documents.type.
Table Of Contents
- Introducing the Sony Projection TV
- Installing and Connecting the Projection TV
- Contents
- Inserting Batteries into the Remote Control
- Carrying Your Projection TV
- Installing the Projection TV
- Connector Types
- Projection TV Controls and Connectors
- Basic Connections (Connecting Cable TV or Antenna)
- Connecting a VCR and Cable
- Connecting a VCR and Cable Box
- Connecting Two VCRs for Tape Editing
- Connecting a Satellite Receiver
- Connecting a Satellite Receiver with a VCR
- Connecting an Audio Receiver
- Connecting a DVD Player with Component Video Connectors
- Connecting a DVD Player with A/V Connectors
- Connecting a Digital TV Receiver
- Connecting a Camcorder
- Connecting an AV Receiver
- Using the CONTROL S Feature
- Setting Up the Projection TV Automatically
- Adjusting the Convergence Automatically – FLASH FOCUS™ –
- Adjusting the Convergence Manually
- Using the Features
- Using the Menus
- Other Information
Other Information
77
Other Information
Model name1[KP-46WT510] Model name2[KP-51WS510] Model name3[KP-57WS510] Model name4[KP-65WS510]
[4-094-605-12]
You get the same program in the
window picture as in the main
picture
❏ Both may be set to the same channel. Try changing channels in either the main
picture or the window picture.
❏ You may be running all your channels through a cable box. The cable box will
only unscramble one signal at a time, so you cannot use the Twin View feature. If
possible, run a direct cable to your projection TV’s VHF/UHF input (this will only
work if your cable system provides an unscrambled signal.)
You cannot get anything but TV
channels in your second picture
❏ Be sure the video label has not been set to skip your video inputs. See the Setup
menu on page 60.
Favorite Channel does not
display your choices
❏ Verify that Favorite Channel is set to Manual in the Channel menu (see
“Favorite Channel” on page 55).
Some video sources do not
appear when you press TV/
VIDEO
❏ Ensure that Video Label is not set to SKIP (see “Video Label” on page 61).
Digital cable box does not
work
❏ Be sure that you have not connected the digital cable box to the TV's TO
CONVERTER jack. This jack is not compatible with digital cable boxes.
❏ If you are connecting a VCR and digital cable box, you must use a special bi-
directional splitter that is designed to work with your digital cable box. Contact
your cable provider for details.
Problem Possible Remedies