User manual

113
Troubleshooting
(Warning indicator pertaining to
the external media device)
• The image database file may be
damaged (p. 80).
• The external media device is damaged.
(Warning indicator pertaining to
formatting of the external media
device)
• The external media device is damaged.
• Disconnect the external media device
once, and format it on a computer. Note
that if you format the external media
device, all the recorded movies and still
images are deleted.
• If the same warning message is
displayed after formatting the external
media device, the device may be
incompatible with your camcorder, or
damaged. Replace it with a new one.
* When [BEEP] is set to [ON] (p. 100), you hear a
melody when the warning indicators appear on
the LCD screen.
If messages appear on the LCD screen or in
the viewfinder, follow the instructions.
Recording media
Inconsistencies found in image
database file. Do you want to repair
the image database file?
Inconsistencies found in image
database file. Cannot record or play
HD movies. Do you want to repair the
image database file?
• You cannot record or play back movies
because no movie management
information exists. If you touch [OK],
new management information is
created and you can record or play back
movies.
Inconsistencies found in the image
database file. Back up and recover.
Recover, then import using the
included PC software.
• Inconsistencies occur in the image
database file because high definition
image quality (HD) movie management
information is damaged. If you touch
[OK], new management information is
created by backing up a high definition
image quality (HD) movie. The backed
up movies cannot be recognized. If you
connect to a computer that has been
installed with the software “Content
Browser,” you can copy the backed up
high definition image quality (HD)
movies.
Buffer overflow. Writing to the media
was not completed in time.
• You have performed recording and
erasing operations repeatedly, or a
memory card that has been formatted
by other device is used. Copy and take
data backup to other device (such as a
computer), and then format the memory
card on the camcorder (p. 78).
• The size of the inserted memory card is
not sufficient for copying the movie(s).
Use the recommended memory card
(p. 25).
Recovering data.
• Your camcorder tries to recover data
automatically if the data writing was
not performed properly.
Cannot recover data.
• Writing data onto the media of the
camcorder has failed. Attempts were
made to recover the data, but they were
unsuccessful.
Description of warning messages
Continued ,