documents.type.
Table Of Contents
- Introducing the Sony Projection TV
- Installing and Connecting the Projection TV
- Contents
- Inserting Batteries into the Remote Control
- Carrying Your Projection TV
- Installing the Projection TV
- Connector Types
- Projection TV Controls and Connectors
- Basic Connections (Connecting Cable TV or Antenna)
- Connecting a VCR and Cable
- Connecting a VCR and Cable Box
- Connecting Two VCRs for Tape Editing
- Connecting a Satellite Receiver
- Connecting a Satellite Receiver with a VCR
- Connecting an Audio Receiver
- Connecting a DVD Player with Component Video Connectors
- Connecting a DVD Player with A/V Connectors
- Connecting a Digital TV Receiver
- Connecting a Camcorder
- Connecting an AV Receiver
- Using the CONTROL S Feature
- Setting Up the Projection TV Automatically
- Adjusting the Convergence Automatically – FLASH FOCUS™ –
- Adjusting the Convergence Manually
- Using the Features
- Using the Menus
- Other Information
Installing and Connecting the Projection TV
21
Installing and Connecting the Projection TV
Model name1[KP-46WT510] Model name2[KP-51WS510] Model name3[KP-57WS510] Model name4[KP-65WS510]
[4-094-605-12]
Coaxial
cable
Cable box
VCR
Rear of projection TV
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
VMC-810S/820S
(not supplied)
Coaxial cable
YC-15V/30V
(not supplied)
S VIDEO
✍ If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow)
instead of the S VIDEO cable.
✍ You will not be able to change channels on the VCR. Set your projection
TV and VCR to channel 3 or 4, depending on your cable box.
✍ Pressing ANT on the remote control switches between the channels
coming in through the cable box (scrambled) and those coming directly
to the projection TV (unscrambled).
✍ If you are connecting a digital cable box, you will need a special
bi-directional splitter designed to work with your cable box.