User guide

4-172-207-11(1)

MDR-NC300D

English

Notes on installing the battery

1 Insert an AA/LR6 dry battery,  end first.

Insert the battery until the blue internal stopper holds the battery.

OPEN

LOCK

Unlock

Lock





Note

Make sure to insert the battery  end first. If you fail to do so, it may cause heat

buildup or a fault.

2 Close and lock the battery compartment lid.

Close the battery compartment lid and set fully to the “LOCK” position.

OPEN

LOCK





LOCK

OPEN

LOCK

OPEN



PAGE 1
MDR-NC300D English Notes on installing the battery N E LO C K Insert an AA/LR6 dry battery,  end first. Insert the battery until the blue internal stopper holds the battery. O P 1  Unlock  Lock Note 2 Make sure to insert the battery  end first. If you fail to do so, it may cause heat buildup or a fault. Close and lock the battery compartment lid. Close the battery compartment lid and set fully to the “LOCK” position.
PAGE 2
Español Notas sobre la colocación de la pila N E LO C K Inserte una pila seca AA/LR6, el extremo  primero. Inserte la pila hasta que quede sujeta con el tope interno azul. O P 1  Desbloquear Bloquear  Nota 2 Asegúrese de insertar la pila con el extremo  primero. De no hacerlo, puede provocar un sobrecalentamiento o un fallo. Cierre y bloquee la tapa del compartimiento de la pila. Cierre la tapa del compartimiento de la pila y colóquela completamente en la posición “LOCK”.