm Desktop for CLIÉ icon on the Windows desktop. The Palm Desktop for CLIÉ software starts. 2 Click Install. The Install Tool dialog box appears. 3 4 Select a user name from the user list. Click Add. Make sure that the Add-on folder is selected.
How to read the online manual Detailed information on gMovie player software is provided in the online manual on the supplied CD-ROM. To view the online manual, the Adobe Acrobat Reader version 4.0 or higher must be installed on your computer. 1 Insert the supplied CD-ROM into your computer’s CDROM drive. The install screen appears automatically. 2 3 Click Manuals. Double-click gMovie Manual.pdf. The online manual appears.
gMovie software menu items The following items appear when you tap the MENU icon on your CLIÉ handheld screen. This section explains the menu commands specific to gMovie player. Media list screen Media menu About gMovie Shows version information of the gMovie application. Movie file screen Media menu Details Shows detailed information of the current media. Beam Media Transfers the data contained in the current media to another CLIÉ handheld via the IR port.
• Audio Channels: Both: When you are using both the left and right headphones, select this to enjoy both channels of the movie’s audio. Left: When you are using just the left headphone, select this to have just the left channel of the movie’s audio come from the left headphone. Right: When you are using just the right headphone, select this to have just the right channel of the movie’s audio come from the right headphone.
Chapter 4 Setting the Memory Stick automatic start function (MS Autorun) This chapter explains how to set the Memory Stick automatic start function on your CLIÉ handheld. When you want to start an application in the Memory Stick media from the home screen, refer to the Operating Instructions manual.
What you can do with the MS Autorun application Memory Stick Autorun (hereinafter referred to as MS Autorun) is an add-on application which allows your CLIÉ handheld to copy and start a specified application automatically when Memory Stick media is inserted into the CLIÉ handheld. Removing the Memory Stick media automatically deletes the application copy from the memory of the CLIÉ handheld. MS Autorun functions as a virtual memory to effectively utilize the memory of the CLIÉ handheld.
Notes You do not have to install MS Autorun on your CLIÉ handheld The MS Autorun application is factory pre-installed. Setting the Memory Stick automatic start function (MS Autorun) • It is not recommended to use MS Autorun with the Address Book, Date Book, To Do List, Memo Pad, Calculator or Mail applications. Problems may occur if the data of these applications do not reside on your CLIÉ handheld when you perform a HotSync operation.
Setting Auto-run for an application To automatically start an application stored in a Memory Stick media, perform the following procedure. This example is for when the PictureGear Pocket application is set to start automatically when a Memory Stick media containing photos is inserted to the CLIÉ handheld. 1 Install an application you want to start automatically (PictureGear Pocket) on the CLIÉ handheld.
When the home screen is displayed and you insert Memory Stick media into your CLIÉ handheld, the PictureGear Pocket application starts automatically. In this case, if you remove the Memory Stick media, the PictureGear Pocket quits automatically and the home screen appears. For further information, refer to the online manual for MS Autorun.
How to read the online manual Detailed information on MS Autorun software is provided in the online manual on the supplied CD-ROM. To view the online manual, the Adobe Acrobat Reader version 4.0 or higher must be installed on your computer. 1 Insert the supplied CD-ROM into your computer’s CDROM drive. The install screen appears automatically. 2 3 Click Manuals. Double-click MSAutorun Manual.pdf. The online manual appears.
Chapter 5 Copying the data to the Memory Stick media on your CLIÉ handheld (MS Import/Export) This chapter explains how to copy the data on your computer to the Memory Stick media on your CLIÉ handheld directly without performing HotSync operation.
What you can do with the MS Import/ Export applications Both Memory Stick (MS) Import and Memory Stick (MS) Export are applications designed to help you copy the data on your computer to the Memory Stick media on your CLIÉ handheld directly without performing a HotSync operation. When copying the data on your computer You have to use both the MS Import application for your CLIÉ handheld and the MS Export software for your computer at the same time.
Installing 1 Insert the installation CD-ROM into the CD-ROM drive of your computer. The setup program starts automatically. 2 3 Click Install CLIÉ Utilities. Click Install Memory Stick Export. The installation starts. Follow the instructions displayed on the screen. After the installation is completed, the installation screen reappears. 4 Click Exit. The installation of MS Export software ends.
Installing CLIÉ applications using MS Import/Export You can install applications for your CLIÉ handheld into the Memory Stick media without performing HotSync operation if you use MS Import/Export. 1 Connect the cradle to a computer in which you have installed the MS Export software. 2 3 4 Insert the Memory Stick media into your CLIÉ handheld. Place your CLIÉ handheld on the cradle. On the home screen, rotate the Jog Dial navigator to select MS Import and then press the Jog Dial navigator.
Start MS Export again, then click the Memory Stick Drive tab of the MS Export software. Note You cannot copy applications by dragging them to the Memory Stick Drive window of the MS Export software.
Using your CLIÉ handheld as a removable disk 1 Connect the cradle to a computer in which you have installed the MS Export software. 2 3 4 Insert the Memory Stick media into your CLIÉ handheld. Place your CLIÉ handheld on the cradle. On the home screen, rotate the Jog Dial navigator to select MS Import and then press the Jog Dial navigator. MS Import starts. Or, tap the MS Import icon on the home screen. 5 Operate the desired file or data using Windows Explorer, etc.
How to read the online manual 1 Insert the supplied CD-ROM into your computer’s CDROM drive. The install screen appears automatically. 2 3 Click Manuals. Double-click MSImport.pdf. The online manual appears. If the Acrobat Reader software is not installed/updated 1 Insert the supplied CD-ROM into your computer’s CDROM drive. The install screen appears automatically. 2 3 Click Exit. 4 Right-click the CD-ROM drive icon, then click Open from the shortcut menu. 5 6 7 Double-click the PC folder.
Chapter 6 Troubleshooting This chapter explains how to troubleshoot your problems on using your CLIÉ handheld.
Problems for Audio Player On playback The number of the audio files do not appear when I start the Audio Player. , If the Memory Stick media you inserted has many audio files recorded, you may not be able to operate the CLIÉ handheld for a few seconds; this is not a malfunction. There is no sound. , Adjust the volume. The volume does not increase. , Cancel the AVLS function. (page 36) Sound skips. , Playback sound may be distorted when you tap REVERSE or SHUFFLE during playback; this is not a malfunction.
The playback suddenly stopped. , The battery is exhausted. You need to recharge it. , The connector of the Memory Stick media may be dirty. Remove and insert it several times. Cannot play audio files which have playback limitations. , You cannot play such files beyond the limited period. The buttons on the remote controller do not operate. , Make sure the HOLD switch on the remote controller is not set to HOLD.
Problems for Audio Player Only a few songs can be Checked-Out (The recordable time is short). , The free memory space of the Memory Stick media in your CLIÉ handheld may be smaller than the size of the audio files you want to Check-Out. Check-In unnecessary songs to make more memory space. Audio files in the Memory Stick media do not appear on the computer’s screen despite being connected. , Insert the Memory Stick media and then reconnect the CLIÉ handheld to your computer.
Cannot operate the CLIÉ handheld for a few seconds after inserting the Memory Stick media. , When you insert the Memory Stick media which has many audio files recorded on it, you may not be able to operate your CLIÉ handheld for a few seconds; this is not a malfunction. Wait until the title of the audio file appears or the Memory Stick indicator stops flashing.
Index A ATRAC3 format audio files G gMovie player To enjoy ATRAC3 format audio files .................................... 10 What you can do with the gMovie player software ............................ 86 Playing movies with your CLIÉ handheld ...................................... 88 Transferring movies to your CLIÉ handheld ...................................... 88 Playing movies ............................. 90 Playing sample movie files ........... 92 Menu items ..................................
Saving image files stored on a Memory Stick media to your CLIÉ handheld (Import) ........................ 76 Saving image files stored on your CLIÉ handheld to a Memory Stick media (Export) .............................. 75 Setting the Memory Stick automatic start function (MS Autorun) ............ 97 OpenMG Jukebox Differences between the HotSync operation and the Check-In/Out procedure ..................................... 53 Installing OpenMG Jukebox software .......................................
Playing audio files See “Audio Player” Playing movie files See “gMovie player” R Real Jukebox Installing RealJukebox for Sony software ....................................... 12 Notes on using RealJukebox for Sony ....................................... 50 T Transfer mode .................................. 28 Troubleshooting ............................. 111 V Viewing image files See “PictureGear Pocket” W WAV format audio files Importing WAV audio files into your computer .............................
For the latest support information, check our official Sony CLIÉ Web site http://www.sony.
