User manual

99
Using the Menu
(OTHERS) menu
Settings while recording or other basic
settings (AREA SET/BEEP, etc.)
The default settings are marked with B.
See page 81 for details on selecting
menu items.
You can save up to 99 camera profile
settings in a memory card for easy recall at
any time.
In addition, if you should require multiple
camcorders with the same settings, you can
load the desired settings to all cameras via
the memory card.
b Notes
• The file may not be shown properly if the file
name is changed on the computer, or the power
turned off during generation.
• Formatting the memory card also deletes saved
camera profiles.
z Tips
• Items that can be saved include setting values
for menus, picture profiles, buttons, etc. You
can save these setting values all together in the
camera profile.
x LOAD
Load the camera profile, and execute the
settings.
1 Select the camera profile to be loaded
with the SEL/PUSH EXEC dial.
2 Select [YES] on the confirmation
screen.
The camcorder restarts, and the loaded
camera profile becomes effective.
b Notes
• A camera profile saved on a camcorder with
different model name, or edited on a computer
cannot be loaded.
Press the MENU button t select
(OTHERS) with the SEL/PUSH
EXEC dial.
CAMERA PROFILE
x SAVE
You can save the camera profile.
1 Select [NEW FILE] or an existing
profile name with the SEL/PUSH
EXEC dial.
2 Select [YES] on the confirmation
screen.
The camera profile is saved.
z Tips
• When you select [NEW FILE], the profile is
named [01] (when saving for the first time).
• If you select an existing camera profile, the
current setting values are overwritten.
• You cannot use a computer to edit saved
settings.
x DELETE
You can delete the saved camera profile.
1 Select the camera profile to be deleted
with the SEL/PUSH EXEC dial.
2 Select [YES] on the confirmation
screen.
See page 62.
See page 23.
You can adjust a time difference without
stopping the clock. When you use your
camcorder abroad, you can adjust the clock
to the local time.
You can change this setting without
stopping the clock. Set to [ON] to move the
time forward 1 hour.
B OFF
Does not set the summertime.
ASSIGN BUTTON
CLOCK SET
AREA SET
SUMMERTIME
Continued ,