4-180-189-11(1) LCD Digital Color TV Setting up your TV To watch TV Additional Information Setup Guide (Operating Instructions) Sony Customer Support U.S.A.: www.sony.com/tvsupport Canada: www.sony.ca/support United States 1.800.222.SONY Canada 1.877.899.
Owner’s Record The model and serial numbers are located at the side and rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this TV. Model Name Serial No. CAUTION To prevent electric shock and blade exposure, do not use this polarized AC plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted.
Table of Contents Checking the accessories..............................................................................................................4 Inserting batteries into the remote control .....................................................................................4 Setting up your TV Attaching the Table-Top Stand......................................................................................................5 Connecting the TV.........................................................
Checking the accessories Table-Top Stand (1)*1 Fixing screws for Table-Top Stand (M5 × 16) (4) Assembling Screws for Table-Top Stand (M5 × 16) (4) Remote control (1)*2 Size AAA batteries (2) *1 Assembling the Table-Top Stand is required. Refer to other leaflet to assemble the Table-Top Stand. *2 Please refer to the model name printed on the remote control. Inserting batteries into the remote control Push and lift the cover to open.
Setting up your TV • Ensure your TV has adequate ventilation, see page 13. • For best picture quality, do not expose the screen to direct illumination or sunlight. • Avoid installing the TV in a room with reflective wall and floor materials. • If the TV is brought directly from a cold to a warm location, or is placed in a very damp room, or is placed in a room in which heating has just been turned on, moisture may condense on the surface or inside the TV.
Connecting the TV The following chart shows the high-definition (HD) and standard-definition (SD) video formats supported by your BRAVIA TV inputs. * For supported PC formats refer to the i-Manual. Recommendation of the F type plug Projection of the inner wire from the connection part must be less than 1.5 mm. 1.
Shown with a Set Top Box with HDMI connection Shown with a Set Top Box with COMPONENT connection Y VIDEO IN 1 1 IN ARC PB PR (MONO) L L AUDIO R R 1 2 Setting up your TV Set Top Box Set Top Box Cable System or VHF/UHF Antenna System CABLE / ANTENNA Cable or Antenna (Continued) 7
Shown with HD BRAVIA® Sync™ Basic Connection *Rear of TV Side Panel PC IN LAN RGB IN ARC 1 IN Y VIDEO IN 1 2 PB PR AUDIO PC/HDMI 1 AUDIO IN L L 3 (MONO) L VIDEO AUDIO AUDIO CABLE / ANTENNA R 1 L R R (MONO) 2 AUDIO R 2 VIDEO IN SAT (Dish) *A/V Receiver AM SAT IN DVD IN COAX IN AUDIO IN VIDEO 2/BD IN L L R OPT IN SAT OPT IN VIDEO 1 DVD OUT R AUDIO IN AUDIO IN FRONT R FRONT L SUR R SUR L CENTER SUBWOOFER Cable/ Antenna HD Cable Box or HD Satellite Receiver *BD
Shown with PC Connection with SD VCR/DVD Rear of TV Notebook PC PC IN LAN RGB 1 IN ARC Y VIDEO IN 1 PB PR AUDIO PC/HDMI 1 AUDIO IN L L (MONO) L AUDIO CABLE / ANTENNA R 1 AUDIO R R 2 or Setting up your TV Splitter PC VCR DVD VCR/DVD Combo Cable/Antenna 9
2 Securing the TV Sony strongly recommends taking measures to prevent the TV from toppling over. Unsecured TVs may topple and result in property damage, serious bodily injury or even death. Secure the TV to the Stand Use the optional hardware listed below (not supplied): • M4 × 16 machine screw (screwed into the TV’s Table-Top Stand) • A screw or similar (attach it to the Stand) • Rope or chain (strong enough to support the weight of the TV). Make sure that there is no excess slack in the rope or chain.
Organizing the AC power cord 4 Select Continue to scan for available channels and enable the TV Guide On Screen® feature. If you receive channels from a cable box or satellite receiver and do not wish to use the TV’s built-in tuner, select Skip. Selecting Skip will disable the TV Guide On Screen feature, which is only available when the TV’s tuner is used. Detaching the Table-Top Stand from the TV Remove only the screws marked with the TV.
Using a Wall-Mount Bracket Your TV can be mounted on a wall using a Wall-Mount Bracket (not supplied) out of the box as packaged. If the Table-Top Stand is attached to the TV, the TV may require detaching the Table-Top Stand; see “Detaching the Table-Top Stand from the TV” (page 11). Prepare the TV for the Wall-Mount Bracket before making cable connections.
Installing the TV Against a Wall or Enclosed Area Make sure that your TV has adequate ventilation. Allow enough space around the TV as shown below. Operate the TV at temperatures between 41°F and 95°F (5°C and 35°C). Installed with stand 4 inches (10 cm) Setting up your TV 11 7 /8 inches (30 cm) 2 3 /8 inches 4 inches (10 cm) (6 cm) Leave at least this much space around the set.
To watch TV To watch programs 1 1 Turn on the TV. Press POWER on the TV or on the remote control to turn on the TV. GUIDE OPTIONS 2 HOME Select a TV channel. 0-9 ENT 2 To use the Guide Press GUIDE to display the TV Guide On Screen to view scheduled programs or to select a program to watch. Press again to exit the Guide. Use with 0-9 and ENT to select digital channels. For example, to enter 2.1, press , , and ENT.
To use i-Manual 1 Your BRAVIA TV comes with an on-screen manual. To learn more about your TVs features you can access your i-Manual with the touch of a button. 1 Press i-MANUAL. 2 Press F/f/G/g/ select items.
Playing a disc Playback The Playback feature allows you to play a desired disc by simply inserting it into the disc slot. 1 Insert a disc into the slot with the playback side facing away from you. 2 For a video disc, playback starts automatically. For a music or photo disc, select from the Music or Photo category in the “XMB” and press . ~ • If playback does not start automatically, select from the Video category in the “XMB” and press .
Additional Information Troubleshooting The TV will indicate any problems with the STANDBY indicator flashing in red. When the STANDBY indicator is flashing The self-diagnosis function is activated. 1 Count how many times the STANDBY indicator flashes between each three second break. For example, the indicator may flash three times, go off for three seconds, then flash again three times.
How to Care for Your BRAVIA Safety is very important, please read and follow the safety documentation (Safety Booklet) separately provided. Unplug the TV and other connected equipment from the wall outlet before you begin cleaning your TV. • Wipe the LCD screen gently with a soft cloth. • Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water. • If using a chemically pretreated cloth, please follow the instruction provided on the package.
Specifications Model name KDLSystem 40EX40B Television system NTSC: American TV standard ATSC (8VSB terrestrial): ATSC compliant 8VSB QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality) Channel coverage Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69 Analog Cable: 1 - 135 / Digital Cable: 1 - 135 LCD (Liquid Crystal Display) Panel 10 W + 10 W Panel system Speaker output 32EX40B Input/Output jacks CABLE/ANTENNA 75-ohm external terminal for RF inputs VIDEO IN 1/2 COMP
Declaration of Conformity Trade Name: SONY Model: KDL-40EX40B/KDL-32EX40B Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone Number: 858-942-2230 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Safety information about built-in BD player • The use of optical instruments with this product will increase eye hazard. As the laser beam used in this built-in BD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. • • • • This label is located on the laser protective housing inside the enclosure. This appliance is classified as a CLASS 1 LASER product.
Precautions about built-in BD player • The TV has a region code located on the rear of the unit. • Do not use cleaning discs or disc/lens cleaners (including wet or spray types). These may cause the apparatus to malfunction. • When ejecting a disc, the disc may hit objects and cause damage or injury. Keep an open space around the disc slot. • Take out any discs from the built-in BD player when you move the TV. If you don’t, the disc may be damaged. Eject and take out the disc before moving the TV.
For Your Convenience Online Registration: Be sure to register your TV. United States Canada http://productregistration.sony.com http://www.SonyStyle.ca/registration Your TV is capable of receiving software updates. For the latest information about software updates for your TV, visit: Software Updates: United States Canada http://www.sony.com/tvsupport http://www.sony.
