User Guide

Bluetooth

Module UGPZ specification rev 1.1.8 March 28 /2003

ALPS PROPRIETARY INFORMATION CONFIDENTIAL REQUESTED

page4

4.2.4 Requirements to end product

The following provisions for end product will be required on the Canada regulation.

(1) Antenna

ALPS wishes that our customer use the UGPZ module without any modifications including antenna.

If customer use a unique antenna, the I.C certification is required for the end product.

(2) Markings

To satisfy Industry Canada exterior labeling requirements, the following text must be placed on the

exterior of the end product.

1) UGPZ1

2) UGPZ2

3) UGPZ3

Any similar wording that expresses the same meaning may be used.

4.3 Europe

The UGPZ module with CE marking will assist our customer into advance.

The end product containing UGPZ module with CE marking does not require further involvement of R&TTE

directive Notified Body, where the end product installs UGPZ module with no modification of the antenna in

conformance with ALPS’s installation instructions.

In all other cases, or if our customer of the end product is in doubt then the end product integrating the UGPZ

module must be assessed against Article 3.2 of the R&TTE Directive.

Since ALPS UGPZ modules are only intended to use for the end product, our customer shall take an action

to submit a “Notification” to each country of EU.

In the case where a Notified Body/Bodies has/have assessed the end product, this will be the Notified Body

number(s) given on the notification to the Spectrum Management Agencies.

In the case where a Notified Body has not assessed the end product, the Notification can be made to

Spectrum Management Agencies using the Notified Body number(s) on the UGPZ module.

Please note that the notification shall be given no less than four weeks in advance of the start of placing on

the market

Note: The our customer for the end product containing UGPZ module without CE marking shall be required

further application to R&TTE directive.

Contains Transmitter Module IC: 1788F-UGPZ1

Contains Transmitter Module IC: 1788F-UGPZ2

Contains Transmitter Module IC: 1788F-UGPZ3