Power Supply Interfacing Guide Book

ManualsBrandsSony ManualsSwitchMK7807V1

Video and Audio

Interfacing Guide Book

2002–2003

Summary of content (164 pages)

PAGE 1
Video and Audio Interfacing Guide Book 2002–2003
PAGE 2
C2_IFG_1 02.3.
PAGE 3
*SGC_001-0010 02.3.19 5:36 PM Page 1 Routing Switchers Reference Guide . . . . . . . . . . . . . . . . . . . .2 I/F Processor Functional Index . . . . . . . . . . . . . . . . . . . . . . . .7 I/F Processor Cross Reference Guide . . . . . . . . . . . . . . . . . .8 Routing Switchers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Common Accessories . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
*SGC_001-0010 02.3.
PAGE 5
*SGC_001-0010 02.3.
PAGE 6
*SGC_001-0010 02.3.
PAGE 7
*SGC_001-0010 02.3.
PAGE 8
*SGC_001-0010 02.3.16 4:59 PM Page 6 Routing Switcher Reference Guide Backup CPU boards Each type of backup CPU board is identical to the main CPU board it supports. If the main CPU fails, the backup CPU automatically takes over all control functions and the router continues to function normally. HDS-X5800/X3700/X3600 video routing switchers incorporate a redundant CPU board as standard.
PAGE 9
*SGC_001-0010 02.3.
PAGE 10
*SGC_001-0010 02.3.
PAGE 11
*SGC_001-0010 02.3.
PAGE 12
*SGC_001-0010 02.3.
PAGE 13
*SGC_0011-0038 02.3.16 4:59 PM Page 11 HDS-X5800 . . HDS-X3700 . . HDS-X3600 . . HDS-X3400 . . DVS-128 . . . . DVS-RS1616 . DVS-TC3232 . BVS-A3232 . . BVS-V3232 . . BKS-R1617 . . BKS-R1618 . . BKS-R3216 . . BKS-R3219 . . BKS-R3220 . . BKS-R3240A . BKS-R3242A . BKS-R3248A . BKS-R3280 . . BKS-R3281 . . HKSP-R80. . . BKPF-R70A. . BKS-R5001 . . BZR-2000 . . . BZR-IF310. . . 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 14
*SGC_0011-0038 02.3.16 4:59 PM Page 12 Routing Switchers Routing Switchers HDS-X5800 Multi Bit-Rate Routing Switcher The HDS-X5800 is a large-scale, multi format and multi bit-rate routing switcher for use in Sony S-BUS systems. The HDS-X5800 can be expanded up to a maximum matrix size of 1056 x 272. A range of I/O module handles signals from 143 Mb/s to 1.5 Gb/s. Remote maintenance and remote control routing functions are available via a 100 Base-TX network.
PAGE 15
*SGC_0011-0038 02.3.16 4:59 PM Page 13 Specifications Inputs/outputs Serial digital input: SDI IN connector (BNC type) (up to 264 in steps of 33) 0.8 Vp-p 610%, 75 Ω Channel coding: Scrambled NRZI Cable length SD options: 200 m max. (With Belden 8281, Fujikura 5C2V or equivalent coaxial cable) HD/SD options: 100 m max. (With Belden 1694A, Fujikura 5CFB or equivalent coaxial cable) Input return loss SD options: 15 dB or more (5 MHz to 360 MHz) HD/SD options: 15 dB or more (5 MHz to 1.
PAGE 16
*SGC_0011-0038 02.3.16 4:59 PM Page 14 Routing Switchers Routing Switchers HDS-X3700 Multi Bit-Rate Routing Switchers The HDS-X3000 Series are ultra-compact multi bit-rate routers developed to support every format defined by Rec ITU-R BT605, SMPTE259M (SD), and SMPTE292M (HD) as well as 1080/24P format. A range of I/O modules handles signals from 143 Mb/s up to 1.5 Gb/s. Router control is via S-BUS and RS-422A.
PAGE 17
*SGC_0011-0038 02.3.16 4:59 PM Page 15 Routing Switchers HDS-X3600 Multi Bit-Rate Routing Switchers Routing Switchers The HDS-X3000 Series are ultra-compact multi bit-rate routers developed to support every format defined by Rec ITU-R BT605, SMPTE259M (SD), and SMPTE292M (HD) as well as 1080/24P format. A range of I/O modules handles signals from 143 Mb/s up to 1.5 Gb/s. Router control is via S-BUS and RS-422A.
PAGE 18
*SGC_0011-0038 02.3.16 4:59 PM Page 16 Routing Switchers Routing Switchers HDS-X3400 Multi Bit-Rate Routing Switchers The HDS-X3000 Series are ultra-compact multi bit-rate routers developed to support every format defined by Rec ITU-R BT605, SMPTE259M (SD), and SMPTE292M (HD) as well as 1080/24P format. A range of I/O modules handles signals from 143 Mb/s up to 1.5 Gb/s. Router control is via S-BUS and RS-422A.
PAGE 19
*SGC_0011-0038 02.3.16 4:59 PM Page 17 Routing Switchers DVS-128 Routing Switcher Routing Switchers The DVS-128 is a compact 128 inputs and 128 outputs routing switcher capable of switching analog video, analog audio and digital audio signals at the same time. It can convert an analog audio input into a digital audio output, and vice versa. Installation of up to four 32-input blocks and four 32-output blocks is allowed.
PAGE 20
*SGC_0011-0038 02.3.16 4:59 PM Page 18 Routing Switchers Routing Switchers Specifications Control REMOTE 1: Standard S-BUS Connector type: BNC type (3) Protocol: S-BUS Transfer speed: 312 kb/s/1250 kb/s REMOTE 2: RS-422A Connector type: D-sub 9-pin female (2) Protocol: Sony CART+ protocol Transfer speed: 38.4 kb/s REMOTE 3: RS-232C Connector type: D-sub 9-pin male (1) Protocol: Terminal/ISR/Data Backup Transfer speed: 9600 b/s/38.
PAGE 21
*SGC_0011-0038 02.3.16 4:59 PM Page 19 Routing Switchers DVS-RS1616 RS-422A Remote Routing Switcher Routing Switchers The DVS-RS1616 is a 16 inputs and 16 outputs routing switcher for RS-422A control signals. It can also operate as a 32-port bi-directional router for master/slave applications. Router control is by S-BUS and RS-422A.
PAGE 22
*SGC_0011-0038 02.3.16 4:59 PM Page 20 Routing Switchers Routing Switchers DVS-TC3232 Time Code Routing Switcher The DVS-TC3232 is a 32 inputs and 32 outputs routing switcher for 32 time code signals. Router control is by S-BUS and RS-422A. S-BUS is a highly sophisticated system, providing communication and tally management with BKS-R Series routing switcher control units, Sony DVS Series video switchers and so on. S-BUS also interfaces with third-party equipment.
PAGE 23
*SGC_0011-0038 02.3.16 4:59 PM Page 21 Routing Switchers BVS-A3232 Analog Audio Routing Switcher Routing Switchers The BVS-A3232 is a 32 inputs and 32 outputs routing switcher for analog audio signals. It can also operate as 16 x 16 two-channel switcher for stereo applications. Router control is by S-BUS and RS-422A. S-BUS is a highly sophisticated system, providing communication and tally management with BKS-R Series routing switcher control units, Sony DVS Series video switchers and so on.
PAGE 24
*SGC_0011-0038 02.3.16 4:59 PM Page 22 Routing Switchers Routing Switchers BVS-V3232 Analog Video Routing Switcher The BVS-V3232 is a 32 inputs and 32 outputs routing switcher for NTSC/PAL composite analog video signals. Router control is by S-BUS and RS-422A. S-BUS is a highly sophisticated system, providing communication and tally management with BKS-R Series routing switcher control units, Sony DVS Series video switchers and so on. S-BUS also interfaces with third-party equipment.
PAGE 25
*SGC_0011-0038 02.3.16 4:59 PM Page 23 Routing Switchers BKS-R1617 Multi-Display Control Unit Routing Switchers The BKS-R1617 multi-display control unit controls matrix cross points in routers connected to an S-BUS system. The BKS-R1617 also controls the monitoring output of routers that have this facility. Source and destination switching is performed with 16 buttons. The monitoring signal can also be selected as a destination signal.
PAGE 26
*SGC_0011-0038 02.3.16 4:59 PM Page 24 Routing Switchers Routing Switchers BKS-R1618 Universal Control Unit The BKS-R1618 universal control unit controls matrix cross points in routers connected to an S-BUS system. The BKS-R1618 also controls the monitoring output of routers that have this facility. Source and destination switching is performed with 16 buttons, whose functions are pre-defined with the control terminal connected to the primary station of the S-BUS system.
PAGE 27
*SGC_0011-0038 02.3.16 5:00 PM Page 25 Routing Switchers BKS-R3216 Multi-BUS Control Unit Routing Switchers The BKS-R3216 multi-bus control unit controls matrix cross points in routers connected to an S-BUS system. Any combination of inputs and outputs are controllable with a single ‘take’ button.
PAGE 28
*SGC_0011-0038 02.3.16 5:00 PM Page 26 Routing Switchers Routing Switchers BKS-R3219 Universal Control Unit The BKS-R3219 universal control unit controls matrix cross points in routers connected to an S-BUS system. The BKS-R3219 also controls the monitoring output of routers that have this facility. Source and destination switching is performed with 32 buttons, whose functions are pre-defined with the control terminal connected to the primary station of the S-BUS system.
PAGE 29
*SGC_0011-0038 02.3.16 5:00 PM Page 27 Routing Switchers BKS-R3220 X-Y Control Unit Routing Switchers The BKS-R3220 X-Y control unit controls matrix cross points in routers connected to an S-BUS system. Any combination of inputs and outputs, pre-defined with the control terminal, are controllable with a single ‘take’ button. The names of the selected sources and destinations are shown on the front panel displays.
PAGE 30
*SGC_0011-0038 02.3.16 5:00 PM Page 28 Routing Switchers Routing Switchers BKS-R3240A X-Y Control Unit The BKS-R3240A X-Y control unit controls matrix cross points in routers connected to an S-BUS system. Any combination of inputs and outputs, pre-defined with the control terminal, are controllable with a single ‘take’ button. The names of the selected sources and destinations are shown on the front panel displays.
PAGE 31
*SGC_0011-0038 02.3.16 5:00 PM Page 29 Routing Switchers BKS-R3242A X-Y Control Unit Routing Switchers The BKS-R3242A X-Y control unit controls matrix cross points in routers connected to an S-BUS system. Any combination of inputs and outputs, pre-defined with the control terminal, are controllable with a single “take” button. The names of the selected sources and destinations are shown on the front panel displays. Source and destination switching is performed with 16/32 buttons.
PAGE 32
*SGC_0011-0038 02.3.16 5:00 PM Page 30 Routing Switchers Routing Switchers BKS-R3248A X-Y Control Unit The BKS-R3248A X-Y control unit controls matrix cross points in routers connected to an S-BUS system. Any combination of inputs and outputs, pre-defined with the control terminal, are controllable with a single ‘take’ button.
PAGE 33
*SGC_0011-0038 02.3.16 5:00 PM Page 31 Routing Switchers BKS-R3280 Single Status Display Unit Routing Switchers The BKS-R3280 is single status display unit showing alphabetic and numeric characters with bright, seven-segment, amber displays. The BKS-R3280 displays up to seven characters. Connected to a standard S-BUS or the monitor S-BUS data link, it shows router switching status.
PAGE 34
*SGC_0011-0038 02.3.16 5:00 PM Page 32 Routing Switchers Routing Switchers BKS-R3281 Single Status Display Unit BKS-R3281 is single status display unit showing alphabetic and numeric characters with bright, seven-segment, amber displays. The BKS-R3281 displays up to 16 characters, enabling it to show both source and destination information simultaneously. Connected to a standard S-BUS or the monitor S-BUS data link, it shows router switching status.
PAGE 35
*SGC_0011-0038 02.3.25 10:07 AM Page 33 Routing Switchers HKSP-R80 Routing Switcher Controller Routing Switchers The HKSP-R80 routing switcher controller is a stand-alone primary station CPU board for Sony routing switchers. With the HKSP-R80 installed in a PFV-SP Series signal processing unit, a range of features is provided in addition to the primary functions of S-BUS SUB-NET control and conversion between S-BUS and Ethernet LAN. For CPU redundancy, the HKSP-R81 is available.
PAGE 36
*SGC_0011-0038 02.3.16 5:00 PM Page 34 Routing Switchers Routing Switchers BKPF-R70A Routing Switcher Controller Board The BKPF-R70A routing switcher controller board functions as the primary station of Sony S-BUS remote control system. It has the same control functionality as the CPU board for the Sony digital routing switchers when this is used as the primary station in a system, but with improved overall system and tally response.
PAGE 37
*SGC_0011-0038 02.3.16 5:00 PM Page 35 Routing Switchers BKS-R5001 S-BUS Interface Board Routing Switchers The BKS-R5001 is an S-BUS interface board for installation in an IBM PC/AT compatible machine running BZR-2000 Routing Switcher Control Software. This S-BUS interface board allows control of HDS-X Series routing switcher systems from a PC with BZR-2000 software installed.
PAGE 38
*SGC_0011-0038 02.3.16 5:00 PM Page 36 Routing Switchers Routing Switchers BZR-2000 Routing Switcher Control Software BZR-2000 software is “the complete router control kit”, allowing full configuration, operation and maintenance of an S-BUS system from a single PC terminal. Operating using Windows 95®, Windows98®, Windows2000® or Windows NT™, the software provides multiple graphic display windows for easy operation and management.
PAGE 39
*SGC_0011-0038 02.3.16 5:00 PM Page 37 Routing Switchers BZR-IF310 S-BUS SUB-NET Controller Software Routing Switchers BZR-IF310 S-BUS sub-net controller software installs in the BKPF-R70A routing switcher controller board. BZR-IF310 not only expands the capability of an S-BUS network to interface with a large number of devices, but also provides the advantages of sub-net topology in creating a powerful, fast and convenient network operating environment.
PAGE 40
*SGC_0011-0038 02.3.
PAGE 41
*SGC_0039-0040 02.3.16 5:01 PM Page 39 ECD-C cables . ECD-10C. . . . . ECD-30C. . . . . ECD-3C. . . . . . RCC-R cables . RCC-5R . . . . . 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 42
*SGC_0039-0040 02.3.
PAGE 43
*SGC_0041-0042 02.3.16 5:01 PM Page 41 Common Accessories Common Accessories RMM-30 . . . . . . . . . . . . . . . .
PAGE 44
*SGC_0041-0042 02.3.16 5:01 PM Page 42 Common Accessories Common Accessories RMM-30 Rack Mount Rail The RMM-30 is a rack mount rail designed to mount audio/video equipment into a 19-inch standard rack, and allow the equipment to be pulled forward for servicing access. The RMM-30 consists of a pair of rails (each rail having an inner and an outer rail), a stopper and a bracket. The pair of inner rails are fixed to the unit, while the pair of outer rails are fixed to the 19-inch rack.
PAGE 45
*SGC_0043-0068 02.3.16 5:02 PM Page 43 PFV-SP3100 . PFV-SP3300 . HKSP-008HD HKSP-061M . HKSP-105 . . . HKSP-106 . . . HKSP-300 . . . HKSP-525 . . . HKSP-313 . . . HKSP-1125 . . HKPF-SP003 . HKPF-SP021 . HKPF-SP022 . UCP-8060 . . . 43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 46
*SGC_0043-0068 02.3.19 0:12 AM Page 44 Interface Processor SP Series PFV-SP3100 Signal Processing Unit The PFV-SP3100 is a 1RU signal processing unit that accommodates up to four HKSP/HKPF-SP Series function boards with a redundant power supply. With an HKSP-300 processing module controller installed, PFV-SP Series processing boards can be managed via a LAN 100Base-T Ethernet network.
PAGE 47
*SGC_0043-0068 02.3.19 0:12 AM Page 45 Interface Processor SP Series PFV-SP3300 Signal Processing Unit The PFV-SP3300 is a 3 RU signal processing unit that accommodates up to 17 processing modules that are compliant with multi-format and multi bit-rate operation. It has two reference inputs for SD and HD signals.
PAGE 48
*SGC_0043-0068 02.3.16 5:02 PM Page 46 Interface Processor SP Series HKSP-008HD HD Frame/Line Synchronizer The HKSP-008HD frame/line synchronizer board synchronizes the input HDTV video signal to an external reference. One equalized input, three distribution outputs and one black burst or tri-level sync reference input with passive loop-through output are provided. Three types of operation mode are selectable. When an error in the input signal is detected, a variety of freeze functions are available.
PAGE 49
*SGC_0043-0068 02.3.16 5:02 PM Page 47 Interface Processor SP Series Specifications Interface Processor SP Series Inputs/outputs Video standard: 1035/60, 59.94i 1080/60, 59.94i, 50i 1080/30PsF, 29.97PsF, 25PsF, 24PsF, 23.976PsF HD component serial digital signal (HD SDI): Conforming to SMPTE-292M 1.485/1001, 1.485 Gb/s Serial digital video input: SDI IN connector (BNC type) (1) Reference input: REF IN connector (BNC type) (1) 0.
PAGE 50
*SGC_0043-0068 02.3.16 5:02 PM Page 48 Interface Processor SP Series HKSP-061M 8 x 4 Digital Video Selector The HKSP-061M digital video selector board features 8 inputs x 4 outputs and can route serial digital signals at up to 1.5 Gb/s without any setting changes. A variety of matrix configurations are available. Interface Processor SP Series Features * Multi bit-rate transmission; Auto bit-rate detection, SD SDI signals at 143, 177, 270, 360 and 540 Mb/s, HD SDI signal at 1.
PAGE 51
*SGC_0043-0068 02.3.16 5:02 PM Page 49 Interface Processor SP Series - Inputs/outputs Serial digital video input: SDI in connectors (BNC type) (8) Data transfer rates: 143 Mb/s to 1.485 Gb/s Input signal: Scrambled NRZI, 0.8 Vp-p Input impedance: 75 Ω, unbalanced Input return loss: 15 dB or more (5 MHz to 1.485 GHz) Cable length: 100 m max.
PAGE 52
*SGC_0043-0068 02.3.25 10:10 AM Page 50 Interface Processor SP Series HKSP-105 HD Audio/Video Multiplexer Board The HKSP-105 is a video/audio multiplexer board that multiplexes four AES/EBU format digital audio signals (8 channels) with an HD SDI video signal. Two outputs of the multiplexed signal are provided. By cascading two HKSP-105 boards, a further four AES/EBU signals can be multiplexed onto one HD SDI signal, making a total of eight pairs/sixteen channels.
PAGE 53
*SGC_0043-0068 02.3.16 5:02 PM Page 51 Interface Processor SP Series Inputs/outputs Digital video signal input: HD SDI IN connector (BNC type) (1) HD serial digital signal conforming to SMPTE291M/292M/299M, 1.4835 or 1.485 Gb/s Input impedance: 75 Ω, unbalanced Input return loss: 15 dB or more (5 MHz to 1.485 GHz) Transmission loss: 20 dB or less (at 742.5 MHz) Cable length: 100 m max.
PAGE 54
*SGC_0043-0068 02.3.25 10:12 AM Page 52 Interface Processor SP Series HKSP-106 HD Audio/Video Demultiplexer Board The HKSP-106 is a video/audio de-multiplexer board that de-multiplexes four AES/EBU-format digital audio signals from a multiplexed HD SDI signal. The HD SDI input signal is distributed to two outputs. Up to eight pairs/sixteen channels of audio can be separated from a multiplexed HD SDI signal by connecting two HKSP-106 boards in cascade.
PAGE 55
*SGC_0043-0068 02.3.16 5:02 PM Page 53 Interface Processor SP Series Inputs/outputs Digital video signal input: HD SDI IN connector (BNC type) (1) HD serial digital signal conforming to SMPTE291M/292M/299M, 1.4835 or 1.485 Gb/s Input impedance: 75 Ω, unbalanced Input return loss: 15 dB or more (5 MHz to 1.485 GHz) Transmission loss: 20 dB or less (at 742.5 MHz) Cable length: 100 m max.
PAGE 56
*SGC_0043-0068 02.3.16 5:02 PM Page 54 Interface Processor SP Series HKSP-300 Processing Module Controller With an HKSP-300 processing module controller installed, the function boards accommodated within the same PFV-SP Series processing units can be controlled from a UCP-8060 universal control panel over an Ethernet-based network. A redundant CPU is available by installing two HKSP-300 boards.
PAGE 57
*SGC_0043-0068 02.3.16 5:02 PM Page 55 Interface Processor SP Series Down Converter Board The HKSP-525 down converter board converts an HD SDI signal to an SD SDI signal. It accepts an HD SDI input with embedded audio, and provides three SD SDI outputs (525/625) with embedded audio, plus an analog monitor output. Now Printing Features *Down converts an HD SDI signal to an SD SDI (D1) signal; From 1035(1125) / 59.94i, 29.97PsF to 480(525) / 59.94i, 29.97PsF, From 1080(1125) / 59.94i, 29.
PAGE 58
*SGC_0043-0068 02.3.16 5:02 PM Page 56 Interface Processor SP Series Interface Processor SP Series Specifications Inputs/outputs Digital video signal input: HD SDI IN connector (BNC type) (1) HD serial digital video signal conforming to SMPTE291M/292M/299M Input impedance: 75 Ω, unbalanced Input return loss: 15 dB or more (5 M to 1.5 GHz) Transmission loss: Less than 20 dB Cable length: 100 m max. (when using a 5C-FB coaxial cable) Data rate: 1.4835 or 1.
PAGE 59
*SGC_0043-0068 02.3.25 10:13 AM Page 57 Interface Processor SP Series HKSP-313 HD Color Corrector Board The HKSP-313 color corrector board provides control of various color control parameters for different types of signal and complies with multiple HD formats. It also provides line conversion between 1035 and 1080, and format conversion between 1080 and 720P.
PAGE 60
*SGC_0043-0068 02.3.16 5:02 PM Page 58 Interface Processor SP Series Interface Processor SP Series Specifications Inputs/outputs Digital video signal input: HD SDI IN connector (BNC type) (1) HD component serial digital signal conforming to SMPTE291M/292M/299M, 1.4835 or 1.485 Gb/s Input impedance: 75 Ω, unbalanced Input return loss: 15 dB or more (5 MHz to 1.485 GHz) Transmission loss: 20 dB or less (at 742.5 MHz) Cable length: 100 m max.
PAGE 61
*SGC_0043-0068 02.3.25 10:14 AM Page 59 Interface Processor SP Series HKSP-1125 HD Up-converter Board The HKSP-1125 is a 525-line or a 625-line to 1125i or 720P up-converter with an auto colorimetry selection capability and selectable output modes. The HKSP-1125 accepts inputs in conventional NTSC composite analog or NTSC composite serial digital or 525/625 component serial digital signal format, and provides three HD serial digital outputs to the 1125i or 720P interlaced HDTV standard.
PAGE 62
*SGC_0043-0068 02.3.19 0:12 AM Page 60 Interface Processor SP Series Interface Processor SP Series Specifications Inputs/outputs Digital signal input: SDI IN connector (BNC type) (1), NTSC composite or 525/625 component serial digital signal with embedded audio conforming to SMPTE259M-A/C (ITU-R BT.601/BT.
PAGE 63
*SGC_0043-0068 02.3.16 5:02 PM Page 61 Interface Processor SP Series HKPF-SP003 Digital Video Distribution Amp The HKPF-SP003 distributes a multi-bit rate signal from 143 Mb/s to 1.5 Gb/s to six outputs. The input signal is re-clocked before distribution. Features *Distribution of an SD or HD SDI signal *Re-clocking at 143 Mb/s, 177 Mb/s, 270 Mb/s, 360 Mb/s, 540 Mb/s, 1.5 Gb/s *Six distribution outputs *Auto bit rate detection *Auto cable equalization of up to 100 m (at 1.
PAGE 64
*SGC_0043-0068 02.3.16 5:02 PM Page 62 Interface Processor SP Series Interface Processor SP Series Specifications Inputs/outputs Serial digital input: SDI IN connector (BNC type) (1) Data transfer rate: 143 Mb/s to 1.485 Gb/s Input signal: Scramble NRZI signal, 0.8 V p-p Input return loss: 15 dB or more (5 MHz to 1.
PAGE 65
*SGC_0043-0068 02.3.16 5:02 PM Page 63 Interface Processor SP Series HKPF-SP021 Optical to Electrical Converter The HKPF-SP021 is an optical to electrical signal converter with an operational frequency range of 143 Mb/s to 1.5 Gb/s. In combination with the HKPF-SP022 electrical to optical converter board, it extends the transmission distance over an optical fiber to two km. The HKPF-SP021 has one optical input and provides three electrical digital outputs.
PAGE 66
*SGC_0043-0068 02.3.16 5:02 PM Page 64 Interface Processor SP Series Interface Processor SP Series Specifications Inputs/outputs OPTICAL IN connector: SC/PC type (1) Adaptive plug : SC/PC type plug (1) Adaptive cable: 1310 nm single mode optical fiber Optical device: Photo diode Laser wavelength: 1310 nm Input signal: Scrambled NRZI Optical input level: -14.6 dBm to -4.5 dBm SDI OUT connectors: BNC Type (3) Data transfer rate: 143 Mb/s to 1.485 Gb/s Output amplitude: 0.
PAGE 67
*SGC_0043-0068 02.3.16 5:02 PM Page 65 Interface Processor SP Series HKPF-SP022 Electrical to Optical Converter The HKPF-SP022 converts a variety of serial digital electrical signals to optical signals and re-clocks them at a bit rate from 143 Mb/s to 1.5 Gb/s. In combination with the HKPF-SP021 Optical To Electrical Converter board, it provides a transmission distance over an optical fiber of up to 2 km. The bit rate of the input video signal can be detected automatically.
PAGE 68
*SGC_0043-0068 02.3.16 5:02 PM Page 66 Interface Processor SP Series Interface Processor SP Series Specifications Inputs/outputs SDI IN connector: BNC type (1) Data transfer rate: 143 Mb/s to 1.485 Gb/s Input signal: Scrambled NRZI, 0.8 V p-p Input return loss: 15 dB or more (5 MHz to 1.485 GHz) Input cable length: 100 m (when a 5C-FB cable (Fujikura) or Belden 1694 coaxial cable or the equivalent is used) Active loop-through out: BNC Type (1) Data transfer rate: 143 Mb/s to 1.
PAGE 69
*SGC_0043-0068 02.3.16 5:02 PM Page 67 Interface Processor SP Series UCP-8060 Universal Control Panel The UCP-8060 universal control panel can be used for a wide range of applications where control of PFV-SP Series is required. Its compact size and low-profile design makes the UCP-8060 compatible in almost any system environment. A color touch screen helps to provide quick and positive operation.
PAGE 70
*SGC_0043-0068 02.3.
PAGE 71
*SGC_0069-0098 02.3.16 5:03 PM Page 69 PFV-L10 . . . . BKPF-L601C . BKPF-L602C . BKPF-L603 . . BKPF-L605 . . BKPF-L606 . . BKPF-L608C . BKPF-L611 . . BKPF-L612 . . BKPF-L613C . BKPF-L632 . . BKPF-L641 . . BKPF-L642 . . BKPF-L653 . . BKPF-L703A . BKPF-L704 . . BKPF-L723 . . BKPF-L751 . . BKPF-L752 . . BKPF-L753A . BKPF-L754 . . BKPF-L803 . . 69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 72
*SGC_0069-0098 02.3.16 5:03 PM Page 70 Interface Processor L Series PFV-L10 Interface unit The PFV-L10 is a 19-inch rack mountable compact interface unit with an impressive price/performance ratio. Only 2U high, it makes small demands on space in equipment environments. Up to 10 BKPF-L Series function boards can be accommodated in any combination. The controls of these boards are all accessible from the front of the PFV-L10, and all boards can be hot-swapped.
PAGE 73
*SGC_0069-0098 02.3.16 5:03 PM Page 71 Interface Processor L Series BKPF-L601C Video A to D Converter Board The BKPF-L601C is a high quality yet cost effective A to D converter board which converts a 525 or 625-line component analog video signal to a component serial digital video signal. Y, B-Y, R-Y or RGB signals can be input. Four distribution outputs of the converted signal are provided.
PAGE 74
*SGC_0069-0098 02.3.16 5:03 PM Page 72 Interface Processor L Series BKPF-L602C Video D to A Converter Board The BKPF-L602C is a high quality yet cost effective video D to A converter board which converts a 525 or 625-line component serial digital video signal to a component analog video signals. Y, B-Y, R-Y or RGB signals can be selected for outputs. Two distribution outputs of the converted signal are provided.
PAGE 75
*SGC_0069-0098 02.3.16 5:03 PM Page 73 Interface Processor L Series BKPF-L603 SDI Distribution Board The BKPF-L603 SDI distribution board accepts a 525/625 component serial digital or NTSC/PAL composite serial digital video signal and distributes it to eight outputs. The output cable length can be up to 200 m (Belden 8281, Fujikura 5C2V or equivalent cable).
PAGE 76
*SGC_0069-0098 02.3.16 5:03 PM Page 74 Interface Processor L Series Interface Processor L Series Specifications Inputs/outputs Serial digital input: SDI IN connector (BNC type) (1) Serial digital outputs: SDI OUT connectors (BNC type) (8) 0.8 Vp-p, 75 Ω Data transmission Channel coding: Scrambled NRZI Transmission speed: 143 Mb/s (NTSC composite serial digital) 177 Mb/s (PAL composite serial digital) 270 Mb/s (525/625 component serial digital) Amplitude: 0.8 Vp-p-10% Cable length: 200 m max.
PAGE 77
*SGC_0069-0098 02.3.16 5:03 PM Page 75 Interface Processor L Series BKPF-L605 Audio/Video Multiplexer Board The BKPF-L605 is an audio/video multiplexer that embeds two AES/EBU stereo pairs (four individual channels) into a 525/625 component or NTSC composite serial digital video signal, offering lower system cost by reducing the number of modules required for multiple Audio Group multiplexing.
PAGE 78
*SGC_0069-0098 02.3.16 5:03 PM Page 76 Interface Processor L Series BKPF-L606 Audio/Video Demultiplexer Board The BKPF-L606 is an audio/video demultiplexer board that extract AES/EBU format digital audio signals from a multiplexed 525/625 component serial or NTSC composite serial digital video signal. A single BKPF-L606 board will extract two AES/EBU stereo pairs (four audio channels).
PAGE 79
*SGC_0069-0098 02.3.16 5:03 PM Page 77 Interface Processor L Series BKPF-L608C 4:2:2 Frame/Line Synchronizer Board The BKPF-L608C is a 4:2:2 frame/line synchronizer board used to that synchronizes a 4:2:2 component serial digital video input signal to an external analog reference. This 10-bit serial 4:2:2 synchronizer features a Freeze control that is field/frame auto/manual selectable and also includes phase adjustment.
PAGE 80
*SGC_0069-0098 02.3.16 5:03 PM Page 78 Interface Processor L Series Interface Processor L Series Specifications Inputs/outputs Video standard: 525/625, 4:2:2 component serial digital signal (SDI), conforming to SMPTE259M-C, 270 Mb/s Serial digital input: SDI IN connector (BNC type) (1) Digital input return loss: 15 dB or more (5 MHz to 270 MHz) Cable length: 200 m max.
PAGE 81
*SGC_0069-0098 02.3.16 5:03 PM Page 79 Interface Processor L Series BKPF-L611 3-ch SDI Distribution Board The BKPF-L611 is a three-input SDI distribution amplifier board, distributing each input to two outputs. It accepts any component or composite serial digital video signal. The BKPF-L611 can operate at bit rates of up to 540 Mb/s (143, 177, 270, 360 and 540 Mb/s serial formats) and can be used for DVB/ASI signal distribution.
PAGE 82
*SGC_0069-0098 02.3.16 5:03 PM Page 80 Interface Processor L Series BKPF-L612 2-ch SDI Distribution Board The BKPF-L612 is a two-input SDI distribution amplifier board, distributing each input to four outputs. It accepts any component or composite serial digital video signal. The BKPF-L612 can operate at bit rates of up to 540 Mbps (143, 177, 270, 360 and 540 Mb/s serial formats) and can be used for DVB/ASI signal distribution.
PAGE 83
*SGC_0069-0098 02.3.16 5:03 PM Page 81 Interface Processor L Series BKPF-L613C Monitoring SDI Distribution Board The BKPF-L613C monitoring SDI distribution board accepts a 525/625 component serial digital video signal and distributes it to four outputs. An active loop-through output of the input signal is also provided. A D to A converter also provides four analog outputs for monitoring purposes.
PAGE 84
*SGC_0069-0098 02.3.16 5:03 PM Page 82 Interface Processor L Series Interface Processor L Series Specifications Inputs/outputs Serial digital input: SDI IN connector (BNC type) (1) 0.8 Vp-p610%, 75 Ω 525/625 component serial digital signal conforming to SMPTE259M-C (ITU-R BT.601/BT.656), 270 Mb/s Serial digital outputs: Active-through output connectors (BNC type) (4) 0.8 Vp-p610%, 75 Ω Serial digital video signal of the same format as that to the input connector SDI OUT connectors (BNC type) (4) 0.
PAGE 85
*SGC_0069-0098 02.3.16 5:03 PM Page 83 Interface Processor L Series BKPF-L632 Monitoring Composite Encoder Board The BKPF-L632 is 525/625 component serial digital to NTSC/PAL composite analog encoder board. It has two component inputs, and provides three distribution outputs from each input. Either 525 or 625-line input signals can be converted and encoded to NTSC/PAL composite analog video signals. 8-bit processing is used to provide output signals suitable for picture monitoring purposes.
PAGE 86
*SGC_0069-0098 02.3.16 5:03 PM Page 84 Interface Processor L Series BKPF-L641 NTSC/PAL To 4:2:2 Decoder Board The BKPF-L641 is a decoder board that converts an NTSC/PAL composite analog input signal into a 4:2:2 component serial digital video output signal. This decoder board features 10-bit digital internal processing, a three-line adaptive comb filter and a frame synchronizer.
PAGE 87
*SGC_0069-0098 02.3.16 5:03 PM Page 85 Interface Processor L Series Inputs/outputs Analog video input: Analog IN connector (BNC type) (1), 1.0 Vp-p, 75 Ω, NTSC/PAL composite analog video signal Reference input: REF IN connector (BNC type) (1), 0.3 Vp-p 610%, 75 Ω, black burst signal Analog video output: Passive loop-through output connector (BNC type) (1), 1.0 Vp-p, 75 Ω, NTSC/PAL composite analog video signal Serial digital outputs: SDI OUT Connectors (BNC type) (4), 0.
PAGE 88
*SGC_0069-0098 02.3.16 5:03 PM Page 86 Interface Processor L Series BKPF-L642 4:2:2 To NTSC/PAL Encoder Board The BKPF-L642 is an encoder board that converts a component 4:2:2 serial digital signal into an NTSC/PAL composite analog signal. It features 12-bit internal processing (10-bit signal path), 2x over sampling and a line synchronizer.
PAGE 89
*SGC_0069-0098 02.3.16 5:03 PM Page 87 Interface Processor L Series Inputs/outputs Serial digital input: SDI IN connector (BNC type) (1), 0.8 Vp-p, 75 Ω, 4:2:2 component serial digital signal, conforming to SMPTE-259M-C, 270 Mb/s Reference input: REF IN connector (BNC type) (1), 0.3 Vp-p 610%, 75 Ω, black burst signal Digital input return loss: 15 dB or more (5 MHz to 270 MHz) Serial digital output: Active loop-through output connector (BNC type) (1), 0.
PAGE 90
*SGC_0069-0098 02.3.16 5:03 PM Page 88 Interface Processor L Series BKPF-L653 AES/EBU Distribution Board The BKPF-L653 is a AES/EBU distribution board that operates in single eight-output or dual four-output modes for 75 Ω AES/EBU signals. Ten BKPF-L653 fit in one 2U PFV-L10 frame and provide high packing density of up to 80 AES/EBU distribution outputs within 2U rack space.
PAGE 91
*SGC_0069-0098 02.3.16 5:03 PM Page 89 Interface Processor L Series BKPF-L703A Analog Video Distribution Board The BKPF-L703A analog video distribution board accepts an NTSC/PAL composite analog video signal and distributes it to eight outputs. The output cable length can be up to 300 m (Belden 8281, Fujikura 5C2V or equivalent cable).
PAGE 92
*SGC_0069-0098 02.3.16 5:03 PM Page 90 Interface Processor L Series Interface Processor L Series Specifications Inputs/outputs Video input: VIDEO IN connector (BNC type) (1) Video outputs: Loop-through output connector (BNC type) (1) VIDEO OUT connectors (BNC type) (8) 1 Vp-p, 75 Ω Video characteristics Frequency response: 5 MHz (-0.
PAGE 93
*SGC_0069-0098 02.3.16 5:03 PM Page 91 Interface Processor L Series BKPF-L704 Black Burst Regenerator Board The BKPF-L704 is an analog I/O black burst regenerator board with a range of NTSC system applications. For example, it can be used in a mixed analog/digital system, delaying the sync signal to the analog equipment to compensate for the longer video delay of the digital equipment.
PAGE 94
*SGC_0069-0098 02.3.16 5:03 PM Page 92 Interface Processor L Series BKPF-L723 Video Delay Distribution Board The BKPF-L723 is a video delay distribution board with an adjustable delay range of 50 ns to 1430 ns. It accepts either an NTSC or PAL analog video signal, and distributes the delayed video signal to eight outputs. Up to 300 m of output video cable can be equalized. The board is designed for a range of different applications, making it a valuable system integration tool.
PAGE 95
*SGC_0069-0098 02.3.16 5:03 PM Page 93 Interface Processor L Series BKPF-L751 Audio A to D Converter Board The BKPF-L751 is a dual channel audio analog to digital converter board that accepts up to two analog audio stereo inputs and converts them into two AES/EBU format outputs. The signals carried by the two AES/EBU outputs can be interchanged. Conversion is at a resolution of 24 bits and at a sampling frequency of 48 kHz.
PAGE 96
*SGC_0069-0098 02.3.16 5:03 PM Page 94 Interface Processor L Series Interface Processor L Series Specifications Inputs/outputs Analog audio inputs: AUDIO IN connectors (Phoenix type 6-pin) (2; 4 channels -2 stereo pairs) Input level: + 4 dBm (600 Ω/20 kΩ selectable, balanced) Reference input: REF VIDEO/WORD CLOCK IN connector (BNC type) (1) Video input: 0.3 Vp-p (525/29.9 Hz, 625/25 Hz, 1125/60 Hz) Word sync: 0.5 to 5.
PAGE 97
*SGC_0069-0098 02.3.16 5:03 PM Page 95 Interface Processor L Series BKPF-L752 Audio D to A Converter Board The BKPF-L752 is a dual channel digital audio to analog audio converter board. It converts each of two AES/EBU stereo-digital input signals into two monaural analog audio signals at a resolution of 24 bits/sample at 48 kHz. A de-emphasis function is provided.
PAGE 98
*SGC_0069-0098 02.3.16 5:03 PM Page 96 Interface Processor L Series BKPF-L753A Analog Audio Distribution Board The BKPF-L753A analog audio distribution board distributes an analog stereo audio signal to four outputs or an analog monaural audio signal to eight outputs. A gain control allows the input reference level to be varied between -4 dBm and +12 dBm. Phoenix type connector for each distribution block carries its input and output signals.
PAGE 99
*SGC_0069-0098 02.3.16 5:03 PM Page 97 Interface Processor L Series BKPF-L754 Audio Signal Generator Board The BKPF-L754 is an audio signal generator board that has a dual audio signal generator. Each signal generator can be selected between 1 kHz or 440 Hz (440 Hz switchable to 400 Hz) via GPI or on-board switch. Three-channel outputs of each of these two signals are provided. Normally the left and right channels carry the same frequency, but they can be switched to carry different frequencies.
PAGE 100
*SGC_0069-0098 02.3.16 5:03 PM Page 98 Interface Processor L Series BKPF-L803 S-BUS Distribution Board The BKPF-L803 is a two-input, eight-output S-BUS distribution board. It can be switched to provide four outputs from each of its inputs, or eight outputs from one input. The Sony S-BUS router control system has already earned an excellent reputation for the operational flexibility it brings to many system applications.
PAGE 101
*SGC_0099-0116 02.3.16 5:04 PM Page 99 Interface Processor D Series HDTV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 101 102 103 104 105 106 107 109 110 111 113 115 116 Interface Processor D Series PFV-HD50A . . PFV-HD300A .
PAGE 102
*SGC_0099-0116 02.3.16 5:04 PM Page 100 Interface Processor D Series PFV-HD50A HD Digital Video Interface Unit HKPF Series boards provide a range of audio and video signal processing and distribution functions for HDTV signals. The PFV-HD50A HD digital video interface unit accommodates up to four of these boards, providing an interface for HDTV system connections. The interface unit supplies power to the boards, an optional BKPF-PS50A backup power supply can be installed for critical applications.
PAGE 103
*SGC_0099-0116 02.3.16 5:04 PM Page 101 Interface Processor D Series PFV-HD300A HD Digital Video Interface Unit HKPF Series boards provide a range of audio and video signal processing and distribution functions for HDTV signals. The PFV-HD300A HD digital video interface unit accommodates up to 14 of these boards, providing an interface for HDTV system connections. The interface unit supplies power to the boards, an optional HKPF-PS300 backup power supply can be installed for critical applications.
PAGE 104
*SGC_0099-0116 02.3.16 5:04 PM Page 102 Interface Processor D Series HKPF-101 HD A to D Converter Board The HKPF-101 HD A to D converter board converts an HD component analog video signal to an HD component serial digital video signal. The input signal can be either in Y/PB /PR or RGB format. Four outputs of the converted signal are provided. The HKPF-101 is switchable to operate between 1080 and 1035 active lines and automatically switches between 59.94 and 60.00 Hz field rate operation.
PAGE 105
*SGC_0099-0116 02.3.16 5:04 PM Page 103 Interface Processor D Series HKPF-102 HD D to A Converter Board The HKPF-102 HD D to A converter board converts an HD component serial digital video signal to an HD component analog video signal. The input is switchable to accept either a Y/PB /PR or RGB format signal. Two sets of outputs are provided. The HKPF-102 automatically switches between 1080 and 1035 active lines and 59.94 or 60.00 Hz field rate operation.
PAGE 106
*SGC_0099-0116 02.3.16 5:04 PM Page 104 Interface Processor D Series HKPF-103M HD Digital Video Distribution Board The HKPF-103M HD digital video distribution board accepts an HD component serial digital video input signal and distributes it to six outputs. Automatic equalization is provided for input cable lengths of up to 100 m (with Fujikura 5C-FB or PD-3709 Cooper RG-6/U or equivalent cable).
PAGE 107
*SGC_0099-0116 02.3.16 5:04 PM Page 105 Interface Processor D Series HKPF-105M HD Audio/video Multiplexer Board The HKPF-105M is a video/audio multiplexer board that multiplexes four AES/EBU format digital audio signals (8 channels) with an SMPTE291M/292M/299M format component serial digital video signal. Two outputs of the multiplexed signal are provided.
PAGE 108
*SGC_0099-0116 02.3.16 5:05 PM Page 106 Interface Processor D Series HKPF-106M HD Audio/Video Demultiplexer Board The HKPF-106M is a video/audio demultiplexer board that demultiplexes four AES/EBU-format digital audio signals from a multiplexed SMPTE291M/292M/299M component serial digital video signal. The input video signal is distributed to two outputs.
PAGE 109
*SGC_0099-0116 02.3.16 5:05 PM Page 107 Interface Processor D Series HKPF-1125A HD up-converter board The HKPF-1125A is a 525-line or a 625-line to 1125-line up-converter with an auto colorimetry selection capability and selectable output modes. To produce optimum image quality, it also features a motion adaptive conversion mode, anti image enhancer, colorimetry and gamma correction functions.
PAGE 110
*SGC_0099-0116 02.3.16 5:05 PM Page 108 Interface Processor D Series Interface Processor D Series Specifications Inputs/outputs Digital signal input: VIDEO IN SDI connector (BNC type) (1), NTSC composite or 525/625 component serial digital signal with embedded audio conforming to SMPTE259M-A/C (ITU-R BT.601/BT.656), 270 Mb/s,143 Mb/s, 75 Ω, unbalanced Cable length: 200 m max.
PAGE 111
*SGC_0099-0116 02.3.16 5:05 PM Page 109 Interface Processor D Series HKPF-525V HD-SD downconverter board The HKPF-525 HD downconverter board converts a HD component serial digital video signal to a SD component serial digital signal and distributes it to four outputs. The 525-line component output signal format is selectable to 4:2:2 Y/B-Y/R-Y, 4:4:4 Y/B-Y/R-Y or 4:4:4 GBR. In the case of 4:4:4 format signals, only two outputs are available.
PAGE 112
*SGC_0099-0116 02.3.16 5:05 PM Page 110 Interface Processor D Series HKPF-525AV HD-SD downconverter board The HKPF-525 HD downconverter board converts a HD component serial digital video signal to a SD component serial digital signal and distributes it to four outputs. The 525-line component output signal format is selectable to 4:2:2 Y/B-Y/R-Y, 4:4:4 Y/B-Y/R-Y or 4:4:4 GBR. In the case of 4:4:4 format signals, only two outputs are available.
PAGE 113
*SGC_0099-0116 02.3.16 5:05 PM Page 111 Interface Processor D Series HKPF-D270 HDCAM decoder board The HKPF-D270 HDCAM Decoder Board is designed to convert SDTI (HDCAM) signals to HD SDI signals (conforming to SMPTE292M/BTA S-004B). The bit rate and the maximum transmission distance are common between SDTI and SDI.
PAGE 114
*SGC_0099-0116 02.3.16 5:05 PM Page 112 Interface Processor D Series Interface Processor D Series Specifications Inputs/outputs Digital input: SDTI IN (HDCAM) connector (BNC type) (1) HDCAM over SDTI signal conforming to SMPTE305M Input impedance: 75 Ω, unbalanced Input return loss: 15 dB or more (5 MHz to 270 MHz) Cable length: HD-SDI: 100 m max. (When using 5CFB coaxial cable or equivalent cable) SDTI: 200 m max.
PAGE 115
*SGC_0099-0116 02.3.16 5:05 PM Page 113 Interface Processor D Series HKPF-E270 HDCAM encoder board The HKPF-E270 HDCAM Encoder Board is designed to convert HD SDI signals (conforming to SMPTE292M/BTA S-004B) to SDTI (HDCAM) signals. The bit rate and the maximum transmission distance are common between SDTI and SDI.
PAGE 116
*SGC_0099-0116 02.3.16 5:05 PM Page 114 Interface Processor D Series Interface Processor D Series Specifications Inputs/outputs Digital signal input: DIGITAL IN (HDCAM) connector (BNC type) (1), HD serial digital signal conforming to SMPTE291M/292M/299M,BTA-004B/005B/00 6B) Input impedance: 75 Ω, unbalanced Input return loss: 15 dB or more (5 MHz to 741.8 MHz) 10 dB or more (741.8 MHz to 1.484 GHz) Transmission loss: 20 dB or less (at 741.8 MHz) Cable length: HD-SDI: 100 m max.
PAGE 117
*SGC_0099-0116 02.3.16 5:05 PM Page 115 Interface Processor D Series HKPF-9000 Multi-format converter The HKPF-9000 multi-format converter converts 1080/24P HDTV format signals to a variety of HD/SD formats. It provides optional functions that convert SDTV or 720P to HDTV 1080, frame rate and aspect ratio. For details, see the Format Conversion Table. The HKPF-9000 is configured as two boards for installation in the PFV-HD Series Interface Units in any combination with other HKPF Series boards.
PAGE 118
*SGC_0099-0116 02.3.16 5:05 PM Page 116 Interface Processor D Series HKDV-900 HD Digital Video Controller The HKDV-900 digital video controller connects to HDW-F500/500/2000 HD digital VTRs and controls the HD/SD output video signals and the image enhancer of the down converter built into these VTR.
PAGE 119
*SGC_0117-0132 02.3.16 5:05 PM Page 117 Interface Processor D Series SDTV SDTV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 119 120 121 123 124 126 128 129 130 131 Interface Processor D Series PFV-D10 . . . PFV-D50A . . PFV-D300 . . BKPF-012A . BKPF-021 . . BKPF-205 . .
PAGE 120
*SGC_0117-0132 02.3.16 5:05 PM Page 118 Interface Processor D Series PFV-D10 Digital Video Interface Unit BKPF Series boards provide a wide range of audio and video signal processing and distribution functions for analog and digital signals. The PFV-D10 digital video interface unit accommodates any one of these boards, providing an interface for system connections. The PFV-D10 supplies power to the board and includes BNC connectors for a looped video reference signal input and S-BUS remote control.
PAGE 121
*SGC_0117-0132 02.3.16 5:05 PM Page 119 Interface Processor D Series PFV-D50A Digital Video Interface Unit BKPF Series boards provide a wide range of audio and video signal processing and distribution functions for analog and digital signals. The PFV-D50A digital video interface unit accommodates up to four of these boards, providing an interface for system connections. One of these boards can be a BKPF-500, providing an interface to an ISR system.
PAGE 122
*SGC_0117-0132 02.3.16 5:05 PM Page 120 Interface Processor D Series PFV-D300 Digital Video Interface Unit BKPF Series boards provide a wide range of audio and video signal processing and distribution functions for analog and digital signals. The PFV-D300 digital video interface unit accommodates up to 14 of these boards, providing an interface for system connections. One of these boards can be a BKPF-500, providing an interface to an ISR system.
PAGE 123
*SGC_0117-0132 02.3.16 5:06 PM Page 121 Interface Processor D Series BKPF-012A 525-line component digital to NTSC composite analog/digital video converter board The BKPF-012A converts a 525-line component serial digital video signal into both an NTSC composite serial digital and an NTSC composite analog video signal. Four outputs of the composite serial digital signal and two outputs of the composite analog signal are provided.
PAGE 124
*SGC_0117-0132 02.3.16 5:06 PM Page 122 Interface Processor D Series Interface Processor D Series Specifications Inputs/outputs Serial digital input: SDI IN connector (BNC type) (1) 0.8 Vp-p, 75 Ω Serial digital outputs: Active through-out connector (BNC type) (1) 0.8 Vp-p610%, 75 Ω SDI OUT connectors (BNC type) (4) 0.
PAGE 125
*SGC_0117-0132 02.3.16 5:06 PM Page 123 Interface Processor D Series BKPF-021 NTSC Composite Digital to 525-Line Component Digital Video Converter Board The BKPF-021 converts an NTSC composite serial digital video signal to a 525-line component serial digital video signal with 10-bit resolution. A frame synchronizing function synchronizes the output video signal to either an external reference signal or the input signal.
PAGE 126
*SGC_0117-0132 02.3.16 5:06 PM Page 124 Interface Processor D Series BKPF-205 Audio/Video Multiplexer Board The BKPF-205 is an audio/video multiplexer board that converts four analog audio signals to two AES/EBU digital audio signals. These signals are then multiplexed on to a 525/625 component serial digital or NTSC composite serial digital video signal input to the board. Two outputs of this multiplexed video signal are provided.
PAGE 127
*SGC_0117-0132 02.3.16 5:06 PM Page 125 Interface Processor D Series Inputs/outputs SDI input: SDI IN connector (BNC type) (1) NTSC composite or 525/625 component serial digital signal conforming to SMPTE259M-A/C (ITU-R BT.601/BT.656); 143, 270, Mb/s (Selectable with on-board switch) Input impedance: 75 Ω Input return loss: 15 dB or more Cable length: 200 m max.
PAGE 128
*SGC_0117-0132 02.3.16 5:06 PM Page 126 Interface Processor D Series BKPF-206 Audio/Video Demultiplexer Board The BKPF-206 is an audio/video demultiplexer board that separates the digital audio signals multiplexed onto a component serial digital or NTSC composite serial digital video signal. After demultiplexing, the digital audio signals are converted to analog audio signals and output.
PAGE 129
*SGC_0117-0132 02.3.16 5:06 PM Page 127 Interface Processor D Series Inputs/outputs SDI input: SDI IN connector BNC type (1) NTSC composite or 525/625 component serial digital signal conforming to SMPTE259M-A/C (ITU-R BT.601/BT.656); 143, 270, Mb/s (selectable with on-board switch) Input impedance: 75 Ω Input return loss: 15 dB or more Cable length: 200 m max.
PAGE 130
*SGC_0117-0132 02.3.16 5:06 PM Page 128 Interface Processor D Series BKPF-300 Digital Video Selector Board The BKPF-300 digital video selector board is an eight input to two output switching matrix for component digital signals. Crosspoint information is memorized for 24 hours. Up to 14 BKPF-300 boards can be integrated to form a 112 input, 2 output, and switching matrix.
PAGE 131
*SGC_0117-0132 02.3.16 5:06 PM Page 129 Interface Processor D Series BKPF-301 Analog Video Selector Board The BKPF-301 analog video selector board is an eight input to two output switching matrix for NTSC/PAL composite analog signals. Cross point information is memorized for 24 hours.Up to four BKPF-301 boards can be integrated to form a 32 input, 2 output, and switching matrix.
PAGE 132
*SGC_0117-0132 02.3.16 5:06 PM Page 130 Interface Processor D Series BKPF-350 Digital Audio Selector Board The BKPF-350 digital audio selector board is an eight input to two output switching matrix for AES/EBU audio signals. Crosspoint information is memorized for 24 hours. Up to 14 BKPF-350 boards can be integrated to form a 112 input, 2 output switching matrix. Input and outputs are via BNC connectors.
PAGE 133
*SGC_0117-0132 02.3.16 5:06 PM Page 131 Interface Processor D Series BKPF-351 Analog Audio Selector Board The BKPF-351 analog audio selector board is an eight stereo input to one stereo output switching matrix for analog audio signals. Cross point information is memorized for 24 hours. Up to four BKPF-350 boards can be integrated to form a 32 input, 1 output stereo switching matrix. Inputs are via two D-sub 25-pin connectors and the output via a Phoenix type 6-pin connector.
PAGE 134
*SGC_0117-0132 02.3.
PAGE 135
*SGC_0133-0142 02.3.16 5:07 PM Page 133 Interface Processor Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 136
*SGC_0133-0142 02.3.
PAGE 137
*SGC_0133-0142 02.3.16 5:07 PM Page 135 Interface Processor Others BKSI-2010 Disk Controller Board The BKSI-2010 disk controller board converts SDDI (Serial Digital Data Interface) signals to SCSI format signals and outputs them to be recorded on HDD arrays. SCSI format playback signals from HDD arrays are converted back to SDDI format signals. As standard, the BKSI-2010 supports two BKSI-2030 bit rate reduction boards, which convert the SDDI output signal to SDI.
PAGE 138
*SGC_0133-0142 02.3.16 5:07 PM Page 136 Interface Processor Others BKSI-2020 Bit Rate Reduction Encoder Board The BKSI-2020 bit rate reduction encoder board accepts an SDI signal, two AES/EBU digital audio signals and a time code signal. The SDI signal is compressed and, together with the digital audio and time code signals, converted to an SDDI format signal and output.
PAGE 139
*SGC_0133-0142 02.3.16 5:07 PM Page 137 Interface Processor Others BKSI-2040 Intelligent Device Controller (IDC) CPU Board The BKSI-2040 IDC CPU board is used in two ways. As a root controller the board receives commands from a Server Management System Gateway (SMS/GW) computer and provides control to other BKSI-2040 boards used as sub-IDC boards within an SIU-80 interface unit. As a device controller (sub-IDC board) it provides control for servers, routers, VTRs and other remote devices.
PAGE 140
*SGC_0133-0142 02.3.16 5:07 PM Page 138 Interface Processor Others BKSI-2042 IDC Serial I/F Connector Board The BKSI-2042 IDC serial interface connector board is used in conjunction with a BKSI-2040 IDC CPU board configured as a serial device controller (sub-IDC board). The BKSI-2042 provides up to six simultaneous RS-232C or RS-422A control connections, on D-sub 9-pin connectors, between the SIU-80 interface unit and remote devices.
PAGE 141
*SGC_0133-0142 02.3.16 5:07 PM Page 139 Interface Processor Others BKSI-2044 IDC S-BUS/VS-BUS I/F Connector Board The BKSI-2044 IDC S-BUS/VS-BUS interface connector board is used in conjunction with a BKSI-2040 IDC CPU board configured as an S-BUS or VS-BUS device controller (sub-IDC board). The BKSI-2044 has two sets of BNC connections, which provide the interface between the SIU-80 interface unit and the remote devices, such as routers or video servers.
PAGE 142
*SGC_0133-0142 02.3.16 5:07 PM Page 140 Interface Processor Others BKSI-2080 Audio D to A Converter Board The BKSI-2080 audio D to A converter board accepts three AES/EBU digital audio signals and converts them into six analog audio signals. Individual output level controls are provided internally. The AES/EBU input connectors are BNC type, the analog output signals are via XLR type connectors.
PAGE 143
*SGC_0133-0142 02.3.16 5:07 PM Page 141 Interface Processor Others AMS-100 Audio Monitor Speaker Features *Analog/digital input capability; inputs are configured with optional modules, the BKAM-101 (Analog), the BKAM-102 (AES/EBU), and BKAM-103 (SDI with embedded audio). Up to two modules are installed in the AMS-100.
PAGE 144
*SGC_0133-0142 02.3.
PAGE 145
*SGC_0143-0144 02.3.16 5:08 PM Page 143 PRODUCT INDEX GENERAL INDEX AMS-100 . . . . . . . . . . . . . .141 B BKPF-012A . . . . . . . . . . . .122 BKPF-021 . . . . . . . . . . . . .124 BKPF-205 . . . . . . . . . . . . .125 BKPF-206 . . . . . . . . . . . . .127 BKPF-300 . . . . . . . . . . . . .129 BKPF-301 . . . . . . . . . . . . .130 BKPF-350 . . . . . . . . . . . . .131 BKPF-351 . . . . . . . . . . . . .132 BKPF-L601C . . . . . . . . . . . .71 BKPF-L602C . . . . . . . . . . . .72 BKPF-L603 . . . . . . .
PAGE 146
*SGC_0143-0144 02.3.16 5:08 PM Page 144 PRODUCT INDEX CATEGORY INDEX Cables ECD-10C . . . ECD-30C . . . ECD-3C . . . . ECD-C cables RCC-5R . . . . RCC-R cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 .40 .40 .40 .40 .40 Common Accessories RMM-30 . . . . . . . . . . . . . . .42 Interface Processor D Series PRODUCT INDEX BKPF-012A . . BKPF-021 . . . BKPF-205 . . . BKPF-206 . . . BKPF-300 . . . BKPF-301 . . .
PAGE 147
*SGC_0145-0161 02.3.19 5:37 PM Page 145 Technical References Routing Switchers . . . . . . . . 146 ISR . . . . . . . . . . . . . . . . . . . 158 EDH . . . . . . . . . . . . . . . . . .
PAGE 148
*SGC_0145-0161 02.3.19 5:37 PM Page 146 Technical References Routing Switchers Introduction to the Sony Signal Routing System The Sony routing system on a complete range of flexible, modular, signal routing matrixes. It interfaces to other routing equipment, production and presentation switchers, tally and UMD systems to from multi-signal switching systems.
PAGE 149
*SGC_0145-0161 02.3.
PAGE 150
*SGC_0145-0161 02.3.19 5:37 PM Page 148 Technical References Integrated Systems A key element of Sony routing systems is their ability to provide an integrated solution for the user. Sony routing systems can be interfaced to Sony MVS-8000 Series/DVS-7000 Series production switchers. With the high level of integration available, destinations fed from the router to the switcher can be controlled, so that the production switcher is effectively expanded to be able to accommodate all the available sources.
PAGE 151
*SGC_0145-0161 02.3.19 5:37 PM Page 149 Technical References S-BUS System Components and Control PC WITH BZR-2000 ROUTING SWITCHER SETUP SOFTWARE TO OTHER SYSTEM COMPONENTS S-BUS DISTRIBUTION BOARD BKPF-L803 PC TERMINAL S-BUS MAX. NUMBER OF UNITS CONNECTED-253 MAX.
PAGE 152
*SGC_0145-0161 02.3.19 5:37 PM Page 150 Technical References Powerful Matrix Control Functions of Sony HDS-X5800/X3000 Series The introduction of the Sony multi bit-rate routing switchers has become an effective way of solving the problems caused by the rapid increase in the number of signal formats.
PAGE 153
*SGC_0145-0161 02.3.19 5:37 PM Page 151 Technical References Input/output system protection functions (protect and secret functions) There are two protection functions: “Protect” function prevents the output destination from being re-assigned from another remote control panel. “Secret” function ‘hides’ the input sources that cannot be selected to any destination from any remote control panel.
PAGE 154
*SGC_0145-0161 02.3.19 5:37 PM Page 152 Technical References Name setting function Names can be set for Sources and Destinations in order to identify the signals connected. The following two methods are available for setting names. (1) “Type name (VTR, CAM, etc.) + Number”: 32 names each comprising up to four letters and three numbers. (2) “Descriptive name (REPORT_FROM_LA, etc)”: Name made of up to 16 Latin alphanumeric characters.
PAGE 155
*SGC_0145-0161 02.3.19 5:37 PM Page 153 Technical References Virtual mapping function This function lays out routing switcher crosspoints on a virtual matrix of 1024 inputs x 1024 outputs when eight levels are used or 1024 inputs x 512 outputs when 16 levels are used. The virtual mapping capability of Sony routing switchers features two types of mapping: (1) A single routing switcher can be mapped to operate as a number of individual routing switchers.
PAGE 156
*SGC_0145-0161 02.3.19 5:37 PM Page 154 Technical References Main Features of the HDS-X5800/X3000 Series Support for multiple bit rates independent of signal format These switches support not only HD SDI, but also various other transmission rates of SDI (540 Mb/s, 360 Mb/s, 270 Mb/s and 143 Mb/s) and SDTI (Table 1), and support embedded AES/EBU Audio. Both HD-SDI and SD-SDI I/O boards can be simultaneously installed, providing a real opportunity to meet tomorrow’s routing requirements.
PAGE 157
*SGC_0145-0161 02.3.
PAGE 158
*SGC_0145-0161 02.3.19 5:37 PM Page 156 Technical References Affinity with and expandability in current broadcast and production environments. HDS-X5800/X3000 Series routing switchers are easily installed into today’s system environments, providing: (1) Tri-level sync and black burst sync input (2) 59.
PAGE 159
*SGC_0145-0161 02.3.
PAGE 160
*SGC_0145-0161 02.3.19 5:37 PM Page 158 Technical References Technical References: ISR ISR—Interactive Status Reporting Television broadcast and production systems become ever more complex and the ability to monitor equipment ever more important – but at the same time increasingly difficult. Equipment downtime can have a dramatic effect on revenue, so knowledge of potential equipment failure is of great value.
PAGE 161
*SGC_0145-0161 02.3.
PAGE 162
*SGC_0145-0161 02.3.19 5:37 PM Page 160 Technical References Technical References: EDH EDH – Error Detection and Handling The need for EDH Video installations never get any simpler. In fact, the growth in viewer expectations of seeing what they want when they want, has resulted in a huge, world wide expansion in systems devoted to the switching and routing of video signals. Continuous quality monitoring of every signal path is, in many cases, impractical.
PAGE 163
*SGC_0145-0161 02.3.19 5:37 PM Page 161 Technical References Error reporting Errors are reported in five different ways: • Error detected here, edh • Error detected already, eda • Unknown error status, ues • Internal error detected here, idh • Internal error detected already, ida The last two reports, idh and ida, are used when a piece of equipment has the capability to check for data corruption between its input and output.
PAGE 164
©2002 Sony Corporation. All rights reserved. Reproduction in whole or in part without written permission of Sny is prohibited. Features and specifications subject to change without notice. All non-metric weights and measures are approximate. Sony is a registered trademark of Sony Corporation. Betacam and Betacam SP are trademarks of Sony Corporation. Belden is a registered trademark of Cooper Industries. All other trademarks are the properties of their respective owners.