Operating Instructions

masterpage:Right
filename[G:\_Upload\3073074111\307307411MVCFD100UC\02GB-
MVCFD100UC\06adv.fm]
B
BB B Various recording
65
model name1[MVC-FD100/200]
[3-073-074-11(1)]
Using the PROGRAM
AE function
To cancel PROGRAM AE
Press PROGRAM AE repeatedly until
the indicator on the LCD screen goes
out.
Notes
• You can focus only on distant subjects in
Landscape mode.
• In Panfocus mode, the zoom position is set
to the W side and focus is fixed.
• When you record in Twilight plus mode,
we recommend that you use a tripod to
prevent shaking.
• Set the forced flash when you use the
flashinthefollowingmodes:
– Twilight mode
– Twilight plus mode
–
Landscape mode
• You cannot use the PROGRAM AE
function when the moving or still image of
TEXT mode is recorded.
• The ISO film speed is set to AUTO when a
PROGRAM AE function other than the
spot light-metering mode is set.
1
Set the PLAY/STILL/MOVIE
selector to STILL.
2
Press PROGRAM AE
repeatedly to select the
desired PROGRAM AE mode.
Twilight mode
Suppresses the blurring of colors
of a bright subject in a dark place
so that you can record the subject
without losing the dark atmosphere
of the surroundings.
Twilight plus mode
Increases the effectiveness of the
twilight mode function.
Landscape mode
Focuses only on a distant subject to
record landscapes, etc.
Panfocus mode
Changes the focus quickly and
simply from a close subject to a
distant subject.
1
2
Spot light-metering mode
Select this mode when there is
backlight or when there is strong
contrast between the subject and
the background, etc. Position the
point you want to record at the spot
light-metering cross hair.
LCD screen
Spot light-metering
cross hair
01cov.book Page 65 Thursday, November 29, 2001 1:20 PM