2-689-456-13(1) Bluetooth™ Wireless Audio Adapter (Transmitter / Receiver) Operating Instructions HWS-BTA2W ©2006 Sony Corporation
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus.
Table Of Contents Features ..................................... 4 Using as a receiver .............................. 5 Using as a transmitter .......................... 6 Unpacking .................................. 7 Location and Function of Parts ........................................ 8 Using the stand .................................... 9 On Pairing ................................ 10 On Indicators ........................... 10 Using as a Receiver ................ 11 Preparation ..................
Features This unit is an audio adapter which can be used in two ways: as a stereo wireless receiver or transmitter, using BLUETOOTH wireless technology. You can enjoy stereo audio signal transmission (receive/transmit) of the BLUETOOTH wireless technology by using your stereo audio devices. As a receiver This unit can receive stereo audio signal from a BLUETOOTH stereo audio source device (mobile phone, digital music player, etc.) *.
Using as a receiver In the example below, we explain how to receive music played on a BLUETOOTH mobile phone with the music playback function on this unit and listen to music on a stereo system connected to this unit. Pairing Enables a BLUETOOTH mobile phone and this unit to recognize one another. Pairing BLUETOOTH mobile phone This unit Stereo audio output device For more details, see pages 10 and 12. v BLUETOOTH connection Operate the BLUETOOTH mobile phone to make the BLUETOOTH connection.
Using as a transmitter In the example below, we explain how to transmit music played on your computer connected to this unit and listen to music on a BLUETOOTH stereo audio receiving device (headphone, stereo audio system, etc.). Pairing Enables a BLUETOOTH stereo audio receiving device and this unit to recognize one another. Pairing Computer BLUETOOTH stereo audio receiving device This unit For more details, see pages 10 and 16.
GETTING STARTED Unpacking Check that you have the following items: • BLUETOOTH Wireless Audio Adapter (1) • Connecting cable (stereo mini plug y stereo mini plug), 1.0 m (1) • Operating Instructions (1) • Stand (1) Tip See page 9 on how to use the stand.
Location and Function of Parts RXTX ID S ET AUDIO IN LINE OUT 1 TX/RX (transmitter / receiver) switch For switching between transmitter and receiver. 2 1 (power) button Press to turn on the unit. Press a little longer to turn off the unit. 3 1 (power) indicator (communication status) 4 indicator 5 DC IN 4.5 V jack 6 LINE OUT (audio output) jack Connects to the LINE IN jack of a stereo component system, radiocassette recorder, etc.
Using the stand Attach the supplied stand to install this unit vertically, following the procedure below. 1 Align the rail of the stand with the groove of this unit. Groove Rail 2 Slide this unit along the groove until this unit stops. Notes • When not using the stand, do not lay this unit on its side on a desk made of metal. • Do not use the stand in a car, since the temperature may become high depending on the condition.
On Pairing What is pairing? BLUETOOTH devices need to be “paired” with each other beforehand. Once BLUETOOTH devices are paired, there is no need for pairing again, except in the following cases: • Pairing information is deleted after repair, etc. • This unit is paired with 9 or more devices. This unit can be paired with up to 8 BLUETOOTH stereo audio receiving device and transmitting device.
OPERATING THE UNIT Using as a Receiver Used as a receiver, this unit receives music transmitted from a BLUETOOTH stereo audio source device. Example BLUETOOTH mobile phone or other BLUETOOTH stereo audio source device This unit Stereo audio output device Note For details on how to operate the devices to be connected, refer to the operating instructions supplied with each device.
Pairing Check the following before operating the unit. – The TX/RX switch is set to “RX.” – This unit is connected to a power source and the 1 indicator (green) goes off. 1 Press and hold the ID SET button for 7 seconds or more. When the 1 indicator (green) and indicator (blue) start flashing together, release the button. This unit enters pairing mode. Note Pairing mode is cancelled and this unit is turned off after about 5 minutes.
4 If Passcode* input is required on the display of the BLUETOOTH stereo audio source device, input “0000.” * Passcode may be called “Passkey,” “PIN code,” “PIN number,” or “Password.” 5 Start the BLUETOOTH connection from the BLUETOOTH device. Some BLUETOOTH stereo audio source devices may connect with the unit automatically when pairing is complete.
Receiving Check the following before operating the unit. – The TX/RX switch is set to “RX.” – The BLUETOOTH stereo audio source device’s BLUETOOTH function is on. – Pairing of this unit and the BLUETOOTH stereo audio source device is complete. 1 2 Press the 1 button to turn on this unit. 3 Start the BLUETOOTH connection from the BLUETOOTH stereo audio source device. 4 Start playing on the BLUETOOTH stereo audio source device.
Using as a Transmitter This unit transmits music played on a stereo audio source device connected to this unit to a BLUETOOTH stereo audio receiving device. Example Computer or other stereo audio source device BLUETOOTH stereo audio receiving device This unit Note For details on how to operate the devices to be connected, refer to the operating instructions supplied with each device.
Pairing Check the following before operating the unit. – The TX/RX switch is set to “TX.” – This unit is connected to a power source and the 1 indicator (green) goes off. 1 Press and hold the ID SET button for 7 seconds or more. When the 1 indicator (green) and indicator (blue) start flashing together, release the button. This unit enters pairing mode. Note Pairing mode is cancelled and this unit is turned off after about 5 minutes.
Transmitting Check the following before operating the unit. – The TX/RX switch is set to “TX.” – The BLUETOOTH stereo audio receiving device’s BLUETOOTH function is on. – Pairing of this unit and the BLUETOOTH stereo audio receiving device is complete. 1 2 Press the 1 button to turn on this unit. Prepare the BLUETOOTH stereo audio receiving device to be connected within 5 minutes after turning on this unit. This unit turns off 5 minutes after turning on without making the BLUETOOTH connection.
ADDITIONAL INFORMATION Precautions On BLUETOOTH communication • BLUETOOTH wireless technology operates within a range of about 10 meters (about 30 feet). Maximum communication range may vary depending on obstacles (person, metal, wall, etc.) or electromagnetic environment. RX TX ID SET This unit Steel cabinet Optimal performance Limited performance • The following conditions may affect the sensitivity of BLUETOOTH communication.
On safety • Do not drop, hit, or otherwise expose the unit to strong shock of any kind. This could damage the product. • Do not disassemble or attempt to open any parts of the unit. On the supplied AC power adaptor • Use the AC power adaptor supplied with this unit. Do not use any other AC power adaptor since it may cause the unit to malfunction. On placement • Do not place the unit in any of the following locations.
What is BLUETOOTH technology? BLUETOOTH wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer or digital camera. BLUETOOTH wireless technology operates within a range of about 10 meters (about 30 feet). Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time.
Troubleshooting If you run into any problems using this unit, use the following checklist. Should any problem persist, consult your nearest Sony dealer. When using as a receiver When using as a transmitter No sound No sound , Check the connection between this unit and the stereo audio output device connected to this unit. , Check that both this unit and the BLUETOOTH stereo audio source device are turned on.
Distorted sound , Turn down the volume of the stereo audio source device to the point where the sound is no longer distorted. For details on volume adjustment, refer to the operating instructions supplied with the stereo audio source device. , If the AUDIO IN jack of this unit is connected to the LINE OUT jack of the stereo audio source device, connect it to the headphone jack. Be sure to connect this unit to the headphone jack of the stereo audio source device to be connected.
Specifications General Supplied accessories Communication System BLUETOOTH Specification version 2.0 AC power adaptor (1), Stand (1), Connecting cable (stereo mini plug y stereo mini plug), 1.0 m (1) Output BLUETOOTH Specification Power Class 2 Maximum communication range Line of sight approx. 10 m (30 ft)*1 Optional accessories Frequency band 2.4 GHz band (2.4000 GHz – 2.4835 GHz) Car Battery Cord: DCC-E345 Connecting cable: RK-G129 (Stereo mini plug y Phono plug × 2, 1.
Printed in Malaysia
