Specifications

29
Connecting a non-Sony external recording device
The NEX-FS700R supports Rec Control signal for both SDI and HDMI.
This allows recording onto an external device synchronized with in-camera recording and
the time code in Rec Run or Free Run modes. The time code (TC) can also be superposed
onto HDMI signal output.
SDI/HDMI signal is output as uncompressed digital HD/SD signal during recording. This
enables video recording to an external device at maximum quality using an SDI/HDMI
cable.
By adding time code (TC) to the HDMI signal, it is effectively the equivalent of SDI signal.
To add time code to the HDMI signal go to:
[
MENU
] [
REC/OUTPUT SET
] [
VIDEO OUTPUT
] [
HDMI TC OUTPUT
]
Then use the menu system to switch on
[
SDI/HDMI REC CONTROL
]
.
On an external recorder such as the
ATOMOS NINJA2
, go to Time Code settings and
select
[
Sony
]
as the camera trigger to synchronize Rec/Stop on the NEX-FS700R and
the recorder.
For other recorders, contact the manufacturer directly.
• Recorders that support SDI synchronized recording
SOUND DEVICE PIX240,
ATOMOS SAMURAI / SAMURAI BLADE
• Recorders that support HDMI synchronized recording
ATOMOS NINJA2, Ver. 4.12 or later
The SDI/HDMI Rec Control time code supplies high-resolution output for an external recording device.
SOUND DEVICE PIX240
ATOMOS SAMURAI
ATOMOS NINJA2