Operating Instructions

45
Resetting all settings
All settings in visual setup can be reset.
Select (RESET), then “RESET ALL
SETTINGS,” “YES” using / and
.
For details on this procedure, see “Basic
operation of visual setup” on page 41.
Note
Do not power off the unit while resetting, as it
takes a few seconds to complete.
System setup
The system setup menu includes the
following categories.
• SET: General settings (page 46)
• DSPL: Display settings (page 47)
• P/M: Play mode settings (page 48)
• R/M: Receive mode settings (page 48)
• SND: Sound settings (page 49)
Basic operation of system
setup
You can set items in the menu by the
following procedure.
E.g., when setting the demonstration.
1 Press  while the unit
is off.
The system setup item appears on the
main unit.
2 Press / to select “DEMO,” then
press .
The option appears.
3 Press / to select “ON” or “OFF,”
then .
The setting is complete.
To hide the system setup display, press
.
With the main unit
Press and hold the control dial instead of pressing
, rotate the control dial
instead of pressing /, press the control dial
instead of .
Follow the page reference for details. “”
indicates the default setting.