User Guide

4
GB
List of Accessories
When you unpack the carton, make sure that it contains all the accessories listed below.
If anything is missing or damaged, contact your retailer.
• MSFD-20U • Driver Software CD-ROM
• User’s Guide
• Setup Guide
• Warranty Card
Before you use the drive for the first time, you must install the driver software
on your computer. Before connecting the drive to your computer for the first time,
make sure that you perform the procedures outlined in the Setup Guide.
❏ Floppy disk drive with a 2× read/
write speed.
❏ Comes equipped with a “Memory
Stick” slot.
❏ The drive is powered by your
computer’s USB connector, so there
is no need to connect it to an external
power source.
❏ Has a compact, lightweight design
for portability.
Introduction
The MSFD-20U (hereafter referred to as the “drive”) has the following features:
System Requirements
The drive can be used with a computer with the following specifications:
❏ CPU: Pentium II 400 MHz or faster
❏ RAM: 64 MB or more
❏ Computer with a USB connector
❏ Computer with a CD-ROM drive
(used to install the driver software)
❏ OS: Windows 98 Second Edition
(Windows 98 SE)
Windows 2000 Professional
(Windows 2000)
Windows Millennium Edition
(Windows Me)
Windows XP Home Edition
Windows XP Professional
(Windows XP)
• Not supported by the NEC PC98 series.