Operating Instructions
Table Of Contents
- Table of contents
- Introduction
- Getting started
- Basic operations
- Advanced operations
- How to use the PLAY/STILL/MOVIE selector
- How to use the control button
- How to change the menu settings
- Setting the image size (IMAGE SIZE)
- Creating Clip Motion Files
- Recording still images for e-mail (E-MAIL)
- Recording text documents (TEXT)
- Recording still images as uncompressed files (TIFF)
- Recording images in macro
- Setting the distance to the subject
- Using the PROGRAM AE function
- Adjusting the exposure (EXPOSURE)
- Adjusting the white balance (WHITE BALANCE)
- Recording the date and time on the still image (DATE/TIME)
- Enjoying picture effects (PICTURE EFFECT)
- Playing back six images at once (INDEX)
- Enlarging a part of the still image (Zoom and trimming)
- Playing back the still images in order (SLIDE SHOW)
- Viewing images on a TV screen
- Preventing accidental erasure (PROTECT)
- Deleting images (DELETE)
- Changing the recorded still image size (RESIZE)
- Copying images (COPY)
- Copying all the information on your floppy disk (DISK COPY)
- Selecting still images to print (PRINT MARK)
- Format
- Using the camera as an external drive of a computer
- Additional information
34
3
If there is a device indicated with a question mark, delete it.
1 Click “ Sony DSC” or “ Sony Handycam”.
2 Click “Remove.” The “Confirm Device Removal” screen appears.
3 Click the “OK” button.
4
Turn off your camera and disconnect the dedicated USB cable from
the camera and computer.
5
Install the USB driver provided on the supplied CD-ROM.
See “Step 1 Installing the USB driver to the computer (page 29).”
Viewing images on Macintosh
OS: Mac OS 8.5.1/8.6/9.0/9.1/9.2, Mac OS X(v10.0/v10.1)
The above OS must be installed at the factory.
However, note that the upgrade to Mac OS 9.0/9.1 should be used for the
following models.
— iMac with the Mac OS 8.6 factory pre-installed and a slot loading type
CD-ROM drive
— iBook or Power Mac G4 with the Mac OS 8.6 factory pre-installed
Mac OS X(v10.0/v10.1) users can use a USB connection only when a
“Memory Stick” is used.
Display: Resolution of 800
×600 dots or higher, 32 000-color mode or higher
The USB connector must be provided as standard.
QuickTime 3.0 or newer must be installed to play back moving pictures.
Notes
• If you connect two or more devices that use USB to a single computer or use a hub, operation is
not guaranteed.
• Some USB devices may not operate if they are connected to the computer at the same time as
your camera.
• Operations are not guaranteed for all the recommended computer environments mentioned
above.
Step 1
Installing the USB driver to the computer (page 35)
Perform this step only when you view the images on your computer for
the first time.
Step 2
Connecting your camera to your computer using the USB cable
(page 36)
Step 3
Viewing images on Macintosh (page 36)
Recommended Computer environment
General procedure for viewing images