Help Guide

HelpGuide
InterchangeableLensDigitalCamera
ILCE-9 α9
CleaningMode
Ifdustordebrisgetsinsidethecameraandadherestothesurfaceoftheimagesensor(thepartthatconvertsthelight
toanelectricsignal),itmayappearasdarkspotsontheimage,dependingontheshootingenvironment.Ifthis
happens,followthestepsbelowtocleantheimagesensor.
Hint
Forhowtochecktheamountofdustontheimagesensor,andforfurtherdetailsoncleaningmethods,pleaserefertothefollowing
URL.
http://support.d-imaging.sony.co.jp/www/support/ilc/sensor/index.php
Note
Cleantheimagesensorquickly.
Ablowerisnotsuppliedwiththisproduct.Useacommerciallyavailableblower.
Makesurethattheremainingbatterylevelis
(3remainingbatteryicons)ormore,beforeperformingthecleaning.Theuseof
ACadaptor(supplied)isrecommended.
Donotuseaspraytypeblowerasitmayscatterwaterdropletsinsidethecamerabody.
Confirmthat thebatteryhasbeenchargedsufficiently.
1
MENU→
(Setup)→[CleaningMode]→[Enter].
Theimagesensorvibratesalittletoshakeoffthedust.
2
Turnofftheproductfollowingtheinstructionsonthescreen.
3
Detachthelens.
4
Usetheblowertocleantheimagesensorsurfaceandthesurroundingarea.
5
Attachthelens.
6
537