© 2006 Sony Corporation Printed in Malaysia 2-887-746-12 (1) Quick Start Guide NW-S603 / S605 / S703F / S705F / S706F
Table of Contents Introduction..................................................................6 Getting Started.............................................................8 Owner’s Record The model and serial numbers are located on the back of the player. Record them in the space provided below. Refer to these numbers in the spaces whenever you call upon your Sony dealer regarding this product. Model No. __________________________ Serial No.
For Customers in Canada (NW-S603/S605 only) On Copyrights This Class B digital apparatus complies with Canadian ICES-003. SonicStage and the SonicStage logo are trademarks or registered trademarks of Sony Corporation. OpenMG, ATRAC, ATRAC3, ATRAC3plus, ATRAC Advanced Lossless and their logos are trademarks of Sony Corporation. “WALKMAN” and “WALKMAN” logo are registered trademarks of Sony Corporation.
Introduction Thank you for purchasing the NW-S603/S605/S703F/S705F/S706F*. To begin using the player, first import music songs into your computer using the SonicStage software, and then transfer them to the player. After transferring the music songs to the player, you can enjoy them wherever you go. Be sure to install the “SonicStage” software from the supplied CD-ROM in your computer.
Getting Started Supplied Items Check the following items. Headphones (1) Headphone extension cord (1) Earbuds (Size S, L) (1) USB cable (1) Attachment (1) Use when connecting the player to the optional cradle (BCR-NWU3)*1, etc. CD-ROM*2 (1) - SonicStage software - Operation Guide (PDF file) Quick Start Guide (this manual) (1) *1 Available soon. Depending on the country/region in which you have purchased the player, some optional accessories may not be available.
Getting Started (continued) – CD-ROM drive (supporting Digital Music CD playback capabilities using WDM) To create original CDs or to back up audio CDs, a CD-R/RW drive is required. – Sound board – USB port (Hi-Speed USB is recommended) Internet Explorer 5.5 or later needs to be installed. Internet connection is required to use the CD Data Base (CDDB) or Electronic Music Distribution (EMD) or to restore the backup data with SonicStage.
Importing Music Import audio data to your computer using the SonicStage. The methods of importing songs of CD are described here. For details, refer to SonicStage Help 1 2 Double-click icon on the desktop. SonicStage starts up. Insert the audio CD that you want to import to hard drive of your computer. You can obtain CD information (song name or artist name, etc.) while connected to the Internet. 3 Place the pointer over [Music Source] at the top of the screen and click [Import a CD].
Transferring Music For details, refer to SonicStage Help Connect the player to your computer and transfer the audio data to the player. USB cable (supplied) 1 2 3 4 5 Double-click the icon on the desktop. SonicStage starts up. Connect the player to your computer with the supplied USB cable. Place the pointer over [Transfer] and select [ATRAC Audio Device] from the transfer destination list. Select an audio file(s) or album you want to transfer. Click to start transferring.
Playing Music Basic Operation – Parts and Controls 4 3 2 1 5 6 Hint There is no power button on the player. When you stop song playback or FM reception (NW-S703F/S705F/S706F only) by pressing the button, after about a few seconds, the display goes off automatically and the player enters Sleep status. The player consumes very little battery power.
Playing Music (continued) Display qs qd qf qk ql Headphones qg R RB HOLD switch You can protect the player against accidental operation by using the HOLD switch when carrying it. By sliding the HOLD switch to the HOLD position, all operation buttons are disabled. If you press buttons or rotate the shuttle switch while the HOLD function is activated, “HOLD” appears in the display. If you slide the HOLD switch to the opposite position, the HOLD function is released.
Playing Music (continued) Play Modes and Settings The HOME screen appears when you press and hold the DISPLAY/HOME button of the player. The HOME screen is the starting point to play audio, search for songs, and change settings. HOME Screen*1 *1 5 of the 10 icons appear in the display with the current selection in the centre. The current icon changes depending on the function you use. By rotating the shuttle switch, you can select an icon and press the button to confirm.
Listening to FM Radio (NW-S703F/S705F/S706F only) Shuttle switch Normal (preset tuning) to button FOLDER 1 2 FOLDER (manual tuning) to Press and hold the DISPLAY/HOME button until the HOME screen appears. Rotate the shuttle switch to select button to confirm. The FM tuner screen appears. P20 FOLDER (FM) and press the 90.00 MHz S T A N D B Y SCAN H MONO Preset number DISPLAY/HOME button 3 Frequency Slide the shuttle switch to the FOLDER (manual tuning) position.
FAQ Q Which operating systems can be used with the player? A IBM PC/AT or compatible computer preinstalled with one of the following Windows operating systems: Windows 2000 Professional (Service Pack 3 or later)/Windows XP Home Edition/ Windows XP Professional/ Windows XP Media Center Edition/Windows XP Media Center Edition 2004/Windows XP Media Center Edition 2005 Not supported by operating systems other than above. Q An error message appears on the computer when installing.
Do not use headphones while driving and cycling, etc. As headphones reduce outside sounds, they may cause a traffic accident. Also, avoid listening with your headphones in situations where hearing must not be impaired, for example, a railroad crossing, a construction site, etc.
