Wall-Mount Bracket: SU-WL855

− 14 (US) −
2 Align
WM1
to the wall and make
four marks.
× 4
WM1
Note

Use a level to check whether
WM1
is level.
3 Drill pilot holes on the marks.
Make sure the location on the wall to drill
the holes are strong enough to support a
weight of at least six times that of the TV or
LCD Display.
× 4
75 mm
(3 inch)
10 mm
(13/32 inch)
Note

Pilot holes must be drilled to a depth of 75mm
(3inch), using a 10mm (13/32inch) diameter drill
bit.
4
WA1
5 Install
WM1
on the wall.
WS2
WW1
WM1
Note

Use a level to check whether
WM1
is level.
Precaution

Do not over-tighten lag bolts
WS2
. Improper
tightening could reduce the holding power of lag
bolts
WS2
.
6 Pull out the arm of the bracket to
the end.