Operation Manual

MHC-EC68USB.GB.3-294-664-11(1)
23
GB
Other Operations
Other Operations
Creating your own
program
(Program Play)
Use buttons on the remote to create your
own program.
1 Select the desired function.
CD
Press CD

to select the CD
function.
USB
Press USB

to select the USB
function.
2 Press PLAY MODE

repeatedly
until “PGM” appears while the
system is stopped.
3 Press DISC SKIP

repeatedly to
select a disc.
4 Press /

repeatedly
until the desired track or le
number appears.
When programming MP3 les, press
+/

repeatedly to select the
desired folder, and then select the
desired le.
Selected track or le number
Total playing time of the selected track
5 Press ENTER

to add the track
or le to the program.
CD
“ . ” appears when the total
program time exceeds 100 minutes
for a CD or when you select an MP3
le.
USB
e total program time cannot be
displayed, so “ . ” appears.
6 Repeat steps 3 through 5 to
program additional tracks or
les, up to a total of 25 tracks or
les.
7 To play your program of tracks
or les, press 

.
e program remains available until
you open the disc tray or remove
the USB device. To play the same
program again, press 

.
To cancel Program Play
Press PLAY MODE

repeatedly until
“PGM” disappears while the system is
stopped.
To delete the last track or le of the
program
Press CLEAR

while the system is
stopped.
To view program information, such as
total track number of the program
Press DISPLAY

repeatedly.