Specifications

Menu List
193
Chapter 6 Menu Displays and Detailed Settings
17/18 AUTO IRIS 2 IRIS WINDOW 1/2/3/4/5/6/VAR Selects the auto iris detection window.
VAR: variable
IRIS WINDOW
IND
OFF/ON Turns on and off the function which displays a
frame marker for the auto iris detection
window.
IRIS LEVEL (–99 to 99) Adjusts the level of the auto iris target value.
IRIS APL RATIO (–99 to 99) Adjusts the mix ratio of auto iris detection
peak value and average value.
IRIS VAR WIDTH 20 to 240 to 479 Adjusts the width of detection frame when the
auto iris detection window is set to VAR.
IRIS VAR HEIGHT 20 to 135 to 269 Adjusts the height of detection frame when
the auto iris detection window is set to VAR.
IRIS VAR H POS –460 to 0 to 459 Adjusts the horizontal position of detection
frame when the auto iris detection window is
set to VAR.
IRIS VAR V POS –250 to 0 to 249 Adjusts the vertical position of detection
frame when the auto iris detection window is
set to VAR.
IRIS SPEED (–99 to 99) Adjusts the auto iris speed.
CLIP HIGH LIGHT OFF/ON Turns on and off the function which, during
auto iris adjustment, ignores very bright areas
by dulling the reaction to high luminescence.
18/19 GENLOCK GENLOCK OFF/ON Turns genlock on and off.
GL HD H PHASE (–99 to 99) Sets the HD output H phase for genlock
operation.
GL SD H PHASE
(Does not appear
when the FORMAT
page item SYSTEM
LINE is set to 1080
and the SYSTEM
FREQUENCY item
is set to 23.9P)
(–99 to 99) Sets the SD output H phase for genlock
operation.
REFERENCE INTERNAL/
GENLOCK/
SDI IN
Displays the type of reference signal used by
this unit.
19/20 ND COMP ND OFFSET
ADJUST
OFF/ON Turns on and off the mode which sets ND
(neutral density) filter color compensation
values.
CLEAR ND
OFFSET
EXEC Clear ND filter color compensation values.
No. Page Item Settings Description