Specifications
The sync terminal can function as either an input or an output. As an input it can receive the
trigger signal from a ash meter when setting up exposure, for example. As an output it can relay
the ash trigger to an external monobloc ash or similar for expanded multi-ash versatility.
Flash ready beep
A “ready” beep informs the user when the ash has fully recharged and is ready for the next
exposure, even when using wireless ash.
Remote release
The remote release function can be used to remotely activate a camera shutter in
synchronization with one or more ash units, making it possible to simultaneously shoot a single
subject from multiple angles, using multiplew cameras and ash combinations.
Multi/Micro USB ports
Specications
Common Information / Operating Instruction
Language
English
French
Operating Instruction
Form Separate
Package
Form Color carton
Guide No.
Guide No. 60 (Flash coverage setting 200mm/STD ash distribution,ISO100・m)
Recycling time
Recycling time
0.1-2.5 seconds(Alkaline battery)/0.1-1.7 seconds (Ni-MH battery)
* The recycle time is the fastest time from when the ash is emitted until the TEST
button lights up.(Sony test conditions)
Flash compensation
Flash compensation
Yes *
*Depending on the camera,this function is not available.For details,see product
information page.http://support.d-imaging.sony.co.jp/www/cscs/accessories/
Flash
Number of Flashes
More than 150 times(Alkaline battery)/More than 220 times(Ni-MH battery)
*The number of ashes is the number of times that maximum light output can be
emitted once in 30 sec.(Sony test conditions)
Continuous ash performance: 40 ashes at 10 ashes per second *
*Normal ash, power level 1/32, 105mm, Ni-MH battery.
Flash Coverage
AUTO/MANUAL(20mm-200mm)Angle of view at 14mm focal length is also covered
with the wide panel
Flash Modes TTL / Manual / Multi
Operating Conditions
Color Temperature Control 5500K
Type
Type Auto electronic ash (clip-on type) with pre-ash metering
Color Black
Dimension (Approx.) 3 1/8 × 5 1/2 × 4 1/8 inches (78. x 139.5 x 104.6 mm) (WxHxD)
Material PC+ABS
Operating Temperature 32°F to 104°F (0・ to +40・ )
Storage Temperature -4°F to 140°F (-20・ to 60・)
Weight (Approx.) 15.9 oz (449 g) (only main unit)
Flash Specication





