Specifications

The following transition settings are available under MENU
[
CAMERA SET
] [
FOCUS TRANSITION
]
:
The focus transition time can be set in the range 3.5 – 90 seconds.
The focus transition can be delayed after pressing button 5 or 6 by 5, 10 or 20 seconds.
Focus transition starts when recording commences (choice of Focus A and Focus B).
[
Transition time
]
:
[
Start timer
]
:
[
Rec Link
]
:
Button functions
Cycles through the four modes: STORE, CHECK,
EXEC and OFF
In
[
STORE
]
mode: stores the focus point
In
[
CHECK
]
or
[
EXEC
]
mode: initiates the focus
transition
17
How to set/operate
■
Register buttons
1. MENU
[
OTHERS
] [
ASSIGN BUTTON
] [
FOCUS
TRANSITION
]
ON
2. When
[
Focus Transition
]
is
[
on
]
, buttons 4, 5 and 6 are
allocated to the
[
Focus Transition
]
function. Press button 4
to cycle through the four modes: STORE, CHECK, EXEC and
OFF.
■
Store focus points
3. Press button 4 to display the
[
STORE
]
screen, disengage Auto
Focus, shift the focus manually to point A, then press button 5.
4. Now do the same at point B and press button 6.
* The icon flashes during this procedure and operation is
disabled.
5.Press button 4 again to switch to
[
CHECK
]
mode.
Check the focus at point A with button 5, and at point B with
button 6.
* The stored focus points A and B will be automatically
deleted in the event of any of the following:
• The camera is turned
[
off
]
• The lens is removed
• Optical zoom is used
■
How to use: focus transition from A to B
6.
From the
[
CHECK
]
screen, press button 5 to focus on point A.
Press button 4 again to switch to
[
EXEC
]
mode.
Start recording, then press button 6 to initiate a smooth
focus transition to point B.
■
How to use: focus transition from current position to point
A (or point B)
From the
[
CHECK
]
screen, start recording with the focus set
to the current position, then press button 5 to initiate a smooth
focus transition to point A, or button 6 to transition to point B.
* In
[
EXEC
]
mode, press button 5 again to transition back to
point A.