Reference Guide

D:\_SONY TV\SY150017_XML_UC2_RG (REV-1)\4562086121_US\030ADD_US.fm masterpage: Left

KDL-48W700C / 40W700C

4-562-086-12(1)

To detach the Table-Top Stand from the TV, remove the screws.

Note

• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the

TV.

• When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that

is larger than the TV.

• To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface.

• Be sure the TV is vertical before turning on. To avoid uneven picture uniformity do not power on the TV

with the LCD panel facing down.

• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the

original holes on the rear of the TV.

Detaching the Table-Top Stand from the TV