Specifications

Adjustments and Settings from Menus
225
Chapter 6 Menu Displays and Detailed Settings
The screen changes to the Wi-Fi SETTING
page.
3 Specify the connection destination (see
the next section for how to specify it).
To specify a connection destination by
automatic detection
1 On the Wi-Fi SETTING page, select
“SCAN NETWORKS” and then press
the MENU knob.
The screen changes to the NETWORKS
page, and automatic detection of the
connection destination starts.
Several minutes may be required for network
detection.
This page displays the following network
items.
2 Select the desired access point or
computer from the detected items, and
then press the MENU knob.
You return to the Wi-Fi SETTING page.
Check the various setting items.
To return to the Wi-Fi SETTING page
If you do not want to specify a connection
destination on this page, or if no connection
destination was detected, select “ESC” and
then press the MENU knob to return to the
Wi-Fi SETTING page.
To specify a connection destination
manually
Specify the following items on the Wi-Fi
SETTING page.
Note
Some limitations apply to combinations of the
“NETWORK TYPE”, “AUTH”, and “ENCRYPTION”
settings.
To enter an SSID
Select SSID, press the MENU knob to display the
Wi-Fi>SSID page, and then press the MENU
knob again.
When you press the MENU knob once more, an
x appears over the first character in the input
string, and the unit enters character input mode.
Item Description
SSID Network name
TYPE Network connection mode
INFRA: Infrastructure mode
ADHOC: Ad hoc mode
LVL Signal strength
0 (minimum) to 4 (maximum)
MODE IEEE 802.11 standard
ESC Wi-Fi SETTING
SCAN NETWORKS: EXEC
SSID: 00:11:22:33:44:55
NETWORK TYPE : ADHOC
CH : 1
AUTH : OPEN
ENCRYPTION : DISABLE
SET
ESC P00 NETWORKS SCAN
01.SSID:
TYPE: ADHOC LVL : 4
MODE: 802.11b/g/n
02.SSID:
TYPE: INFRA LVL : 3
MODE: 802.11b/g/n
Item name Setting
SSID (network name) Up to 32 alphanumeric
characters or symbols
NETWORK TYPE
(connection mode)
INFRA: Infrastructure
mode
ADHOC: Ad hoc mode
CH (wireless channel) 1 to 11 (can be specified
only in ad hoc mode)
AUTH (network
authentication)
OPEN: Open system
authentication
SHARED: Shared key
authentication
WPA: WPA (Wi-Fi
Protected Access)
authentication
WPA2: WPA2 (Wi-Fi
Protected Access 2)
authentication
ENCRYPTION (data
encryption)
DISABLE: Disable
WEP: WEP (Wired
Equivalent Privacy)
method
TKIP: TKIP (Temporal
Key Integrity Protocol)
method
AES: AES (Advanced
Encryption Standard)
method