SONY. FM/AM Mini Disc Player Constructionist's EI Owner's Record The model and serial numbers are located on the bottom of the unit Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product Model No. MD X-C670 Serial No. For installation and connections, see the supplied installation connections annual.
Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide seasonable protection against harmful interference in a residential installation, This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no.
Table of Contents LIE RL Getting Started Resetting the unit Detaching the front panel Preparing the rotary remote Setting the SOCK Player Listening to an MD Playing an MD in various modes Radio Murmuring stations automatically — Best Tuning Memory (BTM) Memorizing only the desired stations Receiving the memorized stations . Storing the station names. — Station Memo. Locating a station by name ~ List up Other Functions Using the rotary remote Adjusting the sound character Muting the sound...
Resetting the unit Before operating the unit for the first time ar after replacing the car battery, you must reset the unit. Press the reset button with a pointed object, such as a ballpoint pen J [E = Reset button Note Pressing the reset button will Erse the clock and nose memorized functions. Detaching the front panel You can detach the front pane! of this unit to prevent the unit from being stolen. 1 press (GFE. 2 press 10 open up the front panel.
Setting the clock The clock has a 12-hour digital indication Example: Set the clock to 10:08 1 press (GHEE, then press (2) (SET UP). Clock © Press (3 Set =i. ee 231390 The hottie diet flashes. © Set the hour. 0 go backward to-GE forward © Press (+ Set ed be Mn LIES} “The minute digits flash. © Set the minute. t0 go backward to 90 forward 2 Press (SHED). _ sees The clock starts. 3 press (SHED), When the mode setting is complete, the normal playback mode appears.
Changing the displayed items Each time you press (GB, the em changes as follows: rd Elapsed playback time + Disc name! Track name* Clock 1 if there is no prerecorded title for a doss “NO D. Nan” will appear on the display. if a track rite is sof prerecorded, “NO T.Name” will be disposed.
3 Press (3) to select "Intro on.” Playback starts. 4 press (SEED. To go back to the normal playback mode, select “Intro off” in step 3 above. Playing tracks repeatedly — Repeat Play 1 During playback, press (SET). 2 Press (6) (REP) repeatedly until “Repeat 1” appears. Repeat play starts. 3 press (HPD. To go back to the normal playback mode, select “Repeat off” in step 2 above, Playing tracks in random order ~ Shuffle Play 1 During playback, press (SHIFT). 2 Press (SHUN) repeatedly until “Shut 1° appears.
1 Memorizing only the desired stations You can store up to 10 stations on each band £20 for FMT and FM2, 10 for AM} in the order of your choice. 1 egress (SOURCE repeatedly to select the niter. 2 Press (MEGO repeatedly to select the band (FM1, FM2 or AM). 3 Press either side of (SEE RAMS) to tune in the station that you want to store on the number button. 4 press the desired number button for two seconds until “MEM” appears. The number button indication appears in the display.
Storing the station names —Station Memo You can assign a name to each radio station and stare it in memory. The name of the current station appears in the display. You can stare up to eight characters for each station Storing the station names 1 Tune in a station whose name you want to store. 2 Press (TET) for twa seconds. FHT ie 3 Enter the characters.
Using the rotary remote The rotary remote works by pressing buttons and/or rotating controls. You can control the optional CD or MD changer with the rotary remote, By pressing the button (the (SURGE Every time you press (SOURCE), the source changes as folios Tuner Pressing changes the operation in the following ways: + Tuner: FM1 — FM2 than get: changer: MDT — MD2 — Tip Whiten the POWER SELECT switch is set io position ©, ou can uri on This unit by pressing (SOURCE) on the rotary remote.
1 you need to mount the rotary remote on the right side of the steering column, you can reverse the controls operative direction. 5 Press two seconds while pushing the VOL control. Tip You cart contra Hse operative direction of controls with the ani. Adjusting the sound characteristics You can adjust bass, treble, balance and fared. Each source can store the bass and treble levels respectively. 1 Select the item you want to adjust by pressing (SOUNDS repeatedly.
You can control changers and MD changers with this unit. 1f you connect an optional CD changer with the CD-TEXT function, the CD-TEXT information will appear in the display when you play back a CD-TEXT disc. Playing Press (SOURCES repeatedly ta select the press until the desired changer appears. CD/MD playback starts. When changer is connected, all the tracks play from the beginning.
Locating a disc by disc number — Direct Disc Selection Press the number button that corresponds with the desired disc number. The desired disc in the currently selected changer begins playback. Scanning the tracks ~ Intro Scan You can play the first 10 seconds of all the tracks on the currently selected disc. 1 During playback, press (SHED, then press (5) {PLAY MODE) repeatedly until “intro” appears, 2 Press (@ to select "Intro on.” Intro Scan starts. 3 Press (SHEET).
If you rotate the dial in a counterclockwise direction, the characters appear in the reverse order H you want to put a blank space between characters, select“ {underwear. © Press (2D) after locating the desired character. The flashing cursor moves to the next 1 you press (1) the flashing cursor moves to the left © Repeat steps € and € to enter the entire name. 3 To return to the normal CD playback. mode, press (LIST) for two seconds.” Tip To correctness a manic enter *_ character.
Locating a disc by name ~~ List-up (CD changer with custom file function or MD changer) You can use this function for the discs that have been assigned a custom name. For mare information on disc names, refer to “Label Press (TST) momentarily. The name assigned to the disc currently playing appears in the display. STF Schubert If you add disc memo fables to a CD-TEXT disc, the display setting you make will determine which information is displayed.
Precautions * If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to coal off before operating power is being supplied to the unit, check the connections first. I everything is in order, check the fuse. * If no sound comes from the speakers of two-speaker systems, set the fared control to the center position.
TR Maintenance Fuse replacement When replacing the fuse, be sues to use one that matches the amperage described on the fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. Fuse (10 A} Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit.
Location of controls taiga bs Refer to the pages for details. [1] SEAMS (seek/Automatic Music Sensor/manual search} button 6.8, 12, 15 [2] SOUND button 11 MODE (band/changer select) button 7, 8,12, 14 [4] OFF buttons 4,5 {5] Dial (volumerbassitreble/balance/fader control} 5,9, 11,13, 14 [8] Display window [7] & (eject) button § SPLIT {display mode change) button 6.
Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION 15 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from kHz with no more than 1 % total harmonic distortion. Other specifications MD player section Signal-to noise ratio 90 dB Frequency response 1020,000 Hz Woe and flutter Laser Diode Properties Material Ga Alas Wavelength 780 nm Emission Duration Continuous Laser output power Lass than 34.
EEE e—— Troubleshooting guide The following checklist will help you remedy the problems that you may encounter with your unit. Buford going through the checklist below, check the connection and operating procedures, General Problem Cause/Solution No sound + Cancel the MUTE function The contents of the memory have been erased. Indications do not appear in the display. No beep tone DMD playback Problem A disc cannot be loaded. Play does not begin. A disc is automatically ejected.
Error displays (when the optional CD/MD changer is connected) The following indications will flash for about five seconds, snd an alarm sound will be heard. Display NO Mag NO Disc NG Discs Cause The disc magazine is not deserted in the CD/MIJ changer. No disc is inserted in the CD/MD changer. A CD/MD cans play because of some problem. Solution Insert the disc in the CD/MD changer. insert the discs in the CO/MED changer Insert another CD/ MD, Error” ACD is dirty or inserted upside down.
TR Ind: A Automatic Music § Automatic tuning: Alta Scroll 6, 12 8 Balance 11 Bank Play 15 Bass 11 Beep tone 11 Best Tuning Memory (BTM) 7 C Caution alarm 4 CD playback 12 Clock 5 D.E = Dimmer 11 Direct disc selection 13 Disc Memo 13 Display 14 Dual information 11 F.G.H Wader 11 Front panel 4 Fuse 17 LLK Rumination color 11 Intro Scan 6,13 L List up 9,15 Local seek & Locating disc 13,15 a specific point 6, 12 specific track 6,12 a station ¢ Loudness 11 or (AMS) 22 612 M,N.
