Manualshelf

Help Guide (Web manual)

ManualsBrandsSony ManualsCoffee MakersICD-SX2000
41424344454647484950
Help Guide
IC Recorder
ICD-SX2000
Disconnecting the IC recorder from the USB AC adaptor
Be sure to follow the procedure below, otherwise you may not be able to play the files stored on your IC recorder due to data
corruption.
Note
While recording is in progress (the recording indicator lights in red) or paused (the recording indicator flashes in red), or while data is being
accessed (the message is on the display window), observe the following to avoid data corruption:
Do not connect/disconnect your IC recorder to/from the USB AC adaptor while the adaptor is connected to an AC outlet.
Do not connect/disconnect the USB AC adaptor to/from an AC outlet while your IC recorder is connected to the adaptor.
Related Topic
Charging the battery with the USB AC adaptor
4-579-964-32(1) Copyright 2016 Sony Corporation
If recording or playback is in progress, press STOP to stop the IC recorder.
1
Make sure that “Accessing” is not on the display window.
2
Disconnect the IC recorder from the USB AC adaptor, and then disconnect the USB AC adaptor from
the AC outlet.
3
26