Specifications

Advanced Operations for Shooting
102
Chapter 4 Shooting
3 Select NAMING FORM and then press
the MENU knob.
4 Turn the MENU knob to display
“FREE” and then press the MENU
knob.
You can now enter a user-defined name.
5 Turn the MENU knob to select “AUTO
NAMING” and then press the MENU
knob.
6 Turn the MENU knob to display
“TITLE” and then press the MENU
knob.
The same name will now be given to newly
recorded clips.
Notes
• An FTP client software that supports UTF-8 is
required to use Unicode characters other than ASCII
characters. Command prompt FTP commands do not
support UTF-8.
• When the first letter of the title setting on the CLIP
AUTO TITLING menu is a space or period (.), the clip
name is the title string minus the first letter.
To use clip names and clip list names by FAM
and FTP
Carry out steps 2 to 4 of “To assign clip names on
this unit” (page 101).
It is now possible to write, transfer, and rename
clips and clip lists with user-defined names over
file access mode (FAM) connections (see page
245) and FTP connections (see page 249).
To check clip names
Press the THUMBNAIL button to display the
thumbnail screen, and select the clip whose name
you want to check.
The name of the selected clip appears in the upper
left of the screen.
See “Clip thumbnail screen” (page 113) for more
information.
Note
The item at the upper left of the screen is displayed
according to the following order of priority.
Title > user-defined clip name > standard format clip
name
Therefore, the display of this item changes as follows,
depending on whether or not there is a title.
• When a title has been set as a clip name on this unit,
the title is displayed for clips recorded on this unit.
• The user-defined name or standard format name is
displayed for clips without a title.
To check clip information (name, title,
etc.)
For details, see “Checking clip properties”
(page 127).
Planning metadata is a file that contains metadata
about the clips to be shot and recorded.
To use planning metadata, you need to load a
planning metadata file into the unit’s memory
before starting to shoot.
NAMING FORM: FREE
AUTO NAMING: C****
028 FILE NAMING TOP
Using planning metadata
Fuji.MXF
Sakura.SMI
User-defined clip names can be used by FAM
and FTP
User-defined clip list names can be used by FAM
and FTP