Help Guide

Flash/ Underwater Auto: When you select a light source that illuminates the subject, the

product adjusts the color tones to suit to the selected light source (preset white balance). When

you select [Auto], the product automatically detects the light source and adjusts the color tones.

C.Temp./Filter:

Adjusts the color tones depending on the light source. Achieves the effect of CC (Color

Compensation) filters for photography.

Custom 1/Custom 2/Custom 3:

Uses the white balance setting saved in [Custom Setup].

Custom Setup:

Memorizes the basic white color under the light conditions for the shooting environment.

Select a memorized custom white balance number.

Hint

You can display the fine adjustment screen and perform fine adjustments of the color tones as

required by pressing the multi-selector right.

If the color tones do not come out as you expected in the selected settings, perform [WB bracket]

shooting.

or is displayed only when [Priority Set in AWB] is set to [Ambience] or [White].

Note

[White Balance] is fixed to [Auto] in the following shooting modes:

[Intelligent Auto]

If you use a mercury lamp or a sodium lamp as a light source, the accurate white balance will not be

obtained because of the characteristics of the light. It is recommended to shoot images using a flash

or select [Custom Setup].

[110] Shooting White balance

Priority Set in AWB

Selects which tone to prioritize when shooting under lighting conditions such as incandescent

light when [White Balance] is set to [Auto].

Menu item details

Standard:

Shoots with standard auto white balance. The camera automatically adjusts the color tones.

MENU →

(Camera Settings1) → [Priority Set in AWB] → desired setting.