documents.type.
Table Of Contents
- Introducing the Sony Projection TV
- Installing and Connecting the Projection TV
- Contents
- Inserting Batteries into the Remote Control
- Carrying Your Projection TV
- Installing the Projection TV
- Connector Types
- Projection TV Controls and Connectors
- Basic Connections (Connecting Cable TV or Antenna)
- Connecting a VCR and Cable
- Connecting a VCR and Cable Box
- Connecting Two VCRs for Tape Editing
- Connecting a Satellite Receiver
- Connecting a Satellite Receiver with a VCR
- Connecting an Audio Receiver
- Connecting a DVD Player with Component Video Connectors
- Connecting a DVD Player with A/V Connectors
- Connecting a Digital TV Receiver
- Connecting a Camcorder
- Connecting an AV Receiver
- Using the CONTROL S Feature
- Setting Up the Projection TV Automatically
- Adjusting the Convergence Automatically – FLASH FOCUS™ –
- Adjusting the Convergence Manually
- Using the Features
- Using the Menus
- Other Information
Installing and Connecting the Projection TV
35
Installing and Connecting the Projection TV
Model name1[KP-46WT510] Model name2[KP-51WS510] Model name3[KP-57WS510] Model name4[KP-65WS510]
[4-094-605-12]
Notes on Adjusting
the Convergence
Manually
❑ For best results, stand about 3 to 5 feet back from the picture when
adjusting the convergence. Begin with the crosses in the center area of
the screen and, once those are adjusted, move to the crosses on the edges
of the screen.
❑ You can make separate adjustments to each wide mode: Full/Normal,
Zoom, Wide Zoom, and 1080i high-definition input. The cross pattern
settings appear different in each wide mode, but the adjustment
procedure is the same. Press the WIDE MODE button on the remote to
toggle through the wide mode screens.