Help Guide (Web manual)

Note
During manual recording, the VOR function does not work.
Related Topic
Recording automatically in response to the input sound volume – the VOR function
Press or to select the optimum recording volume level for the sound source.
You can check the current recording volume level on the peak level meters. Adjust the recording volume so that the
recording volume level stays around -12 dB, which fits within the optimum range (
).
If too loud sounds are detected during recording, “OVER” (
) appears on the display window and the peak indicator lights.
In such a case, turn down the recording volume by pressing
until “OVER” disappears and the peak indicator goes out to
avoid sound distortion.
You can press and hold or to keep turning up or down the recording volume.
5
Turn on the LIMITER function if needed.
Select “LIMITER” on the OPTION menu, and then select “ON.” [Details]
6
Press
REC/PAUSE to start recording.
7
Press
STOP to stop recording.
8
56