Operation Manual

MHC-EC68USB.GB.3-294-664-11(1)
20
GB
 Folders that have no MP3 les are skipped.
 e system can only play MP3 les that have
a le extension of “.mp3.”
 If there are les on the USB device that have
the “.mp3” le extension, but that are not
MP3 les, the unit may produce noise or may
malfunction.
 Up to 999 MP3 les or 997 folders can be
contained on a single USB device.
e maximum number of MP3 les and
folders may vary depending on the MP3 le
and folder structure.
 Compatibility with all MP3 encoding/writing
sowares, recording devices, and recording
media cannot be guaranteed. Incompatible
USB device may produce noise or interrupted
audio or may not play at all.
Using optional audio
components
1 Connect additional audio
component to the AUDIO
INPUT jack

on the unit using
an analog audio cord (not
supplied).
2 Turn down the volume.
Press VOLUME 

.
3 Select the AUDIO IN function.
Press FUNCTION

repeatedly until
“AUDIO IN” appears.
4 Start playing the connected
component.
5 Adjust the volume.
Press VOLUME +/

.
To connect an optional headphones
Connect headphones to the PHONES
jack

on the unit.