Help Guide

Table Of Contents

Interchangeable Lens Digital Camera

ILCE-7/ILCE-7R

Shutter Priority

You can express the movement of a moving subject in various ways by adjusting the shutter speed, for

example, at the instant of the movement with high speed shutter, or as a trailing image with low speed shutter.

The shutter speed can be changed while recording movies.

1. Set the mode dial to S (Shutter Priority).

2. Select the desired value by turning the front dial.

3. Adjust the focus and shoot the subject.

The aperture is automatically adjusted to obtain proper exposure.

Note

If proper exposure cannot be obtained after setup, the aperture value on the shooting screen blinks.

Although you can shoot as it is, resetting is recommended.

Use a tripod to prevent blurring when you use a slow shutter speed.

The / (SteadyShot warning) indicator does not appear in shutter speed priority mode.

When the shutter speed is 1 second(s) or longer, noise reduction will be done after shooting for the same

amount of time that the shutter was open. However, you cannot shoot any more while noise reduction is in

progress.

The brightness of the image on the monitor may differ from the actual image being shot.

Hint

When a faster shutter speed is used, moving subjects, such as a running person, cars, or sea spray appear

as if they are stopped. When a slower shutter speed is used, a trailing image of the movement of the subject

is captured to create a more natural and dynamic image.