User Manual
Table Of Contents
- US
- About Manuals of the Speaker System
- What You Can Do with the Speaker System
- Guide to Parts and Controls
- Using the Home Menu
- Setting Up
- Watching Images
- Listening to Music/Sound
- Listening to Music by Connecting to a Network
- Adjusting the Volume and Sound Quality
- Adjusting the Volume
- Enjoying Immersive Surround Experience (IMMERSIVE AE)
- Setting the Sound Effect That Is Tailored to Sound Sources (Sound Mode)
- Making Dialogs Clearer (VOICE)
- Enjoying Clear Sound with Low Volume at Midnight (NIGHT)
- Adjusting the Delay Between the Picture and Sound
- Enjoying Multiplex Broadcast Sound (AUDIO)
- Adjusting the Dialog Volume While the DTS:X Content is Played Back
- Using the Speaker System by Interlocking with a TV
- Changing the Settings
- Troubleshooting
- Additional Information
- FR
- À propos des manuels du système d’enceintes
- Ce que vous pouvez faire avec le système d’enceintes
- Guide des pièces et des commandes
- Utilisation du menu d’accueil
- Installation
- Visualisation d’images
- Écoute de la musique/du son
- Écoute du son d’un téléviseur Sony à l’aide de la fonction BLUETOOTH®
- Écoute de la musique/du son avec la fonction BLUETOOTH
- Écoute de la musique stockée sur un dispositif USB
- Écoute du dispositif connecté avec un câble audio analogique
- Écoute du son du téléviseur ou du dispositif connecté en utilisant un casque
- Écoute de la musique par connexion à un réseau
- Réglage du volume et de la qualité du son
- Réglage du volume
- Profiter de l’expérience surround immersive (IMMERSIVE AE)
- Réglage de l’effet sonore personnalisé pour différentes sources sonores (mode son)
- Rendre les dialogues plus audibles (VOICE)
- Profiter d’un son clair associé à un niveau de volume réduit durant la nuit (NIGHT)
- Réglage de l’écart temporel entre l’image et le son
- Profiter d’un son de diffusion multiplex (AUDIO)
- Réglage du volume des dialogues pendant la lecture de contenus DTS:X
- Utilisation du système d’enceintes par interverrouillage avec un téléviseur
- Modification des réglages
- Dépannage
- Informations complémentaires
- ES
- Acerca de los manuales del sistema de altavoces
- Qué puede hacer con el sistema de altavoces
- Guía de piezas y controles
- Funcionamiento del menú Home
- Configuración
- Reproducción de imágenes
- Escuchar música/sonido
- Escuchar música conectándose a una red
- Ajuste del volumen y calidad de sonido
- Ajuste del volumen
- Disfrutar de una experiencia envolvente realista (IMMERSIVE AE)
- Ajuste del efecto de sonido concebido para fuentes de sonido (modo de sonido)
- Mejora de la claridad de los diálogos (VOICE)
- Disfrutar de un sonido claro con un volumen bajo a medianoche (NIGHT)
- Ajuste del retardo entre la imagen y el sonido
- Disfrutar de sonido de emisión multiplex (AUDIO)
- Ajuste del volumen de los diálogos durante la reproducción de contenidos DTS:X
- Uso del sistema de altavoces de forma sincronizada con un televisor
- Modificación de los ajustes
- Solución de problemas
- Información adicional
51
US
The speaker system does not power
up.
Check that the AC power cord (mains
lead) is connected securely.
Disconnect the AC power cord (mains
lead) from the wall outlet (mains), and
then reconnect after several minutes.
The speaker system does not turn
on even when the TV is turned on.
Set [Setup] - [Advanced Settings]
- [HDMI Settings] - [Control for HDMI]
to [On]. The TV must support the
Control for HDMI function (page 42).
For details, refer to the operating
instructions of your TV.
Check the speaker settings of the TV.
The speaker system power syncs with
the speaker settings of the TV. For
details, refer to the operating
instructions of your TV.
Depending on the TV, if the sound
was output from the speakers of the
TV the previous time, the speaker
system may not turn on by
interlocking with the TV power even
when the TV is turned on.
The speaker system turns off when
the TV is turned off.
Check the setting of [Setup] -
[Advanced Settings] - [HDMI Settings]
- [Standby Linked to TV]. When
[Standby Linked to TV] is set to [On] or
[Auto], the speaker system turns off
automatically when you turn off the
TV.
The speaker system does not turn
off even when the TV is turned off.
Check the setting of [Setup] -
[Advanced Settings] - [HDMI Settings]
- [Standby Linked to TV]. To turn the
speaker system off automatically,
regardless of the input when you turn
off the TV, set [Standby Linked to TV]
to [On]. The TV must support the
Control for HDMI function (page 42).
For details, refer to the operating
instructions of your TV.
The speaker system cannot be
turned off.
The speaker system may be in demo
mode. To cancel demo mode, reset
the speaker system. Press and hold
(power) and – (volume) on the bar
speaker for more than 5 seconds
(page 58).
There is no picture or the picture is
not output correctly.
Select the appropriate input
(page 24).
When there is no picture while the TV
input is selected, select the TV
channel that you want using the TV
remote control.
When there is no picture while the
HDMI input is selected, press the
playback button of the connected
device.
Disconnect an HDMI cable, then
connect it again. Make sure that the
cable is firmly inserted.
When there is no picture from the
connected device or the picture from
the connected device is not output
correctly, change the setting of
[Setup] - [Advanced Settings] -
[HDMI Settings] - [HDMI Signal
Format] - [HDMI IN 1]/[HDMI IN 2]. For
details, refer to Help Guide.
The speaker system is connected to
an input device that is not HDCP
(High-bandwidth Digital Content
Protection) compliant. In this case,
check the specifications of the
connected device.
The picture on the TV screen is
distorted.
Interference of the wireless function
between the TV/other wireless
devices and the speaker system may
have occurred. Install the speaker
Power
Picture