This warranty is valid only in the United States. SONY. LIMITED WARRANTY Som Cato oT wae Pe chis Soe Sr i 0 hens MTS ati Soto chr cover ty omen ru pes sro chi aon nie of rose 4 HIP SO EH. Ti san he one Cpe slain, eon, ek U0 RET wage on cof Got ice, ion, wna, icon, SONY Operating Instructions M-100MC Sony Corporation € 1996 Printed in China For the customers in the U.S.A. Owner's Record ‘The model number is located at the bottom and the serial number is located inside the cassette holder.
Lo Preparing Power Sources Choose one of the following power sources. Dry Batteries Make sure that nothing is connected to the DC IN 3V jack 1 Open the battery compartment lid 2 Insert two R6 (size AA) batteries with correct polarity and close the lid. To take out the batteries To attach the battery compartment lid, if it is accidentally detached Attach it as illustrated. When to replace the batteries Replace the batteries with new ones when the BAT indicators go off and the 0 indicator flashes.
Recording TAPE SPEED REC indicator/ VOR (rear) CUE MARKER @ Microphone MIC MODE ~~ TAPE COUNTER 1 Press the reset button of the TAPE COUNTER. Press M 4I and insert a standard micro cassette with the side to start recording facing the lid. 3 Select the desired tape sped. 2.4¢m for optimum sound {recommended for normal use): A 30-minute recording can be made using both sides of the MC-30 micro cassette. : 1.
Recording cue marks While recording, you can record a special signal on the tape to mark a specific position. At the desired position, push CUE MARKER to record a signal. The REC indicator goes off for a while and a signal sill be recorded on the tape. If you want to record a signal longer than that, push CUE MARKER as long as you want. During cue and review, you will hear the beep sound at the signal position. During playback, you will hear the signal with low frequency. .
A Precautions On power * Operate the unit only For AC operation, use the AC adapter recommended for the unit. Do not use any other type. For battery operation, use two RE (size AA) batteries. On the unit * Use only the (SOMERSETTED” (standard micro cassettes) with this unit. Nonstandard cassettes cannot be used because their “L" dimension (see illustration) is different. Standard Non-standard Only standard micro cassettes have a slam} indention of side Lot 4 Approx. 5 mm Approx.
Maintenance Pinch roofer To clean the tape head and path Press W= and wipe the head, capstan and the pinch roller with a cotton swab, moistened with alcohol every 10 hours of use, To clean the exterior Use a soft cloth slightly moistened in water. Bo not use alcohol, benzine or thinner. Fo Specifications Tape CURRIES" (normal position type} Recording system track 1-channel monaural Speaker Approx. dia.
