S ON'Y Cassette-Order Operating Instructions Owner's Record The model number is Located #t the bottom and the serial number is located inside the tape holder, Record the serial number in the space provided below. Refer to whenever you call pen your Sony dealer regarding this product Model No. M-950 Serial No., M-950 21897 by Bony Corporation.
Shes e A L Welcome! Thank you for purchasing the Sony Micro cassette-Corder. Some features are: * Super-mini size Micro cassette-Carder with automatic reverse function and feather-touch buttons. * Supplied detachable speaker. « LCD {Liquid Crystal Display) that shows tape counter, remaining battery power and tape transport direction. «Zero stop counter that stops the tape autocratically at 000 in rewind and review mode.
» Getting Started Preparing a Power Source Choose one of the following power sources. Dry Batteries Make sure that nothing is connected to the CINDY 1.5V jack. For the main unit 1 Slide OPEN on the battery compartment in the direction of the arrow to open the battery compartment lid. 2 Insert one size AAA (RD3} battery (not supplied) with correct polarity Note Make sure that the battery is inserted with correct polarity.
AC-E15HG AC power adapter {not supplied) DIN 1.5V Note Use the AC-EIGHTH AC power adapter. Do not use any other AC power adapter, Polarity of the pig Releasing HOLD Unlock the unit before operating by sliding HOLD in the apposite direction of the arrow. 1 1 Attach the speaker unit to the main unit, 2 Side the speaker unit as illustrated until it clicks.
§ Yo prevent a tape from being accidentally recorded over Break out and remove the cassette tabs. To reuse the cassette for retarding, covet the tab hole with adhesive tape. ST Playing a Tape W STOP -~ PLAY/DIR SUFFICE Display window REVIEWER. 11 PAUSE 7 VOLUME 1 Slide OPEN on the cassette compartment in the direction of the arrow and open the lid. 2 Take out any slack in the tape and insert the cassette with the side to start playing facing the lid. 3 Close the cassette compartment lid unit] it clicks.
Using Various Functions Display window RECORD PROTECT EAR/ MIC ® REC HOLD To select the side to be recorded To record on both sides continuously 1 Inserts cassette with the side to start recording facing the lid 2 Start recording on the upper side (@ FWI) appears in the display window). If REV W is displayed, press # STOP for more than 2 secants to display = FAD.
To check the direction of the tape in the display window 4 FWD appears when recording on the nipper side REV W appears when recording on the reverse side. The indication will disappear about ane minute after the tape starts running, To display the indication, press B STOP Display during Side of the tape during recarding/playback recording/playback Upper side 00 earwax Reverse side o003 __see TAPE SPEED selector 2.4 cm: For optimum sound (recommended for normal use).
Recording is interrupted. # The VOR system is working. When you do not use VOR, press it to make VOR L or VOR H disappear from the display window, Recording cannot be erased completely. % The erase head is contaminated. Maintenance You can see the inside through the window of the cassette compartment lid. Recompilation/ erase head P Finch-rofier| Capstan Cotton swab To clean the tape heads and path Wipe the heads, pinch roller, and the capstan with a cation swab moistened with alcohol every 10 hours of use.
