2-B97-544-12(1 ) LCD Projection HD-TV Operating TV instructions WEGA © 2005 Sony Corporation ENGINE_M
Owner's Record Tile model and seri+d num6ers arc Ioc+tted +tllhe rear ol tile TV. Record these numbers in tile spaces pro_ ided below. Relcr to them whene_ er you call upon your Sony dealer regarding lhis product. Model Serial No. No. Contacting Sony |t, alter reading tile following instruction_, you have additional es Is elaed o le seoly trS 1_ TV, ple sec llole Ik_llowing nunlbers.
WARNING To reduce the risk ol fire or electric shock, do not expose Ibis apparatus l'_l]n or Declaration of Conformity to Trade Name: SONY Model: KDF-E42A 10/KDF-E50A 10 Responsible ParD': Sony Electronics Inc, Address: 16450 W. Bemardo Dr., San Diego, CA 92127 U.S.A. Telephone Nmnber: 858-942-2230 inoisture. This device complies with part 15 of the FCC rifles.
[] To obtain tile best picture, ilhunination lighting or direct directed I_Lce the screen hi a room wher_ [] See pages down do not expose sunlight. fl'om tile ceiling with opaque drapery. tile I'h)or alld walls 13 and 14 lot inore file screen It is rcconnnended rn I to dirccl to use spot or to cover tile windows thai It is desirable to install tile TV arc not el a reflectP, e lllatcria]. ink)rlnation on tile installation.
Important Safety Instructions I) Read tlaese instluctions. 2) Keep tiles instructions. all warnings. 3) Heed 4) Follow 5) Do nol u_ 12) Use only with tile cart, stand, tripod, bracket, or lable specified by tile manul, Lcturer, or sold with file appar_mls. When a cart is usvd, use caution when nloving tile carl!apparatUs con/bin_Jlkm 1o avoid injmy fi'om tip-over. all instructions. this apparatus near water.
Antenna Grounding According to the NEC For Safety Relcr to section 54-300 of Canadiml Electrical Code tor Antenna Grounding. Be Careful When Moving the TV ----'
Welcome ................................................................ Package Contents ............................................ Features ........................................................... Enjoying Your TV ................................................ Notes on the TV ............................................. Screen ............................................................ Indicators ....................................................... Projection Lamp .............................
Accessing the Screen Settings ......................... Selecting Screen Options .............................. Selecting PC Screen Options ........................ Accessing the Channel Settings ....................... Selecting Channel Options ............................ Accessing the Parental Lock Settings .............. Selecting Parental Lock Options .................... Viewing Blocked Programs ............................ Selecting Custom Rating Options ..................
Welcome Thank you for purchasing this Sony's HD LCD projection TV. This manual is for models KDF-E42AI0 and KDF-E50AI0. 2. Package Contents Along with your new TV, the packing box contains a remote control and two AA (R6) batteries. See page 95 for the complete list of packaging contents.
Introducing the TV CableCARD slot. After the service is activated with your cable TV company, the card replaces the need for a sepalate set-top box. (Check with your cable TV company about CableCARD service details, limitations, pricing, and availability. For more information about the CableCARD device in this manual, see page 30.) 10 [] Component Video Inputs: Offers the best video quality for DVD (480p, 480i) and digital set-top box (1080i, 720p, 480p, 480i) connections.
Introducing Enjoying the TV Your TV To enjoy your TV for years to come and maintain you should perform periodic maintenance. Notes on the TV To enjoy clear picture [] Prevent sunlight or other light sources [] its original picture quality, from shining directly on to the screen. The screen surface is easily scratched. Do not rub, touch, or tap it with sharp or abrasive objects (see "On Contamination on the Screen Surface" on page 6).
Introducing the TV Indicators Screen Indicators The indicators show the current status of your TV. If there is a change in the condition el a problem with the TV, the indicators will flash el light up in the manner described below to let you know that it requires your attention. POWER/ green : The lamp for the light source is preparing to turn STANDBY flashing on. When it is ready, it turns on. red : The lamp door or the lamp is not securely attached.
Introducing Installing Carrying the TV the TV Your TV Carrying tile TV requires at least two people. Do not hold by the pedestal or the front panel of the TV. Doing so may cause these parts to break off. 2. Do not grasp the pedestal or the front panel of the TV. ,,,,# When moving tile TV, place one hand in tile hole on tile lower portion of tile TV while grasping tile top with the other hand, as shown in the illustration below.
Introducing the TV Preventing the TV from Toppling Over As a protective measure, secure tile TV as follows. Using the TV stand with support belts [] Sony strongly recommends using the TV stand SU-RGl IS (for KDFE42AI0)/SU-RGI I M (for KDF-E50AI0) with a support belt designed for your TV. when using the SU-RGllS (f0r KDF.E42Ai0)/SU,RG11M (for KDFE50A10) stand for your TV, you must use the support belt.
Introducing TV Controls Front the TV and Connectors Panel To open the panel To open the front panel of your TV, push up the panel door just under the "PUSH OPEN" mark. PUSH OPEN TIr_EH_ LAMPE] POWER/STANDBYo_ D POWER [] WEGA GATE Press to display WEGA GATE and activate the -}-, _,, ,_, ,1!,,and t1"buttons. Press again to exit WEGA GATE and activate the TV/VIDEO, - VOLUME + and - CHANNEL+ buttons. [] -*_-_ TVNIDEO Press to confirm the selection or setting.
Introducing the TV Side Panel [] [] HD/DVD IN 2 to your DVD player's or digital set-top video provides 480p1480i) panel) video ([_] of rear panel) VIDEO IN 2 (MONO)/AUDIO or the composite Connect L equipment. Ft settings, to the composite When Auto the component better box's component (L/R) .jacks.
Introducing the TV Rear Panel i / CABLE . VHF/UHF :::::::::::::::::::::::::::::::: iil T/......................... 91Q ................................................. !_"::, i+, ..................................................... ! ..... W i [] CABLE VHF/UHF [] CableCAFID [] [] PC IN 7 HDMI IN 6 HDMI/ L-AUDIO-R 6 RF input that connects to your cable and VHF/UHF antenna signal.
Introducing the TV [] VIDEO IN 1 Connects S VIDEO [] VIDEO IN 1/3 Connect VIDEO/ L-AUDIO-R [] [] S VIDEO IN 4/5 Conuect to your DVD player's (L/R) jacks. 480p/480i)/ L-AUDIO-R composite OUT DIGITAL Connect L/R Component video ([]) AUDIO picture quality or digital video provMes Connects video equipment than the composite 2) is located set-top box's component better that has video ([_]). .
Overview Your new LCD projection TV can receive both analog and digital broadcasting signals fiorn antenna, satellite and cable TV. To display clear crisp pictures, you must connect your TV correctly and choose tile correct display forlnat (see " U.'mg s" tile WIDE Button" on page 53). It is strongly recommended coaxial cable to receive optimum lead cable can be easily affected signal deterioration. If you use a away as possible from the TV.
ConnecUng_e TV @ About Using S VIDEO If the optional equipment you are connecting has an S VIDEO jack (shown at left), you can use an S VIDEO cable for improved picture quality (compared to an A/V cable). Because S VIDEO carries only the video signal, you also need to connect audio cables for sound, as shown below.
Connecting the TV Basic Connections The way in which you connect your TV will vary, depending on how your holne receives a signal (antenna and satellite; cable and cable box) and whether or not you plan to connect a VCR.
ConnecUng_e Cable System VHF/UHF TV or For best results, [] [] use this connection if you: Have a cable and/or an antenna. (This is convenient additional channels Do not have a cable and 24. If you have Cable Type if you are using a separate rooftop antenna to receive that are not provided by your cable TV company.) box or VCR. (If you have a cable box, see pages 23 a VCR, see pages 34 and 35.) ConnectAs Shown Cable TV (CATV) and Antenna CATV cable _J,_LE V._U.
Connecting the TV Cable Box and Antenna For best results, use this connection if: [] Your cable company scrambles some channels, such as premium channels (which requires you to use a cable box), but does not scramble all channels. [] You do not have a VCR. (If you have a VCR, see pages 34 and 35.) With this connection [] Use tile TV's you can: remote control to change channels coming through cable box to tile TV's CABLE input.
ConnecUng_e Cable Box TV For best results, use this connection [] Your cable colnpany cable box. [] You do not have a VCR. (If you have a VCR, see pages 34 and 35.) With this connection [] scralnbles if: all channels, which requires you to use a you can: Use the TV's remote control to change channels coming through the cable box to the TV's VHF/UHF input jack. (You must first program the remote control for your specific cable box.
Connecting the TV Satellite Receiver Disconnect all power sources before making any connections. t Connect the satellite SATELLITE _') cable to the satellite receiver's IN jack. Use A/V and S VIDEO and S VIDEO ;3 antenna cables to connect the satellite OUT jacks to the TV's AUDIO receiver's and S VIDEO Use a coaxial cable to connect your cable to the TV's CABLE your antenna to the TV's VHF/UHF jack. AUDIO IN jacks.
ConnecUng_e TV Digital Cable Box or Digital Satelfite Receiver Disconnect all power sources before making any connections. t Connect tile RF coaxial cable from the CATV or satellite input of the digital cable box or digital satellite dish to tile receiver. 2 Use a component video cable to connect the digital cable box o1 satellite receiver's YP_PI_ jacks to the TV's Y PdCt_ PIdCR jacks. Use the HD/DVD IN 4 o1 5 input. _ component Video (V P./C. PP./C.
Connecting the TV Equipment with HDMI Connection ";_"The HDMI jack provides both video and audio signals, so it is not necessary to connect an audio cable. Use this hookup if: [] Your equipment has a High-Definition Multimedia Interface (HDMI). Disconnect all power sources before making any connections. Using an HDMI cable, connect TV's HDMI IN jack.
ConnecUng_e Equ_ment ConnecHon TV with DW Disconnect all power sources before making any connections. If you are connecting with DVI-HDTV output, you can connect to the TV's HDMI IN jack by using an HDMI-to-DVI cable or an adapter (both not supplied). Rear of TV Equipment with DVI output AUDIO-L HDMI-to-DVI cable or adapter Audio cable _ 28 When using a HDMI,to-DVI cable or an adapter, be sure to connect the DVI output connector first; then connect to the HDMI input on your TV.
Connecting the TV Equipment with Digital Audio (Optical) Disconnect all power sources before making any connections. You can use the TV's DIGITAL AUDIO (OPTICAL) OUT jack to connect a digital audio device that is PCM/Dolby Digital compatible, such as an audio amplifier. Using an optical audio cable, connect the device's TV's DIGITAL AUDIO (OPTICAL) OUT jack.
ConnecUng_e TV Using CableCARD Device The CableCARD device provides cable subscribers with access to digitally encrypted cable channels -- without the need for a set-top box -- that will enable you to receive not only standard definition but also high definition television. The CableCARD device, which is provided by your cable TV company, is inserted into the TV's rear panel CableCARD slot. After the service is activated with your cable TV company, the card replaces the need for a separate set-top box.
Connecting the TV 3 "_°You can also access information about your CableCARD device in the Applications settings (see page 84). Removing the CableCARD Device 4 5 Alter 1-2 minutes, the CableCARD device setup screen is automatically displayed. This screen includes information your cable TV company will request before they can activate your service. Follow the displayed instructions: Phone your cable TV company. representative will guide you through the activation process.
ConnecUng_e TV Setting Up the Channel List Ariel you finish connecting the TV. you can run tile Initial Setup to create a list of available analog and digital channels. The Initial Setup screen appears when you turn on tile TV for tile first time after hooking it up. If you choose to set up the channels at a later time, select the Auto Program option in the Channel setting to scan available channels (see below).
Connecting the TV Connecting Optional Equipment You can connect a variety of optional equipment to your TV. This section provides some of the individual connections you can make. For multiple connections, please refer to the Quick Setup Guide. VCR and Cable 34 VCR and Cable Box 35 Two VCRs for Tape Editing DVD Player with Component DVD Player with S VIDEO Persoi_al Computer Camcorder Audio and Audio ...........................
ConnecUng_e TV VCR and Cable Use tiffs hookup if: [] You have cable TV that does not require a cable box. Disconnect all power sources before making any connections. t Connect tile CATV cable to tile single (input) jack of tile splitter. a,_ Use a coaxial cable to connect the TV's CABLE ;3 Use a coaxial cable to connect VCR's 4 one of the output jack of the splitter to jack. tile splitter's other output jack to tile input jack.
Connecting the TV VCR and Cable Box Use this hookup if: [] Your cable TV company scrambles some channels, but not all of them (pay channels vs. regular cable channels) and you need to use a cable box. With this connection you can: [] Use tile TV's relnote control to change channels when the signal is scralnbled. To program operate your cable box, see "Programming page 47.
ConnecUng_e TV Rear of TV _,,,, S VIDEO cable VIDEO AUDIO-L "_ AUDIO-R_,7 VCR AUDIO-L _ '_"bVIDEO Y AUDIO-R AUDHOR AUDHOL VHDEO A/V cable Coaxial cable 36 S_EO c°tx_p2 l ,,_Vcab,e_ _ _ m _
Connecting the TV Two VCRs for Tape Editing If you connect two VCRs, you can record fiom one VCR to tile other while using your TV to monitor what is being recorded. Disconnect all power sources before making any connections. t Use an A/V cable to connect the recording 2 tile phtyback VCR's A/V output jacks to VCR's A/V output jacks to VCR's A/V input jacks. Use an A/V cable to connect the recording the TV's A/V input jacks. 2 "..
ConnecUng_e TV DVD Player with Component Video Connectors Use this hookup if: [] Your DVD player has component (YPI3PI0jacks. Disconnect all power sources before making any connections. t Use a colnponent video cable to connect to the TV's Y PdCt_ PIdCR jacks. tile DVD player's Use the HD/DVD YP_3PRjacks IN 4 or 5 input. J_ The YPBPR jacks on your DVD playe r are sometimes labeled YCBCR, or Y, B.Y and R.Y. If so, connect the cables to like colors.
Connecting the TV DVD Player with S VIDEO andAudio Connectors Use tiffs hookup if: [] Your DVD player does not have component (YPBPI0 jacks. Disconnect all power sources before making any connections. t 2 Use an A/V cable to connect the DVD player's the TV's AUDIO IN jacks. Use an S VIDEO cable to connect the TV's S VIDEO AUDIO the DVD player's OUT jacks to S VIDEO jack to jack.
Connecting Personal the TV Computer ";_'When connecting to an Apple Macintosh computer, use the HD15-HD15 cable to connect PC IN of the To connect a PC (personal computer) If you connect your PC to the TV, you can watch your personal computer's display on the TV. When your PC is connected to the TV with the HDI 5-HDI 5 cable and optional audio cable, you can view and listen to the PC's video and audio output on the TV. Rear of TV TV to video output connector of the computer.
Connecting the TV Camcorder or "PlayStation" You can connect a camcorder or "PlayStation" to your TV. For easy connection, use VIDEO IN 2 on the left side of the TV. To use the S VIDEO jack instead of the VIDEO jack (yellow), use VIDEO IN 1 on the rear panel of the TV. To connect a camcorder or "PlayStation" Use A/V and S VIDEO cables to connect to VIDEO IN 1 the AUDIO and S VIDEO jacks on the camcorder or "PlayStation" to the AUDIO jacks on the rear panel of the TV, as shown below.
Connecting Audio the TV Receiver For improved sound quality, you may want to play the TV's audio through your stereo system (see page 67). Disconnect all power sources before making any connections. Using an audio cable, connect the TV's AUDIO the audio receiver's audio LINE IN jacks. OUT (VAR/FIX) jacks to Y_ AUDIO OUT jacks are operable only when the TV,s Speaker is set to off.
Overview The table on the next page describes the buttons on the remote control. Inserting Batteries into the Remote Control 43 Button Descriptions 44 Programming 47 Manufacturer's Inserting Batteries the Remote Control Codes .................................................................................................................................. 48 .............................................. Using Other Equipment with Your Remote Co;_troi 49 .............................
Watching the TV Button Descriptions [] MUTING Press to mute the sound. Press again or press VOL + to unnmte. [] TV/VIDEO Press to cycle through TV's video inputs. [] FUNCTION Buttons The FUNCTION button indicator lights tip momentarily when pressed to show which external equipment the remote control is operating. When the remote control is set to operate the external equipment, these buttons will operate the equipment you choose.
Watching the TV [] VISUAL SEARCH To be used only with your connected visual search function. (Non-operable [] VOL +/- Press to adjust the volume. [] DVDNCR • the I! • Record Buttons MEN U external equipment button for TV) with REC: Press to record. By pressing this button alone will start recording. REC PAUSE: Press to pause the recording. REC STOP: Press to stop the recoMing. [] TOP Press to display the disc menu from your connected DVD player.
Watching the TV 46 [] [::1 Press to select the function of connected components. For details, see "Using Other Equipment with Your Remote Control" on page 49. [] [::2 Press to select the function of connected components. For details, see "Using Other Equipment with Your Remote Control" on page 49.
Watching the TV Programming the Remote Control The remote control is preset to operate Sony brand video equiplnent. DVR 772 DVD/VCR 601 (Sony Drealn System) SAT/CABLE 801 (Sony Satellite Receiver) Follow tile steps below to program non-Sony video equipment. your TV's relnote control to operate tile 'S.' Find tile three-digit code for your equipment fiTom the ii Manutacturer Codes" listed on page 48. If more than one code number is listed, try entering from the code listed first.
Watching the TV Manufacturer's Codes DVD Players Citizen (jllaig 332 3021 332 Sharp Signature 2000 (M. 327, 328 338. 327 _},":iis M.ii_Ls 30413gg,31i9 Wa,-_!)................................. Se W 751 Daewoe ........ 34K 312, 309 SV20(X) General Electric 755 DBX .......................................... 313_ 3363357 ........................ Syl'¢a,fia .......... 318. 309 338. 310 Hitachi JVC ...................... 758 756 Oi£_ensia .............................. 3(14....... .....
Watching the TV Using Other Equipment with Your Remote Control To operate other equipment connected to your TV. first turn to page 48 and prograln the necessary code. For operating video equipment, press TV/VIDEO repeatedly until you see the video input on the screen for your connected equipment. Remote control tips are provided below. f_ Some functions cannot be operated depending on the equipment. In that case, operate by the remot e control supplied with the equipment.
Watching the TV Operating a 5.
Watching the TV Special Buttons on the Remote Control This TV colnes with convenient features that can be accessed pressing their buttons on your remote control. Using the GUIDE Button This TV is equipped to show program information station. The Program Guide lets you review program both analog and digital channels. directly if it is available information, by froln tile and select To display the Program Guide: J'11 Tune your TV to a channel by using tile 0-9, @, and ENT buttons. f.
Watching the TV Using the Program Guide The Program Guide allows you to select the channels from a drop down list. The Guide also provides information about the cunent program being shown on each channel. La Subchannels are additional channels of programming broadcast simultaneously. For example, channel 4 might include three subchannels (4.1, 4.2, 4.3) that are showing programs at the same time. Using the Program Options Setting Tile Program Options setting allows on the currently tuned channel.
Watching the TV Using the WIDE Button Wide screen mode lets you watch 4:3 normal screen modes (16:9 aspect ratio). broadcasts 4:3 Original source (Standard definition source) in several wide 16:9 Original source (High definition source) WiDE 2. "_" When the TV receives a 720p or 1080i signal that is 4:3 aspect ratio picture with a black bar at each side, Full returns the picture to its original size. _ When the TV receives a 720p or 1080i signal, Normal cannot be selected.
Watching the TV Using the JUMP Button Tile JUMP button allows you to jump back and forth between channel and the last channel that was selected. tile current JUMP Previous Using the FREEZE Button 54 channel The FREEZE button allows you to temporalily capture a program's picture. You can use this feature to write down information such as phone numbers, recipes, etc. To cancel FREEZE and return to normal viewing, press the FREEZE button again.
Overview of WEGA GATE WEGA GATE provides one button access for controlling your TV. It enables you to perform a variety of tasks intuitively with a control panel on me screen rather than a variety of remote control button presses. When you press the _ button, you can select t)'otn basic TV function: selecting from Favorite Channels. watching TV. viewing external equipment signals or adjusting TV settings. 1 Press WEGA GATE on the remote WEGA GATE control panel appears.
Introducing WEGA GATE The WEGA GATE screen gives you access to the following The Favorites \._ channels items: feature lets vou selec! programs that you specify. For details, from a list of up to 16 favorite see page 57. Favorites The Cable feature takes you to the most recentl} viewed channel on the cable input. When tuned to the channel, the Program Banner and Channel number will be dis played. When this feature is active. © is displayed to the left of the icon.
Introducing Navigating and Selecting Use your remote control to navigate WEGA GATE Items through WEGA GATE and tile settings. Display WEGA GATE control panel Press WEGA GATE. Display Settings Press WEGA GATE and select Settings. Move through Settings Press tl. !l_I, ,_,. Select an oPtion to chang e................................................................ Press @. ................. Move back to upper layer Press RETURN. Selec t (confirm)changed Setting ................................
Introducing WEGA GATE I_ Using Cable in WEGA GATE The Cable feature takes you to tile most recently viewed channel on tile cable input. When tuned to the channel, the Prograln Banner and Channel number will be displayed. Select Cable from the WI:::GA GATE control panel and press @. L_ If you have not Completed the initial channel setup (see page 32) both Cable and Antenna will tune to the lowest channel number. To run Initial Setup see page 72.
Introducing WEGA GATE Using External Inputs in WEGA GATE The External Inputs feature lets you view froln a selected external input connected to your TV. You can assign a label or skip over unused inputs by selecting Edit Video Labels. [nput label assignment can also be done by going to Setup settings and select Label Video Inputs (see page 79). 1 Select External Inputs from the WEGA GATE control panel and press O. The External Inputs list appears. Make your selection.
Overview The Settings give you access to the following features: (Depending on the signal tuned, you may see a different Setting your screen. Settings displayed here are with the 720p signal.) Video Audio Screen Picture Mode (page 63) Reset (page (,3) Iris (page 63) Picture (page (,3) Brightness (page 63) Color (page 63) Hue (page 63) options on DRC Mode (page 64) DRC Palette (page 64) Advanced Video (page (,5) Color Temp. (page 64) Sharpness (page 64) ,_" Noise Reduction (page 64) '_..
Using the Settings Channel Favorite Channels (page 72) Digital Channels (page 72) Auto Program (page 72) Show/Hide Channels (page 72) Label Channels (pt_ge73) Parental Lock Parental Lock (page 74) Change Password (page 75) Select Country (page 75) !!i_, R Setup Caption Vision (page 78) Info Banner (page 78) Game Mode (page 78) Label Video Inputs (page 79) Language (page 79) Video 2 (Component) (page 79) Menu Color (page 79) Image Shift (page 79) High Altitude (page 80) CineMotion (page 80) Applicati
Using the Settings Accessing 1. Press WEGA the Video Settings GATE ....... 2. Select Settings .............. ____ 3. Highlight ...................... 4. Press to select ............... To highlight an option and to change settings, press tl. ,I, I. *. Press @ to confinn the selection. To exit the Video, press _. Selectmg OpHons Wdeo The Video settings Picture Mode "_°To quickly and easily change from one Picture Mode to another, use PICTURE on the remote control.
Using the Settings Color Temp. Choose from four color temperatures: White inter_sity adjuxtmer, t Cool ......................... Select to give the white col0rs i; biue iint. .................. ........................................................................................................... Neutral ................. Select to g!ve tl}e whi!e colors a neutraI ti!}t" Warm 1,2 When selected Custom in Picture Mode, select to give the white colors a red tint.
Using the Settings Advanced Video Available in "Custom Picture Mode" Selecting Options PC Video Program Select Program to choose among the options: Black Corrector (High/Medium/Low/Off), Advanced Iris (High/Medium/Low/Off), Gamma (Max/High/Medium/Low/Off), Clear White (High/Low/Off), Live Color (High/Medium/Low/Off). To display the PC screen: Press TV/VIDEO repeatedly remote control until VIDEO on the 7 (PC) appears.
Using the Settings Accessing the Audio Settings 1. Press WEGA GATE ........ 2. Select Settings ............... _ 3. Highlight ........................ 4.Press to select ................ To highlight Press @ an option to confirm To exit the Audio, Selectmg OpHons and to change settings, press tl. !1,I. *. the selection. press _._. Audio "_° Sound Mode settings are independent of settings in the Treble/Bass options.
Using the Settings MTS Stereo Select for stereo Enjoy stereo, bilingual and broadcast Auto SAP Select to automatically /mmo programs programs' Select for mono during _ MTS weak is available On a program switch to second is received. the TV remains reception. audio (If no SAP in Stereo (Use to reduce mode.) noise stereo broadcasts.) only for analog programs. Select to turn on the TV speakers.
Using the Settings Selecting Options PC Audio To display the PC screen: Press TV/VIDEO repeatedly remote control until VIDEO appears. on the 7 (PC) L_ You can change the settings for the PC input while the rv is displaying the PC screen. Tile PC Input Sound Mode Audio setting includes tile following Dynamic Select to enhance Standard Suitable Custom Flat setting. treble and bass. for spoken dialog.
Using the Settings Accessing the Screen Settings 1. Press WEGA GATE ........ 2. Select Settings ............... [_ 3. Highlight ....................... 4.Press to select ................ To highlight Press @ an option to confirm To exit the Screen, Selecting Options and to change Screen (page press 4, ,I, I. *. press _.,_. ";_"Wide Mode is unavailable while Freeze settings, the selection. 54).
Using the Settings "_° If 4:3 Default is set to anything but Off, the Wide Mode setting changes only for the current channel. When you change channels (or inputs), Wide Mode is automatically replaced with the 4:3 Default setting. To retain the current Wide Mode setting as channels and inputs are changed, set 4:3 Default to Off. 4:3 Default Wide Zoom Select the d@mlt s'creen mode to use for 4:3 s'ources, Select to enlarge screen, keeping possible.
Using the Settings Selecting PC Screen Options To display the PC screen: Press TV/VIDEO repeatedly remote control until VIDEO appears. on the 7 (PC) "_°When there is no signal input, all settings are not available. La You can change the settings for the PC input while the TV is displaying the PC screen. The PC Input Screen ";_°Select Zoom in the Wide Mode option to display movies and other content on DVD, using the entire viewable area of the screen.
Using the Settings Accessing the Channel Settings 1. Press WEGA GATE ........ 2. Select Settings ............... _==J 3. Highlight ....................... 4.Press to select ................ To highlight an option and to change Press @ to confirm the selection. To exit the Channel, press _. Selectmg OpHons Channel "_°Channels that you set to Hidden can only be accessed with the 0-9 buttons. settings, press tl. ,I, <. *.
Using the Settings Y_ If you select to hide or show a major digital channel, all the subchannels are automatically hidden or shown. To show or hide an individual sub-channel within a digital channel, you must _ If you hide all sub-channels channel Label Channels is automatically of a major Allows you to assign channel nmnbers. 1 Press digital labels (such as station tF or ,!, to scroll through 3 Press tF or tf, to scroll through number to select Repeat to the label.
Using the Settings Accessing the Parental Lock Settings 1. Press WEGA GATE ........ 2. Select Settings .............. ___===J 3. Highlight ....................... 4.Press to select ................ To highlight Press @ an option to confirm To exit the Parental The Parental setting and to change settings, press i. ,I, <. *. the selection. Lock, press _. allows you to set up the TV to block programs according to their content and rating levels.
Using the Settings "_°If you are not familiar with the Parental Guideline rating system, you should select Child, Youth, or Y.Adult to help simplify the rating selection. To set more restrictive ratings, select Custom. Change Password Select to change your password. Select Country U.S.A. Select to use U.S.A. ratings (see page 76). Canada Select to use Canadian ratings (see page 77). To deactivate the parental control feature [] Set Parental Lock to Off when in tile Parental Lock setting.
Using the Settings Selecting Custom Rating Options "_'To ensure blocking US custom rating options If you selected U.S.A. as the country of residence on page 75, the Custom Rating setting includes the following options. (If you selected Canada, see page 77.) maximum capability, the age-based ratings should be blocked. Movie Rating G All children PG Parental guidance suggested. PG-13 Parental guidance for children R Restricted viewing, parental for children under 17.
Using the Settings Canadian custom rating options If you selected Canada as tile country of residence on page 75, the Custom Rating setting includes the following options. (If you selected U.S.A., see page 76.) English Rating French Rating U.S.A. Rating C All children. 08+ Children 8 years and older. G General programming. PG Parental guidance. 14+ Viewers 14 and older. 18+ Adult progralnming. G General programlning. 8 ans+ Not recommended t_r ages under 8.
Using the Settings Accessing 1. Press WEGA 2. Select Settings the Setup Settings GATE ........ .............. 3. Highlight ....................... 4.Press to select ................ To highlight Press @ an option to confirm To exit the Setup, and to change settings, press tl. ,!, I. *. the selection. press _.
Using the Settings Label Video Allows Inputs connected to the TV so you can identify TV/VIDEO. When in this setting: 1 you to label the audio/video Press tF or If, to highlight to select it. equipment you have them when using an input to label, then 2 Use the arrow buttons 3 Press @ to select the equipment you connected the input jacks on the back of your TV. to scroll through the labels. Select Skip if you do not have any equipment a particular input.
Using the Settings Programming Caption Vision High Altitude Select On to use the TV at an altitude of 5,000 feet ( 1,500111)or higher. Select Off to use the TV at nonnal altitude. CineMotion Select Auto to optimize the screen display automatically detecting fihn content and applying a reverse 3-2 pulldown process. Moving picture will appear clearer and more natural looking. Select Off to disable the detection.
Using the Settings Selecting Options PC Setup To display the PC screen: Press TV/VIDEO repeatedly remote control until VIDEO appears. on the 7 (PC) L_ You can change the settings for the PC input while the rv is displaying the PC screen. Tile PC Input Power Management Setup setting includes On tile following options: 2 Select to automatically switch to the Power Saving mode when there is no signal input for l 0 minutes. _" Off ..........................................
Using the Settings PC Input Signal Compatibility Chart Resolution Horizontal Signals Horizontal x (Dot) VGA Vertical Vertical frequency (kHz) VESA t_equency standard (Hz) (Line) 640 x 480 31.5 60 640 x 480 37.5 75 640 x 480 43.3 85 -* i/ .............................................................................................................................................................. 720 x 400 31.5 70 SVGA XGA** WXGA** x 600 35.2 56 800 x 600 37.
Using the Settings Accessing the Applications Settings 1. Press WEGA GATE ........ 2. Select Settings .............. 3. Highlight ....................... 4.Press to select ................ To highlight an option and to change settings, press tl. ,!, I. *. Press @ to confirm the selection. To exit the Applications, press _.
Using the Settings 2 Press tF or 4 to highlight one of the following options, then press 3 @. Program Select to set the Timer by clay, time, duration, and channel. Off Select to turn off the Timer. (Your previous settings are saved.) Program in If you selected day(s), hour, minute, step 2, press tF and tf, to set the AM/PM, duration, and channel number. Press @ or press * to confirm move to the next setting. Press I. to go back to the previous 4 Press WEGA GATE to exit the setting screen.
Overview This chapter Contacting includes the following topics: Contacting Sony 85 Replacing the Lamp 86 Troubleshooting 90 Specifications 94 Optional accessories Index 95 96 Sony If, ariel" reading these operating instructions, you have additional questions related to the use of your Sony television, please call our Custolner Information Services Centel: For US residents: 1-800-222-SONY (7669) or visit: http://www.sonystyle.com/tv/ For Canadian residents: 1-877-899-SONY (7669) _.
Other Information Replacing the Lamp The projection lamp, which illuminates If tile screen becomes the picture, has a limited dark, tile color looks unusual, life. or the LAMP indicator on the front of the TV flashes, it is time to replace the lamp with a new one (not supplied). _\ WARNING Electric appliances can cause fire or high temperature, resulting in injury or death. Be sure to follow the instructions below.
Other Information 4 Remove the outside lamp cover. J 5 Remove tile lamp door. Turn tile knob counterclockwise ..... to OPEN and pull out tile covel: door 0 6 Pull out tile lamp. Hook a finger through tile loop of the lamp handle upwards. Then pull the lamp straight out. and pull the handle o L_The lamp is Very hot immediately after usel Never touch the glass portion of the lamp or the surr0unding partsl _ After the used lamp has cooled, place it into the empty box of the replacement lamp.
Other Information 7 Put tile new lamp into its place. Mount tile new lamp securely. Failure to do so may cause a fire or tile screen to go dark. /_ If the lamp is not securely reattached, the self-diagnostic function may be triggered and the POWER/STANDBY indicator flashes three times (see page 12). 8 Reattach the lamp dool: Turn tile knob back to CLOSE 9 Put tile outside _ lamp cover back in its place. Take great care when replacing the lamp or plugging in!unplugging the connecting cords.
Other Information The used lamp This product contains mercury. Disposal of this product may be regulated sold in the United States. For disposal or recycling information, please contact your local authorities or the Electronics Industries Alliance (htt p://www.eiae.org). [] Do not leave the used lamp near flammable materials or within the reach of children. [] if Do not pour water onto the used lamp or put any object inside the lamp. Doing so may cause the lamp to burst.
Other Information Troubleshooting Remote Remote Control control does not operate [_ The batteries [_ Check could be weak. [_ Press TV (FUNCTION) the orientation Replace once, and the TV indicator inadvertently pressed SAT/CABlE control to SAT or CABLE mode.
Other Information Video No picture sound (screen not lit), no _ If your TV does not turn on and a red light keeps service. Call your local Sony Service Center. flashing, your TV may need Make sure the power cord is plugged in. Press POWER on the front of the TV. [_ Press TV/VI DEO to cycle through [_ Try another Dark, poor or no picture _ Adjust the Picture (screen _ Adjust the Brightness option in the Video setting Check the antenna/cable connections.
Other Information Audio Good picture, no sound [_ [_ Press MUTING Make sure the [_ Make sure the MTS option I_ When the HDMI cannot PCM. Audio noise [_ so that Muting disappears t}om the screen (see page 44). option is set to On ill the Audio setting (see page 67). Speaker be input. Change Communication is set to Stereo or Mono IN input is in use, surround the sound problems setting may occur sound, (see page 67).
Other Information General How to reset TV to Ii_ctory settings _ Turn on the TV. While holding down the t button on the remote control, press the POWER button on the TV. (The TV will turn itself off, then back on again.) Release the t button. WARNING: including How to restore Video settings The Factory Parental Reset lock will clear all of your customized settings setting. _ Select Reset setting option while in the Video setting (see page 66).
Other Information Specifications Projection System 3 LCD Paneisl i iens projeciion sysiei_a ........ LCD Panel Projection Lens Antenna 0.73 inch TFT LCD panel (1,280 x 720 pixels) High Perfonnance, large diameter hybrid lens F2.4 75-ohm external terminal %r VHF/UHF Lamp ..... i00Wl X_2_00 Television System NTSC ..................................
Other Information Dimensions ......................................... (W/H/D) K[)F:_2Ai0:999 ii_il_ (39 3_8 KDF-E50AI0:1184 Mass Supplied i)8 inci{esi ...................... × 827 x 408 mm (46 5/8 x 32 5/8 × 16 1/8 inches) KDF-E42AI0:28 kg (61 lb. 12 oz.) KDF-E50AI0:33 kg (72 lb. 13 oz.
0-9 buttons 4:3 Default 44 70 5.
L R Label Channels 73 Label Video Inputs 79 LAMP LED 15 Ratings setting 76 viewing blocked programs 75 Remote control Lamp, replacing 86-89 Language 79, 81 Live Color 65 inserting batteries 43 programming 47-48 Removing channels tiom the channel list 72 IV! Removing the CableCARD 31 Reset 63, 65, 66, 68 MENU button 45, 49 Menu Color 79, 81 Movie Rating 76 MTS 67 MUTING button 44 $ S VIDEO jack, described 18 Satellite receiver connecting 25 Satellite receiver, using with remote control 49 N Noise R
2597544121 http ://www. sony.
