Operating Instructions
Table Of Contents
- US
- Getting Started
- Location of controls
- Radio
- CD
- USB devices
- iPod
- Pandora® internet radio via USB (iPhone)
- Searching and playing tracks
- Changing the illumination
- Connecting Bluetooth devices
- Pandora® internet radio via Bluetooth wireless technology (Android™ & BlackBerry® phones)
- Sound Settings and Setup Menu
- Using optional equipment
- Additional Information
- FR
- Préparation
- Emplacement des commandes
- Radio
- CD
- Périphériques USB
- iPod
- Radio Internet Pandora® via USB (iPhone)
- Recherche et lecture des plages
- Modification de l’illumination
- Connexion de périphériques Bluetooth
- Radio Internet Pandora® via la technologie Bluetooth sans fil (téléphones Android™ et BlackBerry®)
- Réglages du son et menu de configuration
- Utilisation d’un équipement en option
- Informations complémentaires
24
2 Turn on the cellular phone and activate
the Bluetooth signal.
3 Connect to this unit using the cellular
phone.
“ ” appears when the connection is
made. If you select the Bluetooth Phone
source after the connection is made, the
network name and the connected
cellular phone name appear in the
display.
Icons in the display:
* Turns off without handsfree connection.
Differs in the case of a cellular phone.
Changing display items
Press .
Connecting the last-connected cellular
phone from this unit
1 Make sure the Bluetooth signal of the
cellular phone is activated.
2 Press repeatedly until “BT
PHONE” appears.
3 Press (handsfree).
“ ” flashes while the connection is
being made, then stays lit while
connected.
Notes
• Some cellular phones require permission to
access their phonebook data during handsfree
connection to this unit. Obtain permission via
the cellular phone.
• While streaming Bluetooth audio, you cannot
connect from this unit to the cellular phone.
Connect from the cellular phone to this unit
instead. A connecting noise may be heard over
playback sound.
Tip
With Bluetooth signal on: when the ignition is
turned to on, this unit reconnects automatically
to the last-connected cellular phone. But
automatic connection also depends on the
cellular phone’s specification. If automatic
connection is not made, connect manually.
Connecting an audio device
1 Press and rotate the control
dial until “SET BT SIGNL” appears,
then press it.
“ ” lights up when Bluetooth signal is
activated.
2 Turn on the audio device and activate
the Bluetooth signal.
3 Connect to this unit using the audio
device.
“ ” appears when the connection is
made.
Connecting the last-connected audio
device from this unit
1 Make sure the Bluetooth signal of the audio
device is activated.
2 Press repeatedly until “BT
AUDIO” appears.
3 Press (PAUSE).
“ ” flashes while the connection is
being made, then stays lit while
connected.
Signal strength status of
connected cellular phone.*
Remaining battery status of
connected cellular phone.*