2-650-915-11(2) LCD Color TV Operating Instructions KLV-S40A10 © 2005 Sony Corporation
Owner’s Record The model and serial numbers are located at the rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. Contacting Sony If, after reading the following instructions, you have additional questions related to the use of your Sony® TV, please call the following number.
WARNING Safety CAUTION To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. s s Use the following Sony appliance only with the following WALL-MOUNT BRACKET.
Trademark Information TruSurround, SRS and the symbol are trademarks of SRS Labs, Inc. TruSurround technology is incorporated under license from SRS Labs, Inc. Licensed by BBE Sound, Inc. under USP4638258, 4482866. “BBE” and BBE symbol are trademarks of BBE Sound, Inc. Macintosh is a trademark licensed to Apple Computer, Inc., registered in the U.S.A and other countries. Wega, Steady Sound and CineMotion are registered trademarks of Sony Corporation.
Important Safeguards s Unplug the AC power cord when cleaning this unit. If not, it may result in electric shock. s Clean the cabinet of the TV with a dry soft cloth. To remove dust from the screen, wipe it gently with a soft cloth. Stubborn stains may be removed with a cloth slightly dampened with a solution of mild soap and warm water. Never use strong solvents such as thinner or benzine for cleaning. If using a chemically pretreated cloth, please follow the instruction provided on the package.
Attachments Do not use attachments not recommended by the manufacturer, as they may cause hazards. Medical institution Do not place this unit in a place where medical equipment is in use. Handling of broken glass and liquid crystal leakage If the LCD panel gets damaged, crystalline liquid leakage may occur, or scattered broken glass may result. Do not touch broken glass or crystalline liquid (which is toxic), with bare hands as cuts or poisoning/ skin irritation may occur.
Optional accessories Observe the following when installing the TV using a wall-mount bracket. If the TV is not secured properly, it may fall and cause injury. s Be sure to follow the operating instructions supplied with the wall-mount bracket when installing the unit. s Be sure to attach the brackets supplied with the wall-mount bracket. When installing the unit on the wall, allow this much space. 30 cm (117/8 inches) 10 cm (4 inches) 5.
Installing on a level surface Lightning If you install the unit on a non-level surface, the unit may fall or drop and cause injury or damage. For added protection for this TV during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the receiver due to lightning and power-line surges.
Contents Introducing the TV Welcome .............................................................. 10 Package Contents.......................................... 10 Features......................................................... 10 Installing the TV .................................................. 11 Preventing the TV from Toppling Over .......... 11 Bundling the Connecting Cables.................... 12 Adjusting the Viewing Angle of the TV........... 12 TV Controls and Connectors .......................
Introducing the TV Welcome Thank you for purchasing this Sony HDTV Ready LCD TV. This manual is for model KLV-S40A10. Package Contents Along with your new TV, the packaging box contains a remote control, size AA batteries, 75-ohm coaxial cable (ferrite core attached), AC power cord, HD15-HD15 cable, Support belt, securing screw, wood screw, Operating Instructions, Quick Setup Guide, Leaflet (Installing the Wall-Mount Bracket) and warranty card. See page 65 for the quantity of each supplied accessory.
Introducing the TV Installing the TV Preventing the TV from Toppling Over Attaching the Support Belt Introducing the TV 1 Screw the support belt (supplied) to the TV stand with the wood screw (supplied). 2 Attach the support belt to the stand (TV), and anchor the belt with the securing screw (supplied) using a coin, etc. 3 Adjust the length by pulling the support belt towards you while holding the stand (TV). Be sure to take measures to prevent the TV from toppling over and causing injury.
Introducing the TV Bundling the Connecting Cables You can bundle the connecting cables as illustrated below. 1 Bundle the connecting cables. 2 Route the connecting cables through the hook. Adjusting the Viewing Angle of the TV This TV can be adjusted within the angles left and right (swivel).
Introducing the TV TV Controls and Connectors Front and Top Panel 2 3 4 5 6 TV/VIDEO VOLUME CHANNEL POWER Introducing the TV 1 ENTER WEGA GATE qa PIC OFF 7 8 TIMER 9 POWER 0 Item Description 1 ENTER Press to confirm the selection or setting. 2 WEGA GATE 3 TV/VIDEO Press to display WEGA GATE. Press again to exit WEGA GATE. Press repeatedly to cycle through the video equipment connected to the TV’s video inputs. 4 – CHANNEL + 6 POWER Press to adjust the volume.
Introducing the TV Side Panel Left side Right side VIDEO 2 IN 6 PC IN (RGB IN) 4 1 S VIDEO VIDEO AUDIO L(MONO) IN 2 5 R 5 L 3 AUDIO IN R Jack Description 1 VIDEO 2 IN S VIDEO 2 VIDEO 2 IN VIDEO/ L (MONO)AUDIO-R Connect to the S VIDEO output jack on your camcorder or other video equipment that has S VIDEO. S VIDEO provides better picture quality than composite video (2). Connect to the composite video and audio output jacks on your camcorder or other video equipment.
Introducing the TV Rear Panel Introducing the TV PC AUDIO IN Y 1 S VIDEO PB VIDEO L (MONO) PR L AUDIO AUDIO 2 R 1 7 L R R 4 3 VIDEO IN HD/DVD IN (1080i/720p/480p/480i) AUDIO OUT 3 AC IN VHF/UHF 6 4 5 Jack Description 1 VIDEO IN 1/3 S VIDEO Connect to the S VIDEO output jack of your VCR or other video equipment that has S VIDEO. S VIDEO provides better picture quality than the composite video (2).
Introducing the TV Jack Description 4 HD/DVD IN 4 (1080i/720p/ 480p/480i)/ L-AUDIO-R Connect to your DVD player’s or digital set-top box’s component video (YPBPR) and audio (L/R) jacks. Component video provides better picture quality than the S VIDEO (1) or the composite video (2) connections. 5 AUDIO OUT (L/R) Connect to the left and right audio input jacks of your audio or video equipment. You can use these outputs to listen to your TV’s audio through your stereo system.
Connecting the TV Making Video and Audio Connections Your TV includes several types of video inputs. When connecting your TV, use the inputs that are available on your devices that provide the best video performance, as described below.
Connecting the TV Basic Connections Cable System or VHF/UHF Antenna System Cable or VHF only or VHF/UHF 75-ohm coaxial cable Rear of TV VHF/UHF jack From the Channel settings, set Cable to On or Off for your type of input signal. A ferrite core is factory attached to the supplied 75-ohm coaxial cable. Do not detach the ferrite core from the coaxial cable. The ferrite core is attached to one end of (not the center of) the supplied 75-ohm coaxial cable.
Connecting the TV Satellite Receiver and Cable/Antenna This scenario shows a SAT Box connected through the video inputs and the Cable/Antenna connected through the VHF/UHF input. Satellite signals are selected by the SAT Box through the video inputs while TV signal is selected by the TV tuner. To connect a satellite receiver 1 Connect the satellite antenna cable to the satellite receiver’s satellite input jack.
Connecting the TV HD Equipment Disconnect all power sources before making any connections. 1 Using a component video cable, connect your equipment’s YPBPR z If your equipment has an HDMI or DVI connector, see page 26, 27. output jacks to the TV’s YPBPR input jacks. Use the HD/DVD IN 4 connections. Component video (YPBPR) connection is necessary to view 480p, 720p, and 1080i formats. Note that this TV displays all format types of picture in a resolution of 1,366 dots × 768 lines.
Connecting the TV Notes on Using This Connection Do This ... Watch the HD equipment Press WEGA GATE to select the HD equipment input (Video 4) in the External Inputs list. or Press TV/VIDEO repeatedly to select the HD equipment input (Video 4). Set up the remote control to operate the HD equipment Program the remote control. See “Programming the Remote Control” on page 34. Activate the remote control to operate the HD equipment Press SAT/CABLE (FUNCTION).
Connecting the TV Connecting Optional Equipment You can connect a variety of optional equipment to your TV. This section provides some of the individual connections you can make. For multiple connections, please refer to the Quick Setup Guide. VCR, Cable and Antenna z The most common setup is the Cable input into the VCR Antenna IN, the VCR Antenna Out to the VHF/UHF input.
Connecting the TV Notes on Using This Connection Do This ... Watch the VCR Press WEGA GATE to select the VCR input (Video 1, 2 or 3) in the External Inputs list. or Press TV/VIDEO repeatedly to select the VCR input (Video 1, 2 or 3). Watch cable channels Press WEGA GATE to select the VCR input (Video 1, 2 or 3) in the External Inputs list. or Press TV/VIDEO repeatedly to select the VCR input (Video 1, 2 or 3). Program the remote control. See “Programming the Remote Control” on page 34.
Connecting the TV DVD Player For best results, use this connection if your DVD player has component video (YPBPR) jacks. To connect a DVD player with component video connectors 1 Use a component video cable to connect the DVD player’s YPBPR output jacks to the TV’s YPBPR input jacks (HD/DVD IN 4). The YPBPR jacks on your DVD player are sometimes labeled Y, CB and CR, or Y, B-Y and R-Y. If so, connect the cables to their matching color jacks.
Connecting the TV Notes on Using This Connection Do This ... Watch the DVD player Press WEGA GATE to select the DVD player input (Video 4) in the External Inputs list. or Press TV/VIDEO repeatedly to select the DVD player input (Video 4). Set up the remote control to operate the DVD player Program the remote control. See “Programming the Remote Control” on page 34. Activate the remote control to operate the DVD player Press DVD/VCR (FUNCTION).
Connecting the TV HDMI-Equipped Device To connect a device with HDMI connector Use an HDMI cable to connect the device’s HDMI output connector to the TV’s HDMI IN connector on the right side panel. HDMI cables transmit both audio and video signals. (Separate audio cables are not necessary.) You can purchase HDMI cables at your local electronics store. Do not connect a PC to the TV’s HDMI input. Use the PC IN (RGB IN) connector instead when connecting a PC.
Connecting the TV DVI-HDTV-Equipped Device To connect a device with DVI-HDTV connector If the device does not have an HDMI connector, you can connect the TV’s HDMI IN connector to the device’s DVI-HDTV output connector using a DVI to HDMI cable. 1 Use a DVI to HDMI adapter or cable to connect the device’s DVI- The DVI-HDTV VIDEO connector does not provide audio, so audio cables must be connected to provide sound when a DVI to HDMI adapter is used. Do not connect a PC to the TV’s HDMI input.
Connecting the TV Personal Computer z When connecting to an Apple Macintosh computer, use the supplied HD15-HD15 cable to connect PC IN of the TV to video output connector of the computer. For some Apple Macintosh computers, it may be necessary to use an adapter (not supplied). If this is the case, connect the adapter to the computer before connecting the HD15HD15 cable. To connect a PC (personal computer) If you connect your PC to the TV, you can watch your personal computer’s display on the TV.
Connecting the TV Camcorder or Video Game Equipment For easy connection to a camcorder or video game equipment, the TV has left side A/V input jacks. If you prefer, you can connect the camcorder to the TV’s rear A/V input jacks. To connect a camcorder or video game equipment If your camcorder is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable. If you have a mono camcorder, connect its audio output jack to the TV’s L (MONO) audio input jack.
Connecting the TV Setting Up the Channel List After you finish connecting your TV, you need to run Initial Setup, which automatically sets up available channels. The Initial Setup screen appears when you turn on your TV for the first time after hooking it up. If you do not want to set up the channels at this time, you can do it later by selecting the Auto Program option in the Channel settings (see page 53). The Auto Program feature does not apply for installations that use a cable box.
Watching the TV Button Descriptions Button 1 2 MTS/ POWER MUTING DISPLAY SAP POWER SAVING FREEZE TV/ VIDEO 1 MUTING 2 DISPLAY 3 4 3 POWER SAVING 5 6 4 FREEZE RETURN WEGA GATE 7 5 JUMP 8 FUNCTION F1 9 F2 0 TOP MENU MENU GUIDE SLEEP qa qs MODE TV/SAT SOUND PICTURE WIDE z The 5 button, CH + button, N (Play) button and MTS/SAP button have a tactile dot. Use them as a reference when operating the TV.
Watching the TV Button MTS/ POWER MUTING DISPLAY SAP POWER SAVING FREEZE TV/ VIDEO qd SOUND qg qh qf PICTURE qj qk qg POWER qh MTS/SAP RETURN WEGA GATE FUNCTION F1 F2 TOP MENU MENU GUIDE SLEEP w; qk 0 - 9 ENT wa ws ql V/v/B/b wd wf qd MODE TV/SAT w; F1 wg wa F2 SOUND PICTURE WIDE qf wh ws SLEEP z The 5 button, CH + button, N (Play) button and MTS/SAP button have a tactile dot. Use them as a reference when operating the TV.
Watching the TV Programming the Remote Control The remote control is preset to operate Sony brand video equipment. MTS/ POWER MUTING DISPLAY SAP POWER SAVING FREEZE TV/ VIDEO 1 Sony Equipment Programmable Code Number DVD/VCR 601 (Sony Dream System) SAT/Cable 801 (Sony Satellite Receiver) Follow the steps below to program your TV’s remote control to operate the other video equipment. 2 Find the three-digit code for your equipment from the “Manufacturer’s Codes” listed on page 35.
Watching the TV Manufacturer’s Codes DVD Players Code 751 755 758 756 757 761 753 757 752 755 758 754 760 Fisher Funai General Electric Go Video Goldstar Hitachi Instant Replay JC Penney DVD Changers Manufacturer Sony Panasonic Code 765 766 DVD/VCR Combo Units Manufacturer Sony Zenith Toshiba Samsung JVC Broksonic Panasonic Code 767 768 773 774 775 776 777 HDD/DVD Combo Units Manufacturer Sony Code 770, 771, 772 5.
Watching the TV Using Other Equipment with Your Remote Control To operate other connected equipment with your TV, first turn to page 35 and program the necessary code. For operating video equipment, press TV/VIDEO repeatedly until you see the video input on the screen for your connected equipment. Remote control operation tips are provided below. Some functions cannot be operated depending on the equipment. In that case, operate by the remote control supplied with the equipment.
Watching the TV Operating a 5.1ch DVD AV System (Sony DAV) To Do This ... Press ... To Do This ... Press ... Play N Activate the remote control to operate the DVD DVD/VCR (FUNCTION) Stop x Turn on/off POWER Pause X Select other equipment connected to the DAV F1 Search the picture forward or backward M or m during playback VvBb F2 Move highlight (cursor) TOP MENU Select item Display the DVD disc menu MENU Change volume VOL +/–, MUTING Press ...
Watching the TV Special Buttons on the Remote Control Using the Wide Screen Mode 16:9 Original source (High definition source) 4:3 Original source (Standard definition source) Wide Mode : Wide Zoom MODE Wide Mode : Wide Zoom Wide Mode : Normal WIDE Wide Mode : Full Wide Mode : Full Wide Mode : Zoom Wide Mode : Zoom z When the TV receives a 720p or 1080i signal that is 4:3 aspect ratio picture with a black bar at each side, Full returns the picture to its original size.
Watching the TV Using the Jump Function You can change or jump between the last two channels. JUMP Previous channel z While the picture is frozen, the sound continues to be output normally. You can use this feature to write down information such as phone numbers, recipes, etc. When you press the button once, the current screen is frozen and the sub screen appears. When you press the button twice, only the frozen screen is displayed; when you press it a third time, the normal screen returns.
Watching the TV Using the Sleep Function z If you turn the TV off, and then turn it on again, the Sleep timer returns to Sleep Off. z “TV will turn off soon” appears one minute before the TV shuts off. This message may not appear if you are performing other operations in the settings. z You can set the Sleep timer to on using the Clock/Timers settings. Select Sleep in the Clock/Timers settings, then set it to 15, 30, 45, 60, 90 or Off.
Introducing WEGA GATE Overview of WEGA GATE WEGA GATE provides one button access for controlling your TV. It enables you to perform a variety of tasks intuitively with a control panel on the screen rather than a variety of remote control button presses. When you press the WEGA GATE button, you can perform basic TV operation: your favorite channels, watching TV, images from external equipment or setting menus. 1 Press WEGA GATE on the remote. WEGA GATE control panel appears.
Introducing WEGA GATE The WEGA GATE screen gives you access to the following items: Icon Description The Favorites feature lets you select programs from a list of up to 8 favorite channels that you specify. For details, see page 44. Favorites TV List The External Inputs feature lets you select equipment that is connected to your TV, such as a DVD player. You can assign a label to your equipment or skip unused inputs conveniently. For details, see page 45.
Introducing WEGA GATE Navigating and Select Use your remote control to navigate through WEGA GATE and the settings. To Do This ... Press ... Display WEGA GATE control panel Press WEGA GATE. Display Settings Move through Settings Press WEGA GATE and select Settings. Press V v B b. Select an option to change Move back to upper layer Press . Press RETURN or select Return in the settings. Select (confirm) changed setting Exit WEGA GATE control panel or Settings Press . Press WEGA GATE.
Introducing WEGA GATE Using TV List in WEGA GATE The TV List feature lets you select TV programs from a list of channel labels. You can also assign a label using Label Channels in the Channel settings (see page 54). 1 Select TV List from the WEGA GATE control panel and press . The TV channel list appears. Make your selection. TV List FOX ABC NBC CBS CNN TNT NICK PBS Select: Set: Exit: WEGA GATE 2 Press M/m to highlight the desired channel and press .
Using the Settings Overview of the Settings The Settings provides you access to the following features: Settings Allows you to set/change Video Picture Mode (page 48) Reset (page 48) Picture (page 48) Brightness (page 48) Color (page 48) Hue (page 48) Sharpness (page 48) Color Temp. (page 48) TV Video Picture Mode: Vivid Reset: Picture: Max Brightness: 40 Color: 60 Hue: 0 Sharpness: 18 Color Temp.
Using the Settings Settings Allows you to set/change Parent Lock (page 55) Select Country (page 55) Change Password (page 55) Parent TV Lock: Select Country: Change Password Select: Set: Off U.S.A.
Using the Settings Using the Video Settings To select the Video settings 1. Press 2. Select WEGA GATE Settings 3. Highlight Video 4. Press to select WEGA GATE WEGA GATE To exit the Video settings, press Selecting Video Options z To change from one Picture Mode to another, use PICTURE on the remote control. z You can alter the Picture Mode options (Vivid, Standard, Pro) for each video input (including the TV antenna input). z You can alter the Video settings (Picture, Brightness, Color, etc.
Using the Settings Using the Audio Settings To select the Audio settings 1. Press 2. Select WEGA GATE Settings Audio 3. Highlight Audio 4. Press to select WEGA GATE WEGA GATE To exit the Audio settings, press Selecting Audio Options z Treble, Bass and Balance are adjustable when the Audio Out option is set to Variable. Select: .
Using the Settings Option Description z Headphones are off when the Speaker option is set to Off. Speaker On Off z Variable in Audio Out option is available only when the Speaker option is set to Off. Audio Out Easy control of volume adjustments Variable 50 Fixed Select to turn on the TV speakers. Select to turn off the TV speakers and listen to the TV’s sound only through your external audio receiver and speakers.
Using the Settings Using the Screen Settings To select the Screen settings 1. Press 2. Select WEGA GATE Settings 3. Highlight Screen 4. Press to select WEGA GATE Selecting Screen Options z For Wide Zoom and Zoom modes, you can adjust the vertical position of the picture. For details, see page 52. z Normal, Full1 and Full2 are available for Wide Mode when PC input is selected. z 4:3 Default functions only when the TV receives 480i or 480p signals.
Using the Settings z 4:3 Default and Overscan are not available for PC Input. z The setting of V Center and H Center can be between – 50 and + 50 for PC input. z H Center feature is useful if TV is connected to game equipment. z Adjust Phase and Pitch with Wide Mode set to Normal. Option Description Overscan Normal +1/+2 Displays a standard size picture. Allows you to adjust the viewable picture area size. This is useful for viewing ticker tape or banners at the top or bottom of the screen.
Using the Settings Using the Channel Settings To select the Channel settings 1. Press 2. Select WEGA GATE Settings 3. Highlight Channel Channel 4. Press to select TV Favorite Channels Cable: On On Channel Fix: Off Off Auto Program: Show/Hide Channels Label Channels WEGA GATE Select: WEGA GATE To exit the Channel settings, press Selecting Channel Options Set: Back: Exit: WEGA GATE The Channel settings includes the following options: To highlight an option and to change settings, press VvB b.
Using the Settings z Channels that you set to be hidden can be accessed only with the 0-9 buttons. z Also, you can access the TV channel list on the WEGA GATE control panel. 54 Option Show/Hide Channels Description Allows you to show or hide channels that appear when you use the CH +/– buttons. 1 Press V/v to scroll through the channels until you find the channel you want to show or hide. Then press to select it. 2 Press V/v to determine if the channel will be shown or hidden.
Using the Settings Using the Parent Settings The Parent settings allows you to set up the TV to block programs according to their content and rating levels. To select the Parent settings 1. Press 2. Select WEGA GATE Settings Parent 3. Highlight Parent 4. Press to select TV Lock: Select Country: Change Password Off Off Child Youth Young Adult Custom WEGA GATE Use 0-9 on the remote control to enter a four-digit password. The first time you create a password, confirm the password by entering it again.
Using the Settings US Models: Selecting Custom Rating Options z The Content-Based Ratings are linked to the level of the Age-Based Rating. For example, a program with an AgeBased Rating of TV-PG V (Violence) rating may contain moderate violence, while a TV-14 V (Violence) rating may contain more intense violence. z To ensure maximum blocking capability, set the Age-Based Ratings.
Using the Settings Canadian Models: Selecting Custom Rating Options For Canadian models, the Custom Rating menu includes the following options. For US models, see page 56. Option English Rating French Rating Viewing Blocked Programs C All children. C8+ G Children 8 years and older. General programming. PG 14+ Parental Guidance. Viewers 14 and older. 18+ G Adult programming. General programming. 8ans+ 13ans+ Not recommended for young children. Not recommended for ages under 13.
Using the Settings Using the Clock/Timers Settings To Select the Clock/Timers settings 1. Press 2. Select 3. Highlight WEGA GATE Settings Clock/Timers 4. Press to select Clock/Timers TV Sleep: Timer 1: Timer 2: Current Time OffOff Off15 minutes Off30 minutes 45 minutes 60 minutes 90 minutes WEGA GATE Select: WEGA GATE To exit the Clock/Timers settings, press Selecting Clock/Timers Options z To return to the Timer settings after programming one of the Timers or current time, press B.
Using the Settings Option Description Current Time Select to set the current time (day, hour, minute, and AM/PM). 1 2 3 Press to select Current Time. Press V/v to set the current time (day, hour, minute, and AM/PM). Press or b to confirm each setting and move to the next setting. Press B to go back to the previous setting. Press WEGA GATE to exit Settings.
Using the Settings Using the Setup Settings To select the Setup settings 1. Press 2. Select WEGA GATE Settings 3. Highlight Setup Setup 4. Press to select WEGA GATE Select: WEGA GATE To exit the Setup settings, press Selecting Setup Options . Set: Off Off On CC1 CC2 English CC3 On CC4 Standard Text1 On Text2 Text3 Text4 Back: Exit: WEGA GATE The Setup settings includes the following options: To highlight an option and to change settings, press V v B b. Press to confirm the selection.
Using the Settings z If you have assigned Video Labels, you can access the External Inputs list on the WEGA GATE control panel. Option Description Label Video Inputs Allows you to identify A/V equipment you connected to the TV, such as a VCR, DVD, etc. For example, if you have a DVD player connected to the VIDEO 4 jack, you can select the label DVD for the VIDEO 4 input. Then when you press TV/VIDEO to change inputs, the Video Label you assigned to that input appears on screen.
Other Information Troubleshooting Trouble Symptoms and Remedies Problem Possible Remedies No picture (screen not lit), no sound. No picture. No picture. Cannot receive any channels. ❑ If your TV does not turn on, and a red light keeps flashing, your TV may need service. Call your local Sony Service Center. ❑ ❑ ❑ ❑ ❑ ❑ Check Power Saving settings (page 61). Make sure the power cord is connected securely. Turn on the power of the TV. Check antenna/cable connections.
Other Information Problem Possible Remedies Only snow and noise appear on the screen. ❑ ❑ Dotted lines or stripes. ❑ No color/Dark picture/Color is not correct. The picture is too bright. Noisy picture. ❑ ❑ ❑ ❑ ❑ ❑ No sound/Noisy sound Good picture, no sound. ❑ ❑ ❑ ❑ Striped noise during playback/recording of a VCR. ❑ ❑ ❑ ❑ ❑ ❑ Cannot operate settings item. Wide Screen Mode changes automatically. Remote control does not operate. ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ Check the volume control.
Other Information Problem Possible Remedies Cannot change channels with the remote control. ❑ ❑ Lost password. ❑ If you are using another device to change channels, be sure you have not inadvertently switched your TV from channel 3 or 4 setting. Use the Channel Fix option to “fix” the channel based on the type of hookup (page 53). If you are using another device to control channels, be sure the FUNCTION button for that device has been pressed.
Other Information Specifications Speaker: Television system: Speaker output: American TV standard Channel coverage: VHF: 2-13/UHF: 14-69/CATV: 1-125 Antenna: 75-ohm external terminal for VHF/UHF Full range: 5.
Index 4:3 Default, screen setting 51 5.
P, Q Parent setting 47, 55 parental control, described 10 Password 55 PC AUDIO IN 16 PC IN 14 Personal Computer connection 28 phase, adjusting 52 PIC OFF LED 13 PICTURE button 33 Picture modes, selecting 48 Picture off, power saving 61 picture, adjusting 48 pitch, adjusting 52 POWER button 13, 33 POWER LED 13 Power Saving 39, 61 POWER SAVING button 32 Pro mode 48 problems, troubleshooting 62–64 R ratings, Parent setting 56–57 ratings, viewing blocked programs 56, 57 Reduced, power saving 61 remote control
Printed on 100% recycled paper.
