User Guide

42
Selecting the sound quality
See the illustrations in the Japanese text
(page 20).
When listening with the headphones,
you can select the sound quality.
Emphasizing the bass (BASS
BOOST feature)
The BASS BOOST feature intensifies
low frequency sound for richer bass
reproduction.
1 Press FUNCTION.
2 Press MODE.
Each time you press MODE, the
setting changes as follows:
"OFF" n "BASS 1" (slight
emphasis of the bass) n "BASS 2"
(strong emphasis of the bass)
3 Press FUNCTION to end selection.
To select with the remote control
Press BB.
Each time you press BB, the selection
changes as follows:
"OFF" n "BASS 1" n "BASS 2".
Protecting your hearing (AVLS
function)
The AVLS (Automatic Volume Limiter
System) function allows you to limit
the maximum volume of the recorder
to protect your ears.
Slide AVLS on the remote control to
ON.
The volume is kept below the level
“23”, even if you attempt to turn the
volume up higher.
zPlayback –
Advanced operations
Listening with a stereo
system
See the illustration in the Japanese text
(page 18).
1 Connect the LINE OUT jack of the
recorder to the LINE IN jack of
your stereo system with the line
cable (supplied).
2 Insert the tape with the side you
want to listen to facing cassette
holder.
3 Slide DIR MODE to select playing
one side or both sides of the tape.
One side, set to A.
Both sides continuously*, set to
a.
* The recorder plays both sides three
times continuously and then
automatically stops.
4 Press “” to start playing.
To listen to a tape in a car
Use the car battery cord DCC-E215XL
(not supplied) and the car connecting
pack CPA-8 (not supplied). Connect the
DC IN 1.5V jack of the recorder to the
cigarette lighter socket of the car with the
car battery cord. And connect the LINE
OUT jack of the recorder to the cassette
car stereo with the car connecting pack.
Press
p
“” while
playing
P while playing
FF while in stop
mode
REW while in
stop mode
To
Stop playing
Play the opposite
side of a tape
Suspend playback
Fast-forward
Rewind