4-194-402-14(1) LCD Monitor Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference.
Owner’s Record The model and serial numbers are located at the rear. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. ____________________ Serial No.____________________ Important Safety Instructions • • • • • • • • • • • • • • Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth.
Attention-when the product is installed in Rack: 1. Prevention against overloading of branch circuit When this product is installed in a rack and is supplied power from an outlet on the rack, please make sure that the rack does not overload the supply circuit. 2. Providing protective earth When this product is installed in a rack and is supplied power from an outlet on the rack, please confirm that the outlet is provided with a suitable protective earth connection. 3.
Table of Contents Precaution .............................................................. 5 On Safety ............................................................ 5 On Installation .................................................... 5 Handling the LCD Screen .................................. 5 On Burn-in ......................................................... 5 On a Long Period of Use .................................... 5 On Cleaning .......................................................
Precaution On Safety • Operate the unit only with a power source as specified in the “Specifications” section. • A nameplate indicating operating voltage, etc., is located on the rear panel. • Should any solid object or liquid fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further. • Do not drop or place heavy objects on the power cord. If the power cord is damaged, turn off the power immediately.
On Cleaning On Mounting on a Rack Before cleaning Be sure to disconnect the AC power cord from the AC outlet. Leave 1U space empty above and below the monitor to ensure adequate air circulation or install a fan to maintain the monitor’s performance. On cleaning the monitor screen The monitor screen surface is especially treated to reduce reflection of light.
Features The LMD-2110W (21.5-type) is a multiple format LCD monitor for broadcast/professional use featuring a precise image and high performance. Supporting digital/ analog main broadcast signals, and HDMI1) input, it can be used under various lighting conditions. 1) The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Location and Function of Parts and Controls Front Panel 1 MENU LINE RGB/ HDMI COMPONENT SDI EXT SYNC BLUE ONLY SCAN ASPECT qd qs qa 0 9 8 7 6 VOLUME 1 KEY INHIBIT ENTER RESET 5 4 3 2 qf a Tally lamp You can check the status of the monitor by the color of the tally lamp. The tally lamp lights in red, green or amber according to the setting of the REMOTE menu. b 1 (standby) switch and indicator Press to turn on the power when this unit is in standby mode. The indicator turns on.
m LINE button Press to monitor the signal through the LINE input connector. n Speaker The audio signal selected by the input select button (j SDI button, k RGB/COMPONENT button, l HDMI button or m LINE button) on the front panel is output.
Rear Panel 9 8 LINE IN 7 6 5 4 32 PARALLEL REMOTE RGB/COMPONENT IN OUT G/Y IN OPTION OUT 1 AUDIO IN OPTION IN IN IN a HDMI IN connector HDMI (High-Definition Multimedia Interface) is an interface that supports both video and audio on a single digital connection, allowing you to enjoy high quality digital picture and sound. The HDMI specification supports HDCP (High-bandwidth Digital Content Protection), a copy protection technology that incorporates coding technology for digital video signals.
audio input/output jacks on equipment such as a VCR. g PARALLEL REMOTE connector (modular connector, 8-pin) Forms a parallel switch and controls the monitor externally. Installing to the Rack 1 Remove the screws (4) to remove the stand. 2 Attach the unit to the rack using the mounting bracket. For details on the pin assignment and factory setting function assigned to each pin, see page 23.
Connecting the AC Power Cord Attaching the Input Adaptor 1 Before attaching the input adaptor, disconnect the power cord. Plug the AC power cord into the AC IN socket on the rear panel. Then, attach the AC plug holder (supplied) to the AC power cord. BKM-320D AC IN socket Tighten the screws. LINE IN IN VIDEO OUT AUDIO OUT BKM-341HS AC power cord Tighten the screws. AC plug holder (Supplied) 2 Slide the AC plug holder over the cord until it locks.
Selecting the Default Settings When you turn on the unit for the first time after purchasing it, select the area where you intend to use this unit from among the options. The default setting values for each area MENU VOLUME KEY INHIBIT 1 ENTER RESET 3 5 1 4 3 2~3 1 1 Press the 1 (standby) switch. The power is turned on and the SELECT SETTING screen appears. 2 3 1 North America 1NORTH AMERICA 2LATIN AMERICA ARGENTINA COLOR TEMP COMPONENT LEVEL NTSC SETUP LOW BETA7.5 7.
2 If LATIN AMERICA is selected: PAL&PAL-N area L A T I N AMER I CA PA L &PA L - N_ AREA ARGEN T I NA P ARAGUA Y URUGUA Y NTSC&PA L - M AREA OTHER AREA Selecting the Menu Language Argentina Paraguay Uruguay NTSC&PAL-M area Other area You can select one of seven languages (English, French, German, Spanish, Italian, Japanese, Chinese) for displaying the menu and other on-screen displays. “ENGLISH (English)” is selected in the default setting.
The setting items (icons) in the selected menu are displayed in yellow. Using the Menu USER CONFIG – SYSTEM SETTING 1/2 RGB/COMP SEL: COMPONENT LEVEL: NTSC SETUP: SCAN: GAMMA: F O R M AT D I S P L AY: L A N G UAG E : BACKGROUND: I/P MODE: 4 xxxxxxx xxxxxxx xxxxxxx xxxxxxx xxxxxxx xxxxxxx xxENGLISH xxxxxxx xxxxxxx Press the M or m button to select “LANGUAGE,” then press the , or ENTER button.
USER CONFIG – SYSTEM SETTING 1/2 RGB/COMP SEL: COMPONENT LEVEL: NTSC SETUP: SCAN: GAMMA: F O R M AT D I S P L AY: L A N G UAG E : BACKGROUND: I/P MODE: 3 xxx xxxxx x xxxxxx xx xx ENGLISH xx x Items The screen menu of this monitor consists of the following items. Select an item. Press the M or m button to select the item, then press the , or ENTER button. The item to be changed is displayed in yellow. Note If the menu consists of multiple pages, press M or m button to go to the desired menu page.
For the DVI input MARKER SELECT CENTER MARKER SAFETY AREA MARKER LEVEL STATUS 1/2 xxx xxxxxxx xxxxxxx xxxxx xxxx F O R M AT fH fV COLOR TEMP REMOTE PARALLEL REMOTE 1PIN 2PIN 3PIN 4PIN 6PIN 7PIN 8PIN STATUS 2/2 LMD-2110W xxxxxxx OPTION BKM-320D KEY INHIBIT KEY INHIBIT Adjusting and Changing the Settings STATUS menu The STATUS menu is used to display the current status of the unit.
USER CONFIG menu Submenu Setting MANUAL ADJUSTMENT If you set the COLOR TEMP to USER setting, the item displayed is changed from black to white, which means you can adjust the color temperature. • ADJUST GAIN: Adjusts the color balance (GAIN). • ADJUST BIAS: Adjusts the color balance (BIAS). • COPY FROM: If you select HIGH or LOW, the white balance data for the selected color temperature will be copied in the USER setting. The USER CONFIG menu is used for setting the system and marker.
Submenu Setting Submenu Setting SCAN Sets the scan size of the picture. Select from OFF and FULL. The display format changes depending on the mode selected. (See “Scan mode image” on page 20) • OFF: Changes between over scan and normal scan. • FULL: Changes to over scan, normal scan or full screen. SD PIXEL MAPPING GAMMA Select the appropriate gamma mode. You can select from among five settings. When "3" is selected, the setting is roughly same as the gamma mode of the CRT (2.2).
Scan mode image Submenu Setting CENTER MARKER Select ON to display the center mark of the picture and OFF not to display. SAFETY AREA Selects the safe area size for the aspect ratio determined by the button which the aspect function is assigned. You can select from among OFF, 80%, 85%, 88%, 90% and 93%. When the marker is displayed, the safe area for the marker is displayed. MARKER LEVEL Sets the luminance to display the MARKER SELECT, CENTER MARKER and SAFETY AREA.
• SDI If you use the PARALLEL REMOTE function, you need to connect cables. For more details, see page 23. KEY INHIBIT menu KEY INHIBIT KEY INHIBIT: xx Troubleshooting This section may help you isolate the cause of a problem and as a result, eliminate the need to contact technical support. • The display is colored in green or purple t Select the correct input from the RGB/COMP SEL setting in the USER CONFIG menu (page 18). • The unit cannot be operated t The key protection function works.
a-Si TFT Active Matrix 21.
HD/SD-SDI input adaptor BKM341HS Design and specifications are subject to change without notice. Note Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
Video signal formats The unit is applicable to the following signal formats. System Total lines Active lines Frame rate Scanning format Aspect ratio Signal standard 625 575 25 2:1 interlace 16:9/4:3 EBU N10 (PAL: ITU-R BT.624) 525 483 30 2:1 interlace 16:9/4:3 SMPTE 253M (NTSC: SMPTE 170M) 625 576 50 Progressive 16:9/4:3 ITU-R BT.
Side Dimensions 75.2(3) 86.3(3 1/2) Front 2.5 ( 1 / 8 ) 67.7 (2 3/4) 192.9 (7 5 / 8 ) 238.2 (9 1 / 2 ) 162.1 (6 1 / 2 ) 515 ( 20 3 / 8 ) 96.8 (3 7/8) 264.4(10 1/2) Bottom 204.3(8 1/8) 4-M5 76.2(3) Rear 114.6 (4 5/8) 100(4) 100(4) 165.1(6 1/2) 38.4(1 9/16) 216.4(8 5/8) Unit: mm (inches) Mass: Approx. 8.
Sony Corporation
