Specifications

Menu List
187
Chapter 6 Menu Displays and Detailed Settings
10/10 TIMECODE TC OUT AUTO/GENE Selects the timecode signal output.
AUTO: Outputs the timecode generator
output during recording and outputs the
timecode reader output during playback.
GENE: Outputs the timecode generator
output during recording and playback.
DF/NDF
(When SYSTEM
FREQUENCY is set
to “59.94i”,
“29.97P”, or
“59.94P”)
DF/NDF Sets DF or NDF mode.
DF: Drop frame mode
NDF: Non-drop frame mode
EXT-LK DF/NDF
(When SYSTEM
FREQUENCY is set
to “59.94i”,
“29.97P”, or
“59.94P”)
INT/EXT Selects either internal setting or external
setting for DF/NDF.
INT: Internal
EXT: External
EXT-LK UBIT INT/EXT Sets whether the LTC UBIT setup value locks
to an INT or an EXT source when the
timecode is locked to an external source.
INT: Internal lock
EXT: External lock
LTC U BI T FIX/TIME Sets the data to be recorded in U-BIT of LTC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
VITC UBIT (SD)
(When the CBKZ-
MD01 is installed)
FIX/TIME Sets the data to be recorded in U-BIT of
VITC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
WAT C H AU T O
ADJ
OFF/ON Matches the time of the internal clock with the
time data of the user bits of an external
timecode. Turns the automatic time correction
function of the internal clock on or off.
UBIT GROUP ID 000/101 Selects the U-BIT GROUP ID.
VITC INS LINE 1
(When the CBKZ-
MD01 is installed)
NTSC: 12H to
16H to 19H
PAL: 9 H to 19H
to 22H
Selects the line into which VITC is to be
inserted.
VITC INS LINE 2
(When the CBKZ-
MD01 is installed)
NTSC: 12H to
18H to 19H
PAL: 9 H to 21H
to 22H
No. Page Item Settings Description