Specifications

Menu List
195
Chapter 6 Menu Displays and Detailed Settings
22/23 NETWORK 1 NETWORK SETUP EXEC Displays the
NETWORK
SETTING page,
so that you can
make network
settings.
DHCP Display only Enables or
disables
automatic
acquisition of an
IP address from a
DHCP server
IP ADDRESS Display only IP address
SUBNET MASK Display only Subnet mask
DEF.GATEWAY Display only Default gateway
LINK SPEED Display only Link speed
DUPLEX Display only Communications
method
DNS1 Display only DNS server 1
UPnP Display only Enable or disable
UPnP.
NETWORK
SETTING
DHCP ENABLE/
DISABLE
Selects whether to enable automatic
acquisition of the IP address from a DHCP
server.
Notes
• IP address, subnet mask, default gateway, and
DNS server 1 and 2 cannot be set when DHCP
is set to “ENABLE”.
• To check automatically acquired settings, close
the menu and open it again.
IP ADDRESS xxx.xxx.xxx.xxx
192.168.1.10
Set the IP address of this unit.
SUBNET MASK xxx.xxx.xxx.xxx
255.255.255.0
Sets the subnet mask.
DEF.GATEWAY xxx.xxx.xxx.xxx
0.0.0.0
Set the address of the default gateway.
LINK SPEED AUTO/10Mbps/
100Mbps
Sets the communications speed.
DUPLEX AUTO/FULL/
HALF
Sets the duplex mode.
DNS1 xxx.xxx.xxx.xxx
0.0.0.0
Set the address of DNS server 1.
DNS2 xxx.xxx.xxx.xxx
0.0.0.0
Set the address of DNS server 2.
UPnP DISABLE/
ENABL
Select whether to enable the UPnP (universal
plug and play) function.
DISABLE: Disable the UPnP function.
ENABLE: Enable the UPnP function.
No. Page Item Settings Description