User Guide

41
Displays while recording
See the illustrations in the Japanese
text (page 17).
Each time you pres MODE while
recording, while in the standby mode,
or right after the recorder has stopped
recording, the display changes as
follows:
Tape counter (counted length
of the tape, not elapsed time)
v
Remaining time
v
Year, month, and date
v
Hour, minute, and second
(The clock operates in 24-hour
system.)
To reset the tape counter
Press COUNTER RESET. The tape
counter indicates "0H00M00S".
When "REMAIN" flashes in the
display
The remaining time of the tape is less
than about 4 minutes.
1 When the recorder is recording or
in recording standby mode, press
FUNCTION.
When the recorder is in other
modes, while pressing the red
button on REC, press FUNCTION.
2 Press MODE repeatedly until
“SPEECH” or “MUSIC” appears in
the display.
Each time you press MODE, the
display changes as follows:
“SPEECH” n “MUSIC” n
“MANUAL”
To record conversation, etc.:set to
SPEECH.
To record music: set to MUSIC
3 Press FUNCTION.
Recording level will be adjusted
automatically.
Adjusting the recording level
manually (Manual recording)
See the illustrations in the Japanese
text (page 16).
1 When the recorder is recording or
in recording standby mode, press
FUNCTION.
When the recorder is in other
modes, while pressing the red
button on REC, press FUNCTION.
2 Press MODE repeatedly to until
“MANUAL” appears in the
display.
3 Press FUNCTION.
The recording level control is
switched to manual control.
4 While pressing the red button,
press + or – to adjust the level.
As the digits in the display
increase, the level increases
(minimum: 0, maximum: 30).
Observe the display and adjust the
level so that the top bar lights up
once in a while.
$